Kirsch LABO laboratory refrigerators

Professional laboratory refrigerators that meet the highest standards of quality and documentation.


% KIRSCH LABO-720-CHROMAT PRO-ACTIVE laboratory refrigerator This laboratory fridge has a glass door, an integrated power outlet strip with 3 sockets and a cable bushing with a diameter of approximately 7 cm fitted as standard. The cable bushing is located in the middle of the right side panel. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 5 shelves, height-adjustable • Castors • Warning in case of power failure (optical and acoustic) • Insulating glass door and interior light • Built-in 3-way-socket • Access port for cables and probes • diameter app. 7 cm • Re-circulating air cooling • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Rapid defrosting • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Low-noise compressor • Potential free contact for alarm transmission • Low-noise compressor • Lockable door Options • Insulating glass door • Adjustable feet to compensate for uneven floors. • Lock for glass door • Additionals shelves on mountings or support rails • Additional drawers on telescopic runner (57x40x5,6 cm): max. 12 pieces • Additional lenght and cross dividers for drawers • Aluminium trays or baskets with support rails • Meltwater tray for manual emptying • Cooling machine with cold water connection • Cooling machines with natural refrigerant • Outer panels in stainless steel 4301 • GSM-Modul • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Disc-type pen-recording thermometer with 7-day measuring cycle with 100 recording discs and 5 felt tip pens • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 720 l • Temperature setting (approx.): +2 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 Hz • Power consumption: 250 Watts • Average consumption: 1,63 KWh / 24 h • Overall dimensions (incl. distance from wall): 77 x 98 x 195,5 (w x d x h in cm) • Interior dimensions: 62 x 77 x 140 (w x d x h in cm) • Overall dimensions with door opened at 90°: 77 x 165 (w x d in cm) • Shelf dimensions: 59 x 65 (w x d in cm) • Max. loading capacity per shelf: 40 kg • Weight: 145 kg / 174 kg (net / gross)	% KIRSCH LABO-720 PRO-ACTIVE laboratory refrigerator This laboratory refrigerator has 5 vertically adjustable and plastic coated shelves which rest on mountings. This laboratory refrigerator can optionally be fitted with a glass door. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 5 shelves, height-adjustable • Castors. • Re-circulating air cooling • Warning in case of power failure (optical and acoustic) • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Rapid defrosting • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software • Potential free contact for alarm transmission • Low-noise compressor Options • Insulating glass door with lock • Adjustable feet to compensate for uneven floors. • Shelves on mountings or support rails • Additional drawers on telescopic runners (57x40x5,6 cm): max. 12 pieces • Additional lenght and cross dividers for drawers • Aluminium trays or baskets with support rails • LED illumination mounted at side wall • Meltwater tray for manual emptying • Cooling machine with cold water connection • Cooling machines with natural refrigerant • Outer panels in stainless steel 4301 • GSM-Modul • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Disc-type pen-recording thermometer with 7-day measuring cycle with 100 recording discs and 5 felt tip pens • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 700 l • Temperature setting (approx.): +2 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 Hz • Power consumption: 250 Watts • Average consumption: 1,46 KWh / 24 h • Overall dimensions • (incl. distance from wall): 77 x 98 x 195,5 (w x d x h in cm) • Interior dimensions: 62 x 77 x 140 (w x d x h in cm) • Overall dimensions with door • opened at 90°: 77 x 165 (w x d in cm) • Shelf dimensions: 59 x 65 (w x d in cm) • Max. loading capacity per drawer/shelf: 40 kg • Weight: 145 kg / 174 kg (net / gross)	% KIRSCH LABO-520 PRO-ACTIVE laboratory refrigerator This laboratory refrigerator has 5 vertically adjustable and plastic coated shelves which rest on mountings. The shelves can optionally rest onsupport rails. Drawers, aluminium trays and wire baskets are available as well. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • Castors • 5 shelves, height-adjustable • Re-circulating air cooling • Warning in case of power failure (optical and acoustic) • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission • Low-noise compressor • Lockable door Options • Insulating glass door with lock • Adjustable feet to compensate for uneven floors. • Shelves on mountings or support rails • Additional drawers on telescopic runners (57x40x5,6 cm): max. 12 pieces • Additional length and cross dividers for drawers • Aluminum trays or baskets with support rails • LED illumination mounted at side wall • Meltwater tray for manual emptying • Cooling machine with cold water connection • Cooling machines with natural refrigerant • Outer panels in stainless steel 4301 • GSM-Modul • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Temperature probe PT 100 or PT 1000, 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 500 l • Temperature setting (approx.): +2 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 Hz • Power consumption: 250 Watts • Average consumption: 1,40 KWh / 24 h • Overall dimensions (incl. distance from wall): 77 x 76 x 195,5 (w x d x h in cm) • Interior dimensions: 62 x 57 x 140 (w x d x h in cm) • Overall dimensions with door opened at 90°: 74 x 144 (w x d in cm) • Shelf dimensions: 59 x 45 (w x d in cm) • Max. loading capacity per drawer/shelf: 40 kg • Weight: 120 kg / 148 kg (net / gross)	% KIRSCH LABO-468 PRO-ACTIVE laboratory refrigerator This laboratory refrigerator has 4 vertically adjustable and plastic coated shelves which rest on mountings. The shelves can optionally rest on support rails. Drawers, aluminium trays and wire baskets are available as well. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 4 shelves, height-adjustable • Re-circulating air cooling • Warning in case of power failure (optical and acoustic) • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission • Low-noise compressor • Lockable door Options • Insulating glass door • Lock for glass door • Decorative frame • 60 Hz cooling machine upon request • Castors • Additional shelves on mountings or support rails • Additional drawers on telescopic runners (57x43x5,6 cm): max. 12 pieces • Additional lenght and cross dividers for drawers • Aluminium trays or baskets with support rails • LED illumination mounted at side wall • Meltwater tray for manual emptying • GSM-Module • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 460 l • Temperature setting (approx.): +2 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 Hz • Power consumption: 170 Watts • Average consumption: 1,00 KWh / 24 h • Overall dimensions (incl. distance from wall): 74 x 80 x 181 (w x d x h in cm) • Interior dimensions: 60 x 57 x 128 (w x d x h in cm) • Overall dimensions with door opened at 90°: 74 x 144 (w x d in cm) • Shelf dimensions: 59 x 50 (w x d in cm) • Max. loading capacity per drawer/shelf: 24 kg / 40 kg • Weight: 109 kg / 122 kg (net / gross)
% KIRSCH LABO-340 PRO-ACTIVE laboratory refrigerator The laboratory fridge comes with 1 drawer and 4 shelves as standard. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 1 drawer and 4 shelves, height- adjustable • Re-circulating air cooling • Warning in case of power failure (optical and acoustic) • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission • Lockable door Options • Insulating glass door • Lock for glass door • Decorative frame • Castors • Additional s helves on mountings or telescopic runners • Additional drawers on telescopic runners: max. 10 pieces • Additional lenght and cross dividers for drawer • LED illumination mounted at side wall • Meltwater tray for manual emptying • GSM-Module • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 330 l • Temperature setting (approx.): +2 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 Hz • Power consumption: 110 Watts • Average consumption: 0,65 KWh / 24 h • Overall dimensions (incl. distance from wall): 67 x 69 x 181 (w x d x h in cm) • Interior dimensions: 53 x 45 x 128 (w x d x h in cm) • Overall dimensions with door opened at 90°: 67 x 127 (w x d in cm) • Drawer inner dimensions: 50,4 x 32 x 5,6 (w x d x h in cm) • Shelf dimensions: 53 x 39 • Max. loading capacity per drawer/shelf: 16 kg / 40 kg • Weight: 88 kg / 100 kg (net / gross)	% KIRSCH LABO-288 PRO-ACTIVE laboratory refrigerator This laboratory fridge comes with 3 shelves as standard. The refrigerator can also be equipped with power failure alarm against surcharge. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 3 shelves, height- adjustable • Re-circulating air cooling • Warning in case of power failure (optical and acoustic) • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission • Lockable door Options • Decorative frame • Glass door with lock • 60 Hz cooling machine upon request • Castors • Door fitting • Condensate container • Plastic-drawer on roller runners • Aluminium-drawer on roller runners • Stainless steel-drawer • Additional shelf on rails or overlays • Additional lenght and cross dividers for drawer • LED illumination mounted at side wall • GSM-Module • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity 280 l • Temperature setting (approx.) +2 to +15 °C • Voltage : 220 - 240 V • Frequency: 50 Hz • Power consumption: 88 Watts • Average consumption: 0,68 KWh / 24 h • Overall dimensions (incl. distance from wall): 67 x 75 x 124 (w x d x h in cm) • Interior dimensions: 53 x 50 x 100 (w x d x h in cm) • Overall dimensions with door opened at 90°: 67 x 135 (w x d in cm) • Shelf dimensions: 52 x 39 (w x d in cm) • Max. loading capacity per drawer/shelf: 40 kg • Weight: 78 kg / 85 kg (net / gross)	% KIRSCH LABO-100 PRO-ACTIVE laboratory refrigerator This laboratory refrigerator can be installed normally as well as in an undercounter installation. Door coupling fittings or decorative frames are available at an extra cost. When the device is being installed as a stand-alone unit we can optionally supply a matching tabletop. • PRO-ACTIVE- Control: • Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 2 shelves • Re-circulating air cooling • Undercounter type • Warning in case of power failure (optical and acoustic) • Automatic defrosting • Melt water evaporation • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission • Low-noise compressor (noise level I; sounds perception: whisper) • Lockable door Options • Glass door with lock • Work surface • 60 Hz cooling machine upon request • Decorative frame • Door fitting • Castors • Additional shelf or drawer • Additional length and cross dividers • Melt water tray for manual emptying • GSM-Module • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with 2 waxed paper strips • Temperature probe PT 100 or PT 1000, 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical Specifications • Capacity 95 l • Temperature setting (approx.) +2 to +15 °C • Voltage 220 - 240 V • Frequency 50 Hz • Power consumption 76 Watts • Average consumption 0,64 KWh / 24 h • Overall dimensions • (incl. distance from wall) 54 x 54 x 82 (w x d x h in cm) • Interior dimensions 44 x 43 x 47 (w x d x h in cm) • Overall dimensions with door • opened at 90° 54 x 106 (w x d in cm) • Drawer inner dimensions 40 x 32 x 5,6 (w x d x h in cm) • Shelf dimensions 43 x 36 (w x d in cm) • Max. loading capacity per drawer/shelf 13 kg / 25 kg • Weight 46 kg / 50 kg (net / gross)

Kirsch LABO laboratory refrigerators

Filters by category