All products

Tray with fixed clamps E-3000 For four 3000 ml Erlenmeyer flasks

Storage tanks in black PP for storing pure water from reverse osmosis systems. Closed rectangular design, including 400 mm manhole with lid and tension ring as well as galvanised steel bandages.
• Volume (l): 2000
• Size (L x W x H (mm): 2070x720x1690
• Net weight (kg): 110
• Input connection: R ¾''
• Drain connection: R 1¼''"

Stakpure DS ion exchange cartridge - stainless-steel, pressure-resistant to 10 bar
For any situation requiring up to 2500 litres of demineralised water an hour. A sophisticated flow system for incoming water ensures a fast and effective flow of water through the mixed-bed system with ion-exchange resins.
• Flow rate: 11000 l/h
• Capacity for 10° total dissolved solids: 7000 l
• Pure water quality: 0,1 - 20 μS/cm
• Max. water temperature: 30 °C
• Material: stainless steel – AISI 316
• Dimensions mm (Ø x height): 363 x 850
• Connection: R ¾ "
• Weight, approx.: 70 kg

• Tmax 1100 °C
• Dimensions 270 x 340 x 20 mm
• For models L 24, LT 24

Extra shelves are available and each shelf comes with 4 clips.

Frontier rotors extend the functionality of Frontier centrifuges by increasing the number of tubes of varied types and sizes that can be used in conjunction with each of the centrifuge models. Easy to clean and operate, the rotors are durably constructed to withstand demanding centrifugation.

Compatible adapters and other accessories:
• Adapter, 48x1.5/2.0ml D11mm, 2/pk (30314891); Bucket, 3xMTP, 2/pk (30314890)

Chemistry diaphragm pumps of the NT design are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms for increased reliability and extended operating life. The eight cylinders pump ME 16C NT provides a particularly high performance together with a compact design. Upgraded with an outlet exhaust vapor condenser (EK) the ME 16C NT +EK provides an environmental friendly system with efficient solvent recovery. Eight-cylinder NT pumps feature quiet operation, smooth and easy to clean surfaces.

Performance features
• outstanding chemical resistance and superior vapor tolerance
• very high pumping speed even at low vacuum levels
• compact design
• whisper quiet and very low vibration
• excellent environmental friendliness due to efficient solvent recovery

The Pioneer PX combines essential weighing functionality with competitive performance, offering high accuracy and repeatability for applications in laboratory, industrial and education settings. The PX is affordably priced, and intuitively designed for intelligent operation with a second line display for additional information, and USB and RS232 connectivity for easy communication.
• Applications
Basic Weighing, Parts Counting, Percent Weighing, Animal Weighing, Density Determination
• Display
Backlit Liquid Crystal Display (LCD); Second line display for additional information or guidance (dot matrix)
• Operation
AC adapter (included)
• Communication
RS232 and USB device (included); GLP/GMP data output with real-time clock
• Construction
Metal base, plastic top housing, removable stainless steel pan, glass draftshield, integrated weigh-below-hook, security bracket, calibration lock and in-use cover
• Design Features
User-selectable environmental filters and brightness settings, auto-tare, auto-dim, user-selectable span calibration points, software lockout and reset menu, userselectable communication settings and data print options, user-definable project and user IDs, software overload/underload indicator, stability indicator, four operating languages

Mobile unit no levels, for cleaning laboratory glassware/utensils.
• For loading modules and inserts
Depending on the height, up to 9 modules can be used
Using the A 606 module at levels 2 and 3 results in the following loading heights: Level 1: 205 mm, Level 2: 205 mm, Level 3: 215 mm
• Some rails and struts can be removed. This enables particularly tall modules to be used.

Machine affiliation:
PLW 8615
PLW 8616
PLW 8617

VALEGRO recirculating coolers with additional heating function have an extended working temperature range from -20 to +85 °C. The pump can be easily adjusted in user-friendly, percentage-based stages.

Whether in the laboratory, research, or production, the VALEGRO 801H recirculating coolers offer a constant cooling capacity of 0.8 kW at 20 °C, supporting stable processes around the clock. These modern units offer precise temperature control for a wide range of applications and, thanks to their compact design, fit seamlessly into any working environment. The refrigeration circuit uses an eco-friendly, natural refrigerant.

When designing the VALEGRO recirculating coolers, the focus was on maximum user-friendliness. Many helpful features such as a timer function, a removable venting grid that does not require tools, and an illuminated and simple to clean level indicator make daily work easier. The inclined OLED touch display is easy to read and ergonomic to use. The intuitive menu navigation allows quick access to all functions. Warning notices and system messages are displayed in clear, understandable language, ensuring maximum safety when using the device.

In addition to RS232 and USB-C interfaces, VALEGRO recirculating coolers are also available with Ethernet (optional). All interfaces are located directly below the display and are easy to use from the front.

FOB4 – STAND-ALONE LAB STERILIZER
HIGH FLEXIBILITY. PROCESS OPTIMIZATION.
Applications: Food, Bio-pharmaceutical, Cosmetics, Microbiology, Packaging
Loads: Canned food, Sealed & unsealed containers, Large volume parenterals, Machine parts, Blood bags, Syringes, Tools, Wrapped tools, Culture media, Garments, Glassware
Processes: Sterilization
Useful chamber capacity: 210 liter
The FOB4 Stand-alone Lab Sterilizer is an autoclave that combines excellent performances with overall high quality materials and ease of use.
The FOB4 Lab Sterilizer is suitable for the use in laboratory for many different applications, such as:
• Microbiology and analytical labs.
• Research institutes and examination agencies.
• Bio-Technologies and life sciences.
• Animal facility and clinical diagnostic labs.
• Pharmaceutical, food, chemistry industries, QC labs.
• Agricultural, environmental and veterinary labs.
These sterilizers have been specially designed with ergonomical features for easy handling of higher volume sterilization materials and goods as: glassware, media preparation, liquids, in open and sealed containers, mixed regular and high risk waste, as well as surgery instruments, textiles, rubber articles and packaged tools.
FOB4 Stand-alone Lab Sterilizer is easy to be configured, thanks to its conceptual design and modular construction with a convenient portfolio of optional kits. In fact, all the models can be configured using various customized systems guaranteed by the wide range of processes, software options and an extensive choice of accessories. Please, click on the link “recommended kit” to check out all possible configurations referred to FOB4 series.
DESIGN AND TECHNICAL FEATURES
FOB4 can be designed in two chamber dimensions: 147 liters (FOB4-TS) with single vertical sliding door or 210 liters (FOB4S-TS – FOB4/L TS) with double vertical sliding door for pass-through purposes. The vertically automatic sliding doors are pneumatically activated for space efficiency in laboratory and hospitals.
FOB4 autoclave has internal 316L stainless steel plates fed by steam used both as heat-exchanger system for steam pre-heating and to cool the chamber temperature by means of cold softened water. As an option these plates can be used for drying purposes at the end of the cycle.
Fedegari designs laboratory autoclaves combining operators’ safety as well as equipment performances. Thermal blocking system to prevent door openings in hazardous situations. Temperature probes and pressure transducers ensure constant process monitoring, as well as precision and optimal temperature distribution in the chamber, guaranteeing a high level of safety for the operator and performance and reproducibility of the sterilization process.
FOB series is equipped with DCS20 process controller: 30 cycles easy to customize in a multi-user environment. Large touch-screen color display and interface for remote monitoring via Ethernet control. DCS20 process controller is fully validated and documented.
KEY BENEFITS
• Energy and water cost-saving.
• Small foot print with superior loading capacity.
• Ergonomic positioning of adjustable operator display.
• Full and easy accessibility to technical area from front and lateral sides.
• Special test programs for routine check of sterilizer efficiency.
• GAMP5 compliant.
• GLP compliant.
• Reduced process time.
• Flexible process machine
COMPLIANCE TO
PED Directive 2014/68/UE – Pressure equipment
Machine Directive Macchine 2006/42/EC
EMC Directive 2014/35/UE
LVD Directive 2006/95/UE

The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability.

Standard Equipment
• Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity
• Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C
• Thermocouple type N (1100 °C)
• Ceramic heating plates with integral heating element which is safeguarded and easy to replace
• With flap door (L)
• Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
• Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
• Adjustable air inlet integrated in door (see illustration)
• Exhaust air outlet in rear wall of furnace
• Controller with touch operation B510 (5 programs with each 4 segments)
• Solid state relays provide for lownoise operation

Option
• Chimney, chimney with fan or catalytic converter (not for L 1 and L 15)
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight
• Manual or automatic gas supply system
• Port for thermocouple in the rear wall or in the furnace door

A powerful all-rounder among constant climate chambers: Equipped with all kinds of sophisticated technology, the KBF PRO takes any material test in its stride – whether it takes place at -20°C or under THB conditions at +85°C and 85% relative humidity. It offers flexible water supply options for all installation sites and consumes up to 40% less energy than its predecessor, the KMF model.

Product features

• Temperature range: -20°C to +100°C
• Humidity range: 10% to 98% RH
• Proven APT.line™ preheating chamber technology
• Up to 40% lower energy consumption compared to the previous model
• Energy-efficient cooling with modern inverter cooling unit
• Cooling with climate-neutral R-290 refrigerant
• Door heating to prevent condensation
• Adjustable fan speed
• Humidity regulation with capacitive humidity sensor and responsive steam humidification
• Housing design with HIT technology
• Stainless-steel inner chamber
• Inner doors made of metal oxide-coated safety glass
• Two racks with stainless-steel telescopic rails
• Large access port with silicone plug
• Floor-standing units featuring robust twin casters with brakes at the front
• Stackable tabletop units with a volume of up to 130 liters
• Intuitive touchscreen controller with time-segment and real-time programming
• Ergonomically adjustable control terminal (for units with a volume of 470 liters and above)
• Signal triangle with light-up status display (for units with a volume of 470 liters and above)
• Internal data logger, measured values can be read out in open format via USB
• Class 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarms
• Unit self-test for comprehensive status analysis
• Data interfaces: Ethernet, USB
• BINDER Multi Management Software APT-COM™ basic edition
• Optional light modules for ICH photostability testing (for models 260, 470, 720)
• Optional LED light modules for plant growth (for models from 260)

The most powerful, single-stage, highly dynamic temperature control systems

The water-cooled PRESTO W58x is able to quickly and efficiently control the temperature in applications requiring a great deal of power. This model features has an impressive cooling capacity of 33 kW at 20°C, thus ensuring that it maintains large power reserves over its entire working temperature range, especially at temperatures around -30°C to -40°C, which are often necessary for automotive testing.

The PRESTO W58x process system is equipped with a gear pump. As a result, bath fluids with a high viscosity, such as water-glycol mixtures at low temperatures of up to -45 °C, can also be used.

The magnetically coupled pump allows the user to optimally adjust pump capacity to suit the application, even over large distances and height differences, as well as for pressure-sensitive applications. Use of the latest thermodynamic technologies means that the cooling capacity is automatically adjusted to the current power requirements. Combined with further optimizations, the PRESTO W58x is both incredibly economical and energy-efficient.

To reduce evaporation from shake flasks or microtitre plates a stainless steel water bath can be placed inside the incubator. This water bath is not fitted with an automatic water supply and must be topped up manually.

Clamp U-1000 for Erlenmeyer flasks with 1000 ml vol.

Tray with fixed clamps E-4000 For two 4000 ml Erlenmeyer flasks

Storage tanks in black PP for storing pure water from reverse osmosis systems. Closed rectangular design, including 400 mm manhole with lid and tension ring as well as galvanised steel bandages.
• Volume (l): 3000
• Size (L x W x H (mm): 2230x995x1650
• Net weight (kg): 165
• Input connection: R ¾''
• Drain connection: R 1¼''"

Up to 10 bar pressure-resistant, stainless steel, empty cartridge for ion exchange resin.
• Material: stainless steel – AISI 316
• Dimensions mm (Ø x height): 363 x 850
• Connection: R ¾ "

• Tmax 1100 °C
• Dimensions 310 x 490 x 20 mm
• For models L 40, LT 40