Accessories for MIELE PLW 7111 SlimLine laboratory washer


% Miele APLW 215 modul Basket for optimum loading of injector modules or inserts • For use on level 1 • Equipped with a special injector nozzle • Equipped with a holding frame	% Miele APLW 152 basket • For use on level 1 • Vertical clearance dependent on other baskets used • Clearances: width 507 mm, depth 545 mm	% Miele APLW 107 basket • Height adjustable for optimum loading of inserts • For use on levels 2 to 4 • Open front • With integrated spray arm • Clearances dependent on which baskets are used and their position	% Miele APLW 106 basket For optimum loading of injector modules or inserts • For use on levels 1 to 4 • Basket with two docking connections • For loading up to 2 injector modules or inserts • Automatic closing of the connections when not in use • Clearances dependent on which baskets are used and their position
% Miele APLW 044 insert Separation net for dividing the footprint in the APLW 042. • Area of application: reprocessing laboratory glassware	% Miele APLW 043 lid Lid for APLW 040–042 inserts • Area of application: reprocessing laboratory glassware	% Miele APLW 042 insert Insert for optimum loading of test tubes, height 200 mm. • Area of application: reprocessing laboratory glassware • For use with APLW 043 lid	% Miele APLW 041 insert Insert for optimum loading of test tubes, height 130 mm. • Area of application: reprocessing laboratory glassware • For use with APLW 043 lid
% Miele APLW 040 insert Insert for optimum loading of test tubes, height 100 mm. • Area of application: reprocessing laboratory glassware • For use with APLW 043 lid	% Miele APLW 039 insert Insert for optimum loading of half petri dishes. • Area of application: reprocessing laboratory glassware • Suitable for 26 half petri dishes • Spacing between the holders 24 mm	% Miele APLW 038 insert Insert for the optimum loading of wide-necked Erlenmeyer flasks & measuring cylinders. • Area of application: reprocessing laboratory glassware • Equipped with 14 spring hooks, 175 mm & 14 105 mm height	% Miele E 336 irrigation sleeves For the optimum loading of pipettes/MIS instruments in injector units. • Pipettes up to max. 445 mm length can be held • Plastic, screw connection
% Miele A 862 holder rack 4x8 Holder rack for the optimum positioning of laboratory glassware for injector modules A 302/2 and A 302/3 • Area of application: reprocessing laboratory glassware • The holder rack clicks into place on the injector module. The holder rack enables laboratory glassware to be positioned ideally for the best possible cleaning results. The glassware is also protected against damage. • Arrangement: 4 x 8 fields • Plastic-coated For use on A 302/2 and A 302/3 injector modules.	% Miele A 861 holder rack 3x6 fields Holder rack for the optimum positioning of laboratory glassware for injector modules A 301/4 and A 301/5. • Area of application: reprocessing laboratory glassware • The holder rack clicks into place on the injector module. The holder rack enables laboratory glassware to be positioned ideally for the best possible cleaning results. The glassware is also protected against damage. • Arrangement: 3 x 6 fields • Part of the EasyLoad system. The EasyLoad system makes reprocessing laboratory glassware considerably faster, simpler and more reliable. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as height adjustment of the holders is no longer necessary thanks to the smart combination of nozzles and holding frames. This makes correct positioning extremely easy. For use on A 301/4 and A 301/5 injector modules.	% Miele A 860 holder rack 2x4 fields Holder rack for the optimum positioning of laboratory glassware for injector modules A 300/2 and A 300/3. • Area of application: reprocessing laboratory glassware • The holder rack clicks into place on the injector module. The holder rack enables laboratory glassware to be positioned ideally for the best possible cleaning results. The glassware is also protected against damage. • Arrangement: 2 x 4 fields • Part of the EasyLoad system. The EasyLoad system makes reprocessing laboratory glassware considerably faster, simpler and more reliable. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as height adjustment of the holders is no longer necessary thanks to the smart combination of nozzles and holding frames. This makes correct positioning extremely easy. Machine affiliation: Can be used in PG 8504, PG 8583, PG 8583 CD, PG 8593 devices. For use on A 300/2 and A 300/3 injector modules.	% Miele A 14/1 lid For securing delicate load items. • Area of application: reprocessing laboratory glassware • Lid in stainless steel • 7 x 7 mm perforations, 3 mm slat
% Miele A 3 cover net 1/4 As cover for wash items in inserts. • Area of application: reprocessing laboratory glassware • Plastic coated metal frame with plastic netting • Suitable for 1/4 inserts • 206 x 206 mm	% Miele A 2 cover net 1/2 For fixing delicate wash items. • Area of application: reprocessing laboratory glassware • Suitable for 1/2 inserts • Plastic coated metal frame with plastic netting • Size: 216 x 456 mm	% Miele E 362 blind stopper For the sealing of fittings to load carriers. • Area of application: reprocessing laboratory glassware • Thread M8 x 1	% Miele A 848 injector nozzle With support, for cleaning measuring cylinders. • Area of application: reprocessing pipettes/vials and laboratory glassware • Nozzle length: 350 mm • Nozzle Ø: 10 mm • Support Ø: 142 mm Can be used for A 313 and A 612 modules.