Other accessories


% Miele XKM RS 232 10 Med communication module Communication modulewith serial interface (RS232) for connection to a printer. • Ring memory for max. 25 process reports • Difference between short and long report • Transfer speed: max. 38 kBit/s • Length of supply lead: 1.5 m; extension up to 15 m possible Machine affiliation: Can be used for PG 8583, PG 8583 CD, PG 8593 devices.	% Miele XKM 3000LMed communication module Communication module with Ethernet interface for connecting to a network. • Ring memory for up to 30 process and 2 graphic protocols • No other component is required for direct/network connection • DHCP support for automatic setting of network parameters • Transmission speed 10/100 Mbit/s • Length of the connection cable: 1.5 m; extendable (The connector required for cable extension is included.) Machine affiliation: Can be used for PG 8583, PG 8583 CD, PG 8593 devices.	% Miele APH 591 paper roll Paper roll for protocol printer APH 500 PRT100 and APH 510 PRT110 • 5 paper rolls per pack • Width: 76 mm	% Miele APH 590 ink cartridge Ink cartridge for PRT 100 report printer.
% Miele APH 302 connection cable type 2 For connection of a machine with serial interface to a PC. • Null modem cable, length 3 m Machine affiliation: Can be used in PG 8583, PG 8583 CD, PG 8593 devices.	% Miele APH 301 connection cable type 1 For connection of a machine with serial interface to a PC. • Compat. w. Miele PWD853x, PLW611x, PG858x/9x w. XKM RS232 10 Med • Crossover cable, length 3 m Machine affiliation: Can be used in PG 8583, PG 8583 CD, PG 8593 devices.	% Miele APH 530 connection cable for interruption-free connection to the printer • Compatible with APH 510 PRT110 report printer • Length: 10 m	% Miele APH510 PRT110 Protocol printer Protocol printer for printing process protocols • Dotmatrix printer with ink ribbon • Colour: Black • Compatible with all Miele cleaning/disinfecting devices (Except PG 852x, PG 853x and PG 89xx.brThe XKM RS232 10 Med serial communication module is also required for the Miele PG 858x and PG 859x cleaning and disinfecting devices.)
% Miele E 336 irrigation sleeves For the optimum loading of pipettes/MIS instruments in injector units. • Pipettes up to max. 445 mm length can be held • Plastic, screw connection	% Miele A 862 holder rack 4x8 Holder rack for the optimum positioning of laboratory glassware for injector modules A 302/2 and A 302/3 • Area of application: reprocessing laboratory glassware • The holder rack clicks into place on the injector module. The holder rack enables laboratory glassware to be positioned ideally for the best possible cleaning results. The glassware is also protected against damage. • Arrangement: 4 x 8 fields • Plastic-coated For use on A 302/2 and A 302/3 injector modules.	% Miele A 861 holder rack 3x6 fields Holder rack for the optimum positioning of laboratory glassware for injector modules A 301/4 and A 301/5. • Area of application: reprocessing laboratory glassware • The holder rack clicks into place on the injector module. The holder rack enables laboratory glassware to be positioned ideally for the best possible cleaning results. The glassware is also protected against damage. • Arrangement: 3 x 6 fields • Part of the EasyLoad system. The EasyLoad system makes reprocessing laboratory glassware considerably faster, simpler and more reliable. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as height adjustment of the holders is no longer necessary thanks to the smart combination of nozzles and holding frames. This makes correct positioning extremely easy. For use on A 301/4 and A 301/5 injector modules.	% Miele A 860 holder rack 2x4 fields Holder rack for the optimum positioning of laboratory glassware for injector modules A 300/2 and A 300/3. • Area of application: reprocessing laboratory glassware • The holder rack clicks into place on the injector module. The holder rack enables laboratory glassware to be positioned ideally for the best possible cleaning results. The glassware is also protected against damage. • Arrangement: 2 x 4 fields • Part of the EasyLoad system. The EasyLoad system makes reprocessing laboratory glassware considerably faster, simpler and more reliable. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as height adjustment of the holders is no longer necessary thanks to the smart combination of nozzles and holding frames. This makes correct positioning extremely easy. Machine affiliation: Can be used in PG 8504, PG 8583, PG 8583 CD, PG 8593 devices. For use on A 300/2 and A 300/3 injector modules.
% Miele A 14/1 lid For securing delicate load items. • Area of application: reprocessing laboratory glassware • Lid in stainless steel • 7 x 7 mm perforations, 3 mm slat	% Miele A 12/1 insert 1/2 For the gentle cleaning of delicate items by interrupting the spray jet. • Area of application: reprocessing laboratory glassware • With perforations 7 x 7 mm • For use in upper and lower basket • External dimensions: net dept 429 mm, net width 224 mm Machine affiliation: Can be used in PG 8583, PG 8583 CD, PG 8593 devices.	% Miele A 11/1 insert 1/1 For the gentle cleaning of delicate items by interrupting the spray jet. • Area of application: reprocessing laboratory glassware • With perforations 7 x 7 mm • For use in upper and lower basket Machine affiliation: Can be used in PG 8583, PG 8583 CD, PG 8593 devices.	% Miele A 3 cover net 1/4 As cover for wash items in inserts. • Area of application: reprocessing laboratory glassware • Plastic coated metal frame with plastic netting • Suitable for 1/4 inserts • 206 x 206 mm
% Miele A 2 cover net 1/2 For fixing delicate wash items. • Area of application: reprocessing laboratory glassware • Suitable for 1/2 inserts • Plastic coated metal frame with plastic netting • Size: 216 x 456 mm	% Miele E 362 blind stopper For the sealing of fittings to load carriers. • Area of application: reprocessing laboratory glassware • Thread M8 x 1	% Miele E 354 clamps for nozzle 6,0x220 mm Height-adjustable for optimum positioning of laboratory glassware on the nozzle. • Area of application: reprocessing laboratory glassware • Height adjustable locking • Suitable for bottles, Erlenmeyer flasks and round bottomed flasks for example • Suitable for injector nozzle E 352 Machine affiliation: Can be used in PG 8504, PG 8583, PG 8583 CD, PG 8593 devices, for E 352 injector nozzles.	% Miele E 353 clamps for nozzle 4,0x160mm Height-adjustable for optimum positioning of laboratory glassware on the nozzle. • Area of application: reprocessing laboratory glassware • Height adjustable locking • Suitable for bottles, Erlenmeyer flasks and round bottomed flasks for example • Suitable for injector nozzle E 351 Machine affiliation: Can be used in PG 8504, PG 8583, PG 8583 CD, PG 8593 devices, for E 351 injector nozzles.