All products


% Ohaus Rotor Angle 4x500ml ID Frontier rotors extend the functionality of Frontier centrifuges by increasing the number of tubes of varied types and sizes that can be used in conjunction with each of the centrifuge models. Easy to clean and operate, the rotors are durably constructed to withstand demanding centrifugation. Compatible adapters and other accessories: • Adapter 1x250ml D60.5mm FA x2 (30559416)); Adapter 1x175/225 ml D61.5mm FA x2 (30559417); Adapter 1x50ml D29.5mm FA x2 (30559419); Adapter 3x50ml D29mm RB x2 (30559420); Adapter 4x30ml D25.5mm RB x2 (30559421); Adapter 6x15ml D17mm FA x2 (30559422); Adapter 1x250ml D61.5mm FB x2 (30564850)	% Nabertherm LT 24/11/B510 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type N (1100 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With lift door (LT) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation B510 (5 programs with each 4 segments) • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door	% Ohaus Rotor Angle 45° 24x1.5/2.0ml ID BIOSEALS Frontier rotors extend the functionality of Frontier centrifuges by increasing the number of tubes of varied types and sizes that can be used in conjunction with each of the centrifuge models. Easy to clean and operate, the rotors are durably constructed to withstand demanding centrifugation. Compatible adapters and other accessories: • Adapter, D6mm, 0.2/0.4ml Tubes x6 (30130884); Adapter, D8mm, 0.5ml Tubes x6 (30130885)	% Kühner Tray with fixed clamps F-50 Tray with fixed clamps F-50 To load 100 Erlenmeyer flasks with a volume of 50 ml
% Nabertherm LT 24/11/C550 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type N (1100 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With lift door (LT) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation C550 • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door	% Kühner Tray with fixed clamps F-100 Tray with fixed clamps F-100 To load 74 Erlenmeyer flasks with a volume of 100 ml	% Ohaus Rotor Angle 24x1.5/2.0ml BIOSEALS V2 Frontier rotors extend the functionality of Frontier centrifuges by increasing the number of tubes of varied types and sizes that can be used in conjunction with each of the centrifuge models. Easy to clean and operate, the rotors are durably constructed to withstand demanding centrifugation. Compatible adapters and other accessories: • Adapter, D6mm, 0.2/0.4ml Tubes x6 (30130884); Adapter, D8mm, 0.5ml Tubes x6 (30130885)	% Nabertherm LT 24/12/B510 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type S (1200 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With lift door (LT) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation B510 (5 programs with each 4 segments) • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door
% Kühner Tray with fixed clamps F-125 Tray with fixed clamps F-125 To load 60 Erlenmeyer flasks with a volume of 125 ml	% Nabertherm LT 24/12/C550 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type S (1200 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With lift door (LT) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation C550 • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door	% Kühner Tray with fixed clamps F-150 Tray with fixed clamps F-150 To load 60 Erlenmeyer flasks with a volume of 150 ml	% Nabertherm L 24/11/B510 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type N (1100 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With flap door (L) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation B510 (5 programs with each 4 segments) • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door
% Kühner Tray with fixed clamps F-200 Tray with fixed clamps F-200 To load 40 Erlenmeyer flasks with a volume of 200 ml	% Nabertherm L 24/11/C550 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type N (1100 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With flap door (L) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation C550 • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door	% Kühner Tray with fixed clamps F-250 Tray with fixed clamps F-250 To load 40 Erlenmeyer flasks with a volume of 250 ml	% Nabertherm L 24/12/B510 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type S (1200 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With flap door (L) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation B510 (5 programs with each 4 segments) • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door
% Kühner Tray with fixed clamps F-300 Tray with fixed clamps F-300 To load 30 Erlenmeyer flasks with a volume of 300 ml	% Nabertherm L 24/12/C550 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type S (1200 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With flap door (L) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation C550 • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door	% Kühner Tray with fixed clamps F-500 Tray with fixed clamps F-500 To load 26 Erlenmeyer flasks with a volume of 500 ml	% Nabertherm LT 40/11/B510 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type N (1100 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With lift door (LT) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation B510 (5 programs with each 4 segments) • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door