All products

The new generation
• Full convenience in use and display for all bath types
• Easy to operate - self-explanatory symbols well recognizable parameters, target as well as actual values - brightly lighting LED-display
• 4-step-operation as "plug and clean"
• Adjustable temperature range: 20-80 °C, with LED-display for target value and actual value of temperature
• Optical signal in case of excess temperature
• Timer for countdown and continuous operation
• DEGAS: adjustable pulse sound level for removing unwanted air bubbles, visible at LCD-display
• Automatic short-time ultrasound during heating
• Up period to avoid delay in boiling - switch-off possible
• Medical device class I
• Quality management system according to the requirements of EN ISO 13485
• protection class IP 33 at highest possible level through liquid-tight mains cable and housing Front without openings.
• SweepTec for permanent sound field oscillation ensures even and gentle cleaning
• Automatical safety shut-down 12 hours after last keypress
• Marking of filling level for safe dosage
• One-piece welded drain bow
• Transducers with high efficiency

The BINDER MK 720 CO₂ climate chamber is an ideal solution for all applications where fast and precise temperature changes are required, with large sample volumes. The unit provides stable and reproducible conditions within a temperature range of -40 °C to +180 °C, making it perfectly suitable for cyclic temperature testing, material testing, as well as research and development and quality assurance processes.

The equipment combines reliability, safety, and modern digital functionality. The robust design and long-lasting components ensure stable operation, while the intuitive touchscreen control and advanced programming capabilities enable simple and efficient use.

Why choose this model?

• Reliable protection for samples, data, and processes
• Stable, long-term operation in industrial and laboratory environments
• Intuitive touchscreen control and advanced programmability
• Energy-efficient and environmentally friendly CO₂ (R-744) cooling technology
• Optimized design for high-capacity testing

Key features and technological solutions

The MK 720 CO₂ model ensures precise and reliable testing conditions with advanced technologies. The APT.line™ preheating chamber technology guarantees uniform temperature distribution, even during intensive temperature changes, while the dynamic heating and cooling performance enables fast test cycles.

Thanks to digital control, time-segment and real-time programs can be set, while the integrated data logger ensures easy data handling and documentation. Data can be exported via USB and integrated into existing systems via Ethernet connection.

Main product features

• Temperature range: -40 °C to +180 °C
• Dynamic heating and cooling performance
• APT.line™ technology for uniform temperature distribution
• Integrated data logger with USB data export
• Ethernet and USB interfaces
• Stainless steel interior
• Heated viewing window with LED interior lighting
• Condensation protection and heated door
• Programmable ramp function for complex test cycles
• Visual and acoustic alarm system
• Independent temperature safety device (DIN 12880)

Areas of application

• Testing of electronic and automotive components
• Material testing under extreme temperature conditions
• Rapid temperature cycling tests
• Research and development projects
• Quality assurance processes

Flexible expandability

The MK 720 CO₂ climate chamber can be customized with various accessories and software solutions, allowing it to be precisely adapted to specific testing requirements. Available options include advanced data management software, various accessories, and validation services that support operation in regulated environments.
This model is an ideal choice for those looking for a high-capacity, reliable, and precise climate chamber with modern technology and sustainable operation.

VALEGRO recirculating coolers with additional heating function have an extended working temperature range from -20 to +85 °C. The pump can be easily adjusted in user-friendly, percentage-based stages.

Whether in the laboratory, research, or production, the VALEGRO 801H recirculating coolers offer a constant cooling capacity of 0.8 kW at 20 °C, supporting stable processes around the clock. These modern units offer precise temperature control for a wide range of applications and, thanks to their compact design, fit seamlessly into any working environment. The refrigeration circuit uses an eco-friendly, natural refrigerant.

When designing the VALEGRO recirculating coolers, the focus was on maximum user-friendliness. Many helpful features such as a timer function, a removable venting grid that does not require tools, and an illuminated and simple to clean level indicator make daily work easier. The inclined OLED touch display is easy to read and ergonomic to use. The intuitive menu navigation allows quick access to all functions. Warning notices and system messages are displayed in clear, understandable language, ensuring maximum safety when using the device.

In addition to RS232 and USB-C interfaces, VALEGRO recirculating coolers are also available with Ethernet (optional). All interfaces are located directly below the display and are easy to use from the front.

FOB4 – STAND-ALONE LAB STERILIZER
HIGH FLEXIBILITY. PROCESS OPTIMIZATION.
Applications: Food, Bio-pharmaceutical, Cosmetics, Microbiology, Packaging
Loads: Canned food, Sealed & unsealed containers, Large volume parenterals, Machine parts, Blood bags, Syringes, Tools, Wrapped tools, Culture media, Garments, Glassware
Processes: Sterilization
Useful chamber capacity: 210 liter
The FOB4 Stand-alone Lab Sterilizer is an autoclave that combines excellent performances with overall high quality materials and ease of use.
The FOB4 Lab Sterilizer is suitable for the use in laboratory for many different applications, such as:
• Microbiology and analytical labs.
• Research institutes and examination agencies.
• Bio-Technologies and life sciences.
• Animal facility and clinical diagnostic labs.
• Pharmaceutical, food, chemistry industries, QC labs.
• Agricultural, environmental and veterinary labs.
These sterilizers have been specially designed with ergonomical features for easy handling of higher volume sterilization materials and goods as: glassware, media preparation, liquids, in open and sealed containers, mixed regular and high risk waste, as well as surgery instruments, textiles, rubber articles and packaged tools.
FOB4 Stand-alone Lab Sterilizer is easy to be configured, thanks to its conceptual design and modular construction with a convenient portfolio of optional kits. In fact, all the models can be configured using various customized systems guaranteed by the wide range of processes, software options and an extensive choice of accessories. Please, click on the link “recommended kit” to check out all possible configurations referred to FOB4 series.
DESIGN AND TECHNICAL FEATURES
FOB4 can be designed in two chamber dimensions: 147 liters (FOB4-TS) with single vertical sliding door or 210 liters (FOB4S-TS – FOB4/L TS) with double vertical sliding door for pass-through purposes. The vertically automatic sliding doors are pneumatically activated for space efficiency in laboratory and hospitals.
FOB4 autoclave has internal 316L stainless steel plates fed by steam used both as heat-exchanger system for steam pre-heating and to cool the chamber temperature by means of cold softened water. As an option these plates can be used for drying purposes at the end of the cycle.
Fedegari designs laboratory autoclaves combining operators’ safety as well as equipment performances. Thermal blocking system to prevent door openings in hazardous situations. Temperature probes and pressure transducers ensure constant process monitoring, as well as precision and optimal temperature distribution in the chamber, guaranteeing a high level of safety for the operator and performance and reproducibility of the sterilization process.
FOB series is equipped with DCS20 process controller: 30 cycles easy to customize in a multi-user environment. Large touch-screen color display and interface for remote monitoring via Ethernet control. DCS20 process controller is fully validated and documented.
KEY BENEFITS
• Energy and water cost-saving.
• Small foot print with superior loading capacity.
• Ergonomic positioning of adjustable operator display.
• Full and easy accessibility to technical area from front and lateral sides.
• Special test programs for routine check of sterilizer efficiency.
• GAMP5 compliant.
• GLP compliant.
• Reduced process time.
• Flexible process machine
COMPLIANCE TO
PED Directive 2014/68/UE – Pressure equipment
Machine Directive Macchine 2006/42/EC
EMC Directive 2014/35/UE
LVD Directive 2006/95/UE

The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability.

Standard Equipment
• Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity
• Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C
• Thermocouple type N (1100 °C)
• Ceramic heating plates with integral heating element which is safeguarded and easy to replace
• With flap door (L)
• Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
• Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
• Adjustable air inlet integrated in door (see illustration)
• Exhaust air outlet in rear wall of furnace
• Controller with touch operation B510 (5 programs with each 4 segments)
• Solid state relays provide for lownoise operation

Option
• Chimney, chimney with fan or catalytic converter (not for L 1 and L 15)
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight
• Manual or automatic gas supply system
• Port for thermocouple in the rear wall or in the furnace door

The powerful virtuoso in cooling incubators for microorganisms: KB units are able to incubate with exceptional precision even when fully loaded, feature a hot-air disinfection routine, and can be programmed for weekend operation with ease. The new KB unit consumes as much as 40% less energy than the previous model.

IMPORTANT FEATURES

• Temperature range: 0°C to +70°C
• Proven APT.line™ preheating chamber technology
• Up to 40% lower energy consumption compared to the previous model
• Energy-efficient cooling with modern inverter cooling unit
• Cooling with climate-neutral R-600a refrigerant
• Door heating to prevent condensation
• Housing design with HIT technology
• Interior made completely of stainless steel
• Inner doors made of metal oxide-coated safety glass
• Two racks made of stainless steel
• Large access port with silicone plug
• Floor-standing units featuring robust twin casters with brakes at the front
• Stackable tabletop units with a volume of up to 130 liters
• Simple programming of a second set temperature value
• Internal data logger, measured values can be read out in open format via USB
• Class 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarms
• Unit self-test for comprehensive status analysis
• Data interfaces: Ethernet, USB

The most powerful, single-stage, highly dynamic temperature control systems

The water-cooled PRESTO W58x is able to quickly and efficiently control the temperature in applications requiring a great deal of power. This model features has an impressive cooling capacity of 33 kW at 20°C, thus ensuring that it maintains large power reserves over its entire working temperature range, especially at temperatures around -30°C to -40°C, which are often necessary for automotive testing.

The PRESTO W58x process system is equipped with a gear pump. As a result, bath fluids with a high viscosity, such as water-glycol mixtures at low temperatures of up to -45 °C, can also be used.

The magnetically coupled pump allows the user to optimally adjust pump capacity to suit the application, even over large distances and height differences, as well as for pressure-sensitive applications. Use of the latest thermodynamic technologies means that the cooling capacity is automatically adjusted to the current power requirements. Combined with further optimizations, the PRESTO W58x is both incredibly economical and energy-efficient.

To reduce evaporation from shake flasks or microtitre plates a stainless steel water bath can be placed inside the incubator. This water bath is not fitted with an automatic water supply and must be topped up manually.

Clamp U-1000 for Erlenmeyer flasks with 1000 ml vol.

Tray with fixed clamps E-4000 For two 4000 ml Erlenmeyer flasks

• Accepts 12 cassettes small
• 8 rollers minimizing pulsation

Storage tanks in black PP for storing pure water from reverse osmosis systems. Closed rectangular design, including 400 mm manhole with lid and tension ring as well as galvanised steel bandages.
• Volume (l): 3000
• Size (L x W x H (mm): 2230x995x1650
• Net weight (kg): 165
• Input connection: R ¾''
• Drain connection: R 1¼''"

• Tmax 1100 °C
• Dimensions 310 x 490 x 20 mm
• For models L 40, LT 40

Extra shelves are available and each shelf comes with 4 clips.

Frontier rotors extend the functionality of Frontier centrifuges by increasing the number of tubes of varied types and sizes that can be used in conjunction with each of the centrifuge models. Easy to clean and operate, the rotors are durably constructed to withstand demanding centrifugation.

Compatible adapters and other accessories:
• Adapter, 1x15ml D17mm FA, 2/pk (30314897); Adapter, 1x15ml D17mm RB, 2/pk (30314893); Adapter, 1x16ml D18mm RB, 2/pk (30314899); Adapter, 1x30ml D25mm RB, 2/pk (30314894); Adapter, 1x50ml D29mm FA, 2/pk (30314896); Adapter, 1x50ml D29mm RB, 2/pk, V2 (30314895); Adapter, 2x15ml D17mm RB, 2/pk (30314898)

This chemistry vacuum system provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. It is therefore ideal for evacuating and pumping large amounts of gases and vapors. It has a wide range of applications in chemical, biological and pharmaceutical laboratories if condensation of solvent vapors at the outlet is not necessary. Typical applications are vacuum ovens, single and multiple filtrations, as well as concentration of solvents with low boiling points. The separator at the inlet (AK) is made of glass with protective coating and retains particles and liquid droplets. The separator at the outlet collects condensate, avoids condensate backflow towards the pump and makes the pump whisper-quiet.

Performance features
• outstanding chemical resistance and superior vapor tolerance
• high performance even at low vacuum levels
• compact design
• whisper quiet and very low vibration
• separators at inlet and outlet to collect condensates

Optimum level of comfort for the storage of flammable chemicals with 90 minutes of fire protection
• Interior fittings: 2x 4 Storage shelves and 2x1 bottom trays made of powder-coated sheet steel
• Wing doors, powder-coated sheet steel
• Outer carcass, powder-coated sheet steel
• Inner carcass made of high-quality decor panels
Colour standard version:
• Wing doors in zinc yellow RAL 1018
• Carcass completely in light grey RAL 7035
• Base in slate grey RAL 7015
Available Models:
• with classical wing door technology (doors can be opened with minimum effort)
• with one-hand wing door technology (doors can be opened with minimum effort)
Technical data
• Cabinet: safety storage cabinet
• Interior: bottom traystorage shelves
• Fire resistance: 90 min
• Doors, drawers: wing doors

The new generation
• Full convenience in use and display for all bath types
• Easy to operate - self-explanatory symbols well recognizable parameters, target as well as actual values - brightly lighting LED-display
• 4-step-operation as "plug and clean"
• Adjustable temperature range: 20-80 °C, with LED-display for target value and actual value of temperature
• Optical signal in case of excess temperature
• Timer for countdown and continuous operation
• DEGAS: adjustable pulse sound level for removing unwanted air bubbles, visible at LCD-display
• Automatic short-time ultrasound during heating
• Up period to avoid delay in boiling - switch-off possible
• Medical device class I
• Quality management system according to the requirements of EN ISO 13485
• protection class IP 33 at highest possible level through liquid-tight mains cable and housing Front without openings.
• SweepTec for permanent sound field oscillation ensures even and gentle cleaning
• Automatical safety shut-down 12 hours after last keypress
• Marking of filling level for safe dosage
• One-piece welded drain bow
• Transducers with high efficiency

The Pioneer PX combines essential weighing functionality with competitive performance, offering high accuracy and repeatability for applications in laboratory, industrial and education settings. The PX is affordably priced, and intuitively designed for intelligent operation with a second line display for additional information, and USB and RS232 connectivity for easy communication.
• Applications
Basic Weighing, Parts Counting, Percent Weighing, Animal Weighing, Density Determination
• Display
Backlit Liquid Crystal Display (LCD); Second line display for additional information or guidance (dot matrix)
• Operation
AC adapter (included)
• Communication
RS232 and USB device (included); GLP/GMP data output with real-time clock
• Construction
Metal base, plastic top housing, removable stainless steel pan, glass draftshield, integrated weigh-below-hook, security bracket, calibration lock and in-use cover
• Design Features
User-selectable environmental filters and brightness settings, auto-tare, auto-dim, user-selectable span calibration points, software lockout and reset menu, userselectable communication settings and data print options, user-definable project and user IDs, software overload/underload indicator, stability indicator, four operating languages

The BANDELIN SONOREX smart ST 255 H ultrasonic bath is a high-performance, heated device designed for laboratory, healthcare, and industrial ultrasonic applications. The intense cavitation generated by ultrasound ensures thorough and uniform cleaning even on hard-to-reach surfaces, while remaining gentle on sensitive instruments.

The intuitive touchscreen control allows precise adjustment and continuous monitoring of ultrasonic power, operating time, and temperature. The integrated program memory enables reproducible cleaning processes. SweepTec technology provides a uniform ultrasonic field, while the Degas function increases cleaning efficiency through rapid degassing of the liquid.

Product features

• Ultrasonic cleaning with intensive cavitation
• Touchscreen control for easy parameter adjustment and monitoring
• Adjustable ultrasonic power (10–100%)
• Integrated heating, adjustable temperature range: 20–80 °C
• SweepTec technology for uniform ultrasonic distribution
• Degas function for rapid degassing of the cleaning liquid
• Program memory for reproducible operating processes
• Timer adjustable from 1 second to 8 hours
• Stainless steel ultrasonic tank and housing
• Side drain valve for easy liquid exchange
• IP32 protection rating