All products

Lab washer, steam/electrically heated – single door, w/ pre-heating and recycling tank, 1150 mm wide, 351 l usable cap
• Construction type: Freestanding, 1 glass vertical sliding door
• Front/back/side panels: Stainless Steel
• Electric door lock
• Buzzer, acoustic signal at end of programme
Control system
• Control type PST 20, full-touch colour display
• Programmable
• Selectable display languages
Standard electrical connection
• Total rated load in kW: 20,00
Water connection/drainage
• Cold water [number]: 2
• Hot water [number]: 1
• DI water [number]: 2
• Required flow pressure in kPa: 200-1000
Compressed air connection
• Compressed air connection, technical [number]: 1
Drying unit
• Air throughput in m³/h: 250
• HEPA filter class H13, HEPA filter filtration efficiency (DIN EN 1822) in %: 99,95
Features
• 2 integrated diaphragm dispenser pumps for liquid media
• 4 additional integrated dispenser pumps
• Variable-speed pump
• EasyLoad
• Spray arm monitoring
• Setting options for process chemicals (4 x 10 l)
• Wash cabinet made from high-quality stainless steel (1.4404/316L)
Connection options
• Ethernet interface, External dispensing modules, USB interface, Central dispensing, Peak-load negotiation / energy management

For the optimum loading of injector modules or inserts.
• Area of application: reprocessing pipettes/vials and laboratory glassware
• Upper basket with two module connections
• For holding up to 2 injector modules or inserts
• Automatic closing of the connections when not in use
• Loading height with module with plastic supports 190 mm
• Clearances: width 489, length 440 mm

Machine affiliation:
PLW 8636 [LAB / LAB MON]
PG 8504
PG 8583
PG 8583 CD
PG 8593
PLW 8604
PLW 8683
PLW 8683 CD
PLW 8693

A temperature control cabinet that can do it all, the KB PRO is our most powerful cooling incubator. With a temperature range of -20°C to +100°C and comprehensive programming options, it covers a wide range of applications that extend well beyond incubation. Optional light modules are also available to turn the KB PRO into a chamber for ICH photostability testing or plant growth.

Product features

• Temperature range: -20°C to +100°C
• Proven APT.line™ preheating chamber technology
• Energy-efficient cooling with modern inverter cooling unit
• Cooling with climate-neutral R-290 refrigerant
• Door heating to prevent condensation
• Adjustable fan speed
• Housing design with HIT technology
• Stainless-steel inner chamber
• Inner doors made of metal oxide-coated safety glass
• Two racks with stainless-steel telescopic rails
• Large access port with silicone plug
• Floor-standing units featuring robust twin casters with brakes at the front
• Stackable tabletop units with a volume of up to 130 liters
• Intuitive touchscreen controller with time-segment and real-time programming
• Ergonomically adjustable control terminal (for units with a volume of 470 liters and above)
• Signal triangle with light-up status display (for units with a volume of 470 liters and above)
• Internal data logger, measured values can be read out in open format via USB
• Class 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarms
• Unit self-test for comprehensive status analysis
• Data interfaces: Ethernet, USB
• BINDER Multi Management Software APT-COM™ basic edition
• Optional light modules for ICH photostability testing (for models 260, 470, 720)
• Optional LED light modules for plant growth (for models from 260)

The Sigma 3‑18KHS refrigerated or actively heated centrifuge is the perfect choice for everyone who is looking for a broad range of operating options. The centrifuge enables RCF values of more than 30,000 x g and is very convenient in use thanks to the patented Spincontrol S one-knob control and automatic lid lock. Combined with the extensive range of rotors and accessories, this all-purpose centrifuge sets standards for versatility and performance.
The Sigma 3‑18KHS is ideal for use in the industrial sector for sedimentation of liquid media at relatively high temperatures.

What makes the Sigma 3‑18KHS all-purpose centrifuge so attractive
The Sigma 3‑18KHS makes work processes in laboratory operation more efficient, safer and more convenient. The benchtop centrifuge has an extraordinary capacity with a maximum of 4 x 400 ml. The Sigma 3‑18KHS is nicely complemented by a large selection of fixed-angle and swing-out rotors, buckets and adapters, including many biosafe configurations. Particularly thanks to the ability to use fixed-angle rotors with high RCF, the centrifuge covers a distinctly broader spectrum of applications compared to competitive units.

Aplications: Food labs, Universities & colleges, Pharmaceutical labs, Environmental labs, Oil industry

Product options: Inert gas port, Biosafe swing-out and fixed-angle rotors

The Sigma 3‑18KHS is also available as the Sigma 3‑18KS refrigerated centrifuge.

Laboratory refrigerators and freezers are expected to provide the highest levels of safety and reliability. Precise electronic control, fan-assisted cooling, and highly efficient insulation result in outstanding energy efficiency, ensuring low operating costs and environmental protection. Advanced components and precise regulation ensure optimal storage of materials.

Product Features

Easy Operation
User-friendly solutions for daily use

• Built-in handle along the full height of the door
• Monochrome electronic control panel with 3 touch buttons
• Easy-to-clean stainless steel interior lining
• The door stays open at angles greater than 90°
• Flush-mounted interior ceiling LED lighting

Compliance and Documentation
Built-in safety features to protect sensitive materials

• Temperature setting (calibration)
• Logging of minimum/maximum temperature values
The recorded minimum and maximum internal temperatures are saved and can be easily read from the display.
• Connectivity available as an upgrade (LAN or WiFi for BMS or SmartMonitoring systems)
• Standard compliance: IEC 60068-3, IEC 61010-2-011

Safety and Reliability
Reliable storage thanks to consistent cooling performance, even in extreme ambient temperature conditions

• Temperature stability up to: ±3 °C (refrigerator) / ±5 °C (freezer)
• Alarm relay
Alarm transmission to the monitoring system ensures no deviations go unnoticed.
• The door automatically closes if opened at less than a 90° angle.
• Probe access opening: 10 mm in diameter
• Mechanical door lock
• Long lifespan

Technical Data

• Gross/net volume: 1391/1091 L
• External dimensions (W/D/H) mm: 1427/867/2135
• Internal dimensions (W/D/H) mm: 1210/638/1470
• Energy consumption/year: 464 kWh
• Ambient temperature: +10 °C to +35 °C
• Heat emission: 520 kJ/h
• Refrigerant: R 290
• Noise level: 60 dB(A)
• Frequency/voltage: 50 Hz / 220-240 V~
• Fan-assisted cooling system
• Automatic defrost
• Temperature range: -2 °C to +16 °C
• External casing/color: steel / white
• Interior lining: chrome-nickel steel (1.4301 / AISI 304)
• Door/Cover material: steel
• Network connectivity via SmartModule, available as an upgrade
• WLAN/LAN connection: optional
• Adjustable shelves: 8
• Shelf material: steel with plastic coating
• Usable shelf size (W/D) mm: 480 / 638 mm
• Shelf load capacity: 60 kg
• Castors: 5 rotating castors, 2 with brakes
• Probe access: 1 x Ø 12 mm
• Door opening direction: left fixed / right fixed
• Gross/net weight: 225/200 kg

FOB – BENCHTOP LAB STERILIZER
HIGH-PERFORMANCE AND MODULAR DESIGN.
Applications: Food, Bio-Pharmaceutical, Cosmetics, Microbiology, Packaging
Loads: Canned food, Sealed & unsealed containers, Large volume parenterals, Machine parts, Blood bags, Syringes, Tools, Wrapped tools, Culture Media, Garments, Glassware
Processes: Sterilization
Useful chamber capacity: 122
FOB is a benchtop lab sterilizer that combines excellent performance with high quality materials, ease of use and reduced utilies consumption.
The FOB series are suitable for many different applications, making it the perfect choice to satisfy modern laboratory needs. FOB series autoclaves combines technology and know-how, and can be used by very different laboratories, such as:
• Private and public microbiology labs.
• High schools and Universities.
• Research institutes, life sciences and biotech labs.
• Clinical diagnostic labs.
• Agriculture, environmental and veterinary labs.
• Material testing laboratories.
• Quality control lab´s in pharma, food/beverage, chemistry/cosmetics and other industrial sectors.
FOB may be adapted to satisfy various laboratory applications and the treatment of many different types of loads, including waste with high pathogen risk, in addition to solid porous goods, packaged items and liquid/media, in open and sealed containers.
FOB series autoclaves are used in highly specialized fields thanks to a wide selection of options on a modular system. Hence, FOB sterilizers can be configured to meet the most demanding user’s requirements.
DESIGN AND TECHNICAL FEATURES
A unique opening/closing door system with patented pneumatic gasket seal guarantees perfect airtight, maximum reliability and improved safety for operators. Moreover, FOB autoclaves can be equipped with safety device to prevent door opening.
Chambers, pneumatic valves and hydraulic components are made of 316L stainless steel, with sanitary electropolished finishing. FOB is designed to assure wide and easy access to technical area for maintenance activities.
Easy installation and quick connection to the utilities makes FOB series autoclave even more attractive. To assure energy savings, FOB has a heat exchanger recovery system installed out of the chamber to reuse the heat of condensate for water pre-heating before the steam generation.
FOB series is equipped with DCS 20 process controller: 30 cycles easy to customize in a multi-user environment. Large touch-screen color display and interface for remote monitoring via Ethernet control. DCS 20 process controller is fully validated and documented.
KEY BENEFITS
• Modular concept: extremely flexible configuration.
• Energy saving system.
• Increase of the maximum temperature and the pressure
• Adjustable operator display for an ergonomic postioning.
• Space optimization: load capacity improved
• Extensive choice of loading equipment (racks, adjustable shelves, baskets, etc.).
• High level of programming with 30 configurable cycles .
• Special test programs (i.e. Bowie-Dick, vacuum, pressure leak, etc.) for routine check of sterilizer efficiency.
COMPLIANCE TO
• PED Directive 2014/68/UE – Pressure equipment
• Machine Directive Macchine 2006/42/EC
• EMC Directive 2014/35/UE
• LVD Directive 2006/95/UE

The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability.

Standard Equipment
• Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity
• Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C
• Thermocouple type N (1100 °C)
• Ceramic heating plates with integral heating element which is safeguarded and easy to replace
• With lift door (LT)
• Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
• Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
• Adjustable air inlet integrated in door (see illustration)
• Exhaust air outlet in rear wall of furnace
• Controller with touch operation B510 (5 programs with each 4 segments)
• Solid state relays provide for lownoise operation

Option
• Chimney, chimney with fan or catalytic converter (not for L 1 and L 15)
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight
• Manual or automatic gas supply system
• Port for thermocouple in the rear wall or in the furnace door

Ashing furnace LV(T) .. 11 is designed especially for ashing processes to 1050 °C in the laboratory. Applications include determining loss on ignition, ashing food and plastics for subsequent substance analysis. A special fresh-air and exhaust air system ensures that the air is replaced 6 times per minute so that there is always sufficient oxygen for the ashing process. Incoming air passes the furnace heating and is pre-heated to ensure good temperature uniformity.

Standard Equipment
• Heating from two sides
• Ceramic heating plates with integral heating element which is safeguarded, and easy to replace
• Air exchange of more than 6 times per minute
• Good temperature uniformity due to preheating of incoming air, temperature uniformity according to DIN 17052-1 to +/− 10 °C in the defined empty work area (from 550 °C)
• Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
• Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP)
• Suitable for many standardized ashing processes according to ISO, ASTM, EN, and DIN
• With lift door (LVT)
• Solid state relays provide for lownoise operation
• Controller C550 (10 programs with each 20 segments)

Option
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Port for thermocouple in the rear wall or in the furnace door

Heating elements on support tubes radiating freely into the furnace chamber provide for particularly short heating times for these muffle furnaces. Thanks to their robust lightweight refractory brick insulation, they can reach a maximum working temperature of 1300 °C. These muffle furnaces thus represent an interesting alternative to the familiar L(T) ../12 models, when you need a higher application temperature.

Standard Equipment
• Heating from two sides
• Heating elements on support tubes ensure free heat radiation and a long service life
• Multi-layer insulation with robust lightweight refractory bricks in the furnace chamber
• Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
• With lift door (LT)
• Adjustable air inlet in the furnace door
• Exhaust air outlet in rear wall of furnace
• Solid state relays provide for lownoise operation
• With Controller C550 (10 programs / 20 steps)

Option
• Chimney, chimney with fan or catalytic converter
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight
• Manual or automatic gas supply system
• Port for thermocouple in the rear wall or in the furnace door

This table accepts up to five tube holders, each with a capacity of 24 x 50ml tubes. Each tube holder has its own clamp handle allowing it to be easily taken out of the incubator shaker and put on a clean bench while the other tubes keep on shaking. It’s also possible to shake microtiter plates on the EPFL-table, using Duetz 4-place coverclamps. If you have a Kuhner F-size tray (800 x 420mm), you can also clamp that on the table instead of individual holders.

• Test tube holder RGH-32 (14 tubes)
• For 14 test tubes with 32 - 33 mm diameter

Clamp U-200 for Erlenmeyer flasks with 200 ml vol.

Tray with fixed clamps E-1000 To load 9 Erlenmeyer flasks with a volume of 1000 ml

Storage tanks in grey PP with sloping tank bottom for storing purified water from reverse osmosis systems. Closed and opaque design, round, including manhole for cleaning. The tank comes completely piped and is available with optional accessories.
• Input connection: R ¾''
• Drain connection: R 1¼''
• Volume (l): 500
• Dimensions (Ø x height, mm): 780 x 1100
• Net weight (kg): 20

Up to 10 bar pressure-resistant, stainless steel, empty cartridge for ion exchange resin.
• Material: stainless steel – AISI 316
• Dimensions mm (Ø x height): 240 x 1155
• Connection: R ¾ "

• Tmax 1100 °C
• Dimensions 190 x 170 x 20 mm
• For models LE 4, LE 6, L 5, LT 5, LV 5, LVT 5

Ice scraper is available for cleaning ice built up on door gasket, PEP and other places in the freezer.

Frontier rotors extend the functionality of Frontier centrifuges by increasing the number of tubes of varied types and sizes that can be used in conjunction with each of the centrifuge models. Easy to clean and operate, the rotors are durably constructed to withstand demanding centrifugation.

Compatible adapters and other accessories:
• Adapter, 1x50ml D29mm RB, 2/pk (30304373); Adapter, 1x50ml D30mm FA, 2/pk (30304374); Adapter, 2x30ml D26mm RB, 2/pk (30304372); Adapter, 4x15ml D17mm FA, 2/pk (30304371); Adapter, 5x10ml D16mm RB, 2/pk (30304370); Adapter, 8x1.5ml D11mm, 2/pk (30304369)

Upper basket with 156 unoccupied injector slots for nozzles with Ø 2.5 mm.
• Area of application: reprocessing laboratory glassware
• Only suitable for use on upper levels

Machine affiliation: Can be used for PLW 6111 devices.

The Pioneer PX combines essential weighing functionality with competitive performance, offering high accuracy and repeatability for applications in laboratory, industrial and education settings. The PX is affordably priced, and intuitively designed for intelligent operation with a second line display for additional information, and USB and RS232 connectivity for easy communication.
• Applications
Basic Weighing, Parts Counting, Percent Weighing, Animal Weighing, Density Determination
• Display
Backlit Liquid Crystal Display (LCD); Second line display for additional information or guidance (dot matrix)
• Operation
AC adapter (included)
• Communication
RS232 and USB device (included); GLP/GMP data output with real-time clock
• Construction
Metal base, plastic top housing, removable stainless steel pan, glass draftshield, integrated weigh-below-hook, security bracket, calibration lock and in-use cover
• Design Features
User-selectable environmental filters and brightness settings, auto-tare, auto-dim, user-selectable span calibration points, software lockout and reset menu, userselectable communication settings and data print options, user-definable project and user IDs, software overload/underload indicator, stability indicator, four operating languages