All products

The BINDER MKFT series environmental simulation chamber for low temperature alternating climate profiles is the specialist for dynamic alternating climate change between -70 °C and 180 °C. Large performance reserves and rapid cooling make the MKFT environmental simulation chamber the high-end product for complex standards-based climate tests.
Benefits
• Homogeneous climate conditions thanks to APT.line™ technology
• Automatic water and wastewater management
• Pressure humidification with fast response times
• Comprehensive programming and data acquisition
• Large heated viewing window
Important characteristics
• Temperature range: -70 °C to +180 °C
• Humidity range: 10 % to 98 % RH
• Integrated water-storage tank, 20 liters
• 4 zero-voltage relay contacts
• APT.line™ preheating chamber technology
• Programmable condensation protection for test material
• Intuitive touchscreen controller with time-segment and real-time programming
• Internal data logger, measured values can be read out in open format via USB
• Heated viewing window with LED interior lighting
• Humidity regulation with capacitative humidity sensor and vapor humidification
• BINDER Multi Management Software APT-COM™ Basic Edition
• Troubleshooting system with visual and audible alarms
• Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
• Access port with silicone plug (Models 115, 240: 50 mm, left)
• 2 access ports with silicone plugs (Model 720: 80 mm, left and right)
• 4 castors, two with brakes
• Computer interface: Ethernet
• 230 V power socket on the right-side control panel
• Adjustable ramp function
• Integrated chart recorder
• Real-time clock
• Door heating
• Alarm notification in the event of insufficient water in fresh water tank
• 1 stainless steel rack
• Complete safety connection kit for water supply and drainage, up to 1 m in height
• Inner chamber made of stainless steel
• CFC-free refrigerants R-452A and R-23
• Cooling with cascade compressor cooling unit

In addition to the advantages of the CORIO C Circulator, the CORIO CD and CP
Immersion Circulator can be equipped with an optional pump set for
temperature control of external applications.

Your advantages

• Models for internal and external applications
• Bright, white, easy to read display
• Very quiet
• Easy switching between internal and external circulation
• Powerful and infinitely adjustable pressure pump
• USB connection
• RS232 interface for online communication
• High-quality bath tanks made of stainless steel with bath lid and drain tap
• Integrated pump connection M16×1
• Integrated cooling coil for counter-cooling
• Precise temperature control
• Easy pump change-over between internal and external circulatio

The MAZERUSTAR KK-V350WE is a vacuum planetary centrifugal mixer developed for simultaneous mixing and high-efficiency deaeration of high-viscosity materials. Thanks to its vacuum technology, the system efficiently removes entrapped air bubbles while providing homogeneous and reproducible mixing results.

Its independently controlled revolution and rotation movement enables precise processing of materials with different viscosities and specific gravities without the use of mixing blades. The contactless technology helps maintain material integrity and reduces contamination risk.

The KK-V350WE is particularly suitable for electronics, pharmaceutical, chemical, and advanced material applications where bubble-free and homogeneous material processing is essential.

Key Features

• Simultaneous mixing and vacuum deaeration
• Planetary centrifugal mixing technology
• Vacuum chamber design
• Contactless processing without mixing blades
• Suitable for high-viscosity materials
• Homogeneous mixing and efficient bubble removal
• Adjustable revolution and rotation settings
• User-programmable operating conditions
• Compact laboratory design
• CE-marked model

Typical Applications

• Electronic materials
• Adhesives and resins
• Conductive and ceramic pastes
• Pharmaceutical and medical materials
• Cosmetics and specialty chemicals
• Special industrial and research materials

Main Specifications

• Maximum processing capacity: approx. 350 g × 2 containers
• Standard container: HDPE container
• Vacuum operation
• Adjustable mixing speed
• Power consumption: approx. 1.2 kW
• Dimensions (W × D × H): approx. 500 × 650 × 650 mm
• Weight: approx. 95 kg
• Compact benchtop design
• High reproducibility and process stability

The HD 5100 optimally sonicates sample volumes of 2-200 ml at 20 kHz and sonotrodes with a diameter of 2-13 mm. The generator provides up to 100 W of power.

Homogenisers with amplitude control 10 to 100 % and actual value display, pulsation, AMPLICHRON® circuit (guarantees constant amplitude independent of changing conditions), integrated timer, remote control.
Areas of application
• Disruption of cells, bacteria, viruses, tissue (cell disruption)
• Production of finest emulsions
• Homogenising substances
• Degassing of liquids
• Sample preparation for particle size analysis
• Acceleration of chemical reactions

Properties
• More functionality
• For volumes from 2-200 ml
• Flexible application possibilities
• Large display
• Programme memory

Bethe ready-to-use set:
for volumes 2-200 ml
Ultrasonic nominal power max. 100 W
- Ultrasonic generator GM 5200
- Ultrasonic transducer UW 5100
- Step horn SH 100 G
- Sonotrode TS 103, Ø 3 mm
(for volumes 3-50 ml)
- incl. tool for mounting the probes

Technical data
• Sonication volume [ml]: 2-200
• Nominal ultrasonic power [W]: 100
• Ultrasonic frequency [kHz]: 20 ± 0,5
• Sonotrode diameter [mm]: 3
• Probe length [mm]: 147
• Time setting [min]: 9 h: 59 min: 59 s or continuous operation
• Pulsation times: Working intervals 0.5-600 s: Rest intervals 0.3-600 s
• Energy display: Ws
• Heat output [W]: 100

The BANDELIN SONOREX smart ST 170 H ultrasonic bath is a high-performance, heated device designed for laboratory, healthcare, and industrial ultrasonic applications. The intense cavitation generated by ultrasound ensures thorough and uniform cleaning even on hard-to-reach surfaces, while remaining gentle on sensitive instruments.

The intuitive touchscreen control allows precise adjustment and continuous monitoring of ultrasonic power, operating time, and temperature. The integrated program memory enables reproducible cleaning processes. SweepTec technology provides a uniform ultrasonic field, while the Degas function increases cleaning efficiency through rapid degassing of the liquid.

Product features

• Ultrasonic cleaning with intensive cavitation
• Touchscreen control for easy parameter adjustment and monitoring
• Adjustable ultrasonic power (10–100%)
• Integrated heating, adjustable temperature range: 20–80 °C
• SweepTec technology for uniform ultrasonic distribution
• Degas function for rapid degassing of the cleaning liquid
• Program memory for reproducible operating processes
• Timer adjustable from 1 second to 8 hours
• Stainless steel ultrasonic tank and housing
• Side drain valve for easy liquid exchange
• IP32 protection rating

For the optimum loading of up to 98 pipettes.
• Area of application: reprocessing pipettes/vials
• Suitable for 98 measuring and full pipettes, for example
• Height of holding frame 150 mm
• 1 unit can be inserted into each of the baskets A 150 and APLW 106
• Vertical clearance without upper basket: 450 mm (with A 150 lower basket)

Machine affiliation:
PLW 8636 [LAB / LAB MON]
PG 8583
PG 8583 CD
PG 8593
PLW 7111
PLW 8604
PLW 8683
PLW 8683 CD
PLW 8693

ISF1-Z incubator shaker - the perfect solution for shaken cultivation processes
The ISF1-Z incubator shaker is suitable for applications in laboratories, research centers and production facilities. The ISF1-Z complies with GMP (good manufacturing practice) requirements and regulations. It offers a large shaking capacity with a small footprint and many features allowing straightforward, safe handling of any culture or product. The incubator shaker is applicable for microbial, plant, human and animal cell cultures.
Performance characteristics of ISF1-Z models
• Large shaking capacity with small footprint
• Hygienic design according to DIN EN ISO 14159
• Improved direct drive: stronger, higher shaking frequencies, very long lasting
• Up to three machines can be stacked without additional components: incubators ISF1-X/W and new ISF1-Z mixable in stack
• Flexible and retrofittable: all options and accessories applicable
• Fast, direct information through parallel and clear display of all process parameters
ISF1-Z Models
• The ISF1-Z incubator shaker is available in three different models: ISF1-Z, ISF1-Z EcoDew and ISF1-Z Peltier. Each model provides distinct features and is additionally available with CO2 control for cell culture processes.
• The ISF1-Z is the basic version of Kuhners stackable incubator shaker with temperature control (heating).
100% stainless steel for easy cleaning
• The ISF1-Z is available in a 100% stainless steel finish. It can either be painted white or have a processed stainless steel look. Take a look at the video to see the advantages of having stainless steel inside and outside the shaker.
Quality
• The improved maintenance-free direct drive of the ISF1-Z is stronger, offers higher shaking frequencies and has a longer lifespan than ever. It guarantees accurate control and low energy consumption/heat dissipation even at high speeds. Kuhner’s direct drive system and the newly designed shaking table allows the shaking diameter to be changed at any time – quickly and easily. Different fixed shaking diameters (3, 6, 9, 12.5, 19, 25, 50, 70 mm) are adjustable. And even a stepless adjustment is available as an option.
• All ISF1-Z components are designed for durability and reliability. A Kuhner shaker is a cost effective investment in quality backed with a five year warranty.
Hygienic design
• The ISF1-Z is made of stainless steel inside and outside for easy and fast cleaning. The hygienic design complies with GMP requirements. The interior was designed according to DIN EN ISO 14159. It has rounded corners and a drain at the back for quick removal of any unwanted liquids. The direct drive system is completely covered and therefore protected from spills. The incubator chamber can be cleaned with chemicals or sterilized using optional UV lighting.
A system that grows with your needs
• Up to three ISF1-Z incubators can be stacked providing more shaking capacity without taking up more floor space in the lab. Stacking is a simple procedure without the need for special tools or stacking kits. Each machine operates independently. The ISF1-Z incubator shakers are mixable in stack with ISF1-X/W incubators.
Options, accessories, and more
• Numerous options and accessories are available for the ISF1-Z incubator shaker to fulfill any need of our customers regarding cultivations in shaken bioreactors. Moreover, all accessories are interchangeable between the new ISF1-Z incubators and its predecessors ISF1-X/W. The ISF1-Z offers even more interior space than its predecessor ISF1-X, e.g. to accommodate particularly big shake flasks. The ISF1-Z has clearly arranged displays on the front side (e.g. for shaking speed) with color change and an acoustic signal when an error/alarm occurs.
• Additionally, a fix or a tilting touchscreen version with our Kuhner Insight software is available. Serial interfaces (e.g. CAN) are arranged on the front side and the sensors in the inside are also easily accessible for a fast and comfortable work flow. The interior LED light is a color neutral light with low energy dissipation.
Detailed technical data can be found in the product catalog.

In addition to the advantages of the CORIO C Circulator, the CORIO CD and CP
Immersion Circulator can be equipped with an optional pump set for
temperature control of external applications.

Your advantages

• Models for internal and external applications
• Bright, white, easy to read display
• Very quiet
• Easy switching between internal and external circulation
• Powerful and infinitely adjustable pressure pump
• USB connection
• RS232 interface for online communication
• High-quality bath tanks made of stainless steel with bath lid and drain tap
• Integrated pump connection M16×1
• Integrated cooling coil for counter-cooling
• Precise temperature control
• Easy pump change-over between internal and external circulatio

The HD 5200 is ideal for gentle sonication of medium sample volumes in the range of 5-1000 ml at 20 kHz and with probes with a diameter of 3-25 mm and a power of up to 200W.

Homogenisers with amplitude control 10 to 100 % and actual value display, pulsation, AMPLICHRON® circuit (guarantees constant amplitude independent of changing conditions), integrated timer, remote control.
Areas of application
• Disruption of cells, bacteria, viruses, tissue (cell disruption)
• Production of finest emulsions
• Homogenising substances
• Degassing of liquids
• Sample preparation for particle size analysis
• Acceleration of chemical reactions

Properties
• More functionality
• For volumes from 5-1000 ml
• Flexible application possibilities
• Large display
• Programme memory

Ready-to-use set:
for volumes from 5 -1000 ml
Ultrasonic nominal power max. 200 W
- Ultrasonic generator GM 5200
- Ultrasonic transducer UW 5200
- Booster horn SH 200 G
- Sonotrode TT 213, Ø 13 mm
(for volumes 20-900 ml)
- incl. tool for mounting the probes

Technical data
• Sonication volume [ml]: 5-1000
• Nominal ultrasonic power [W]: 200
• Power setting: max. 200
• Ultrasonic frequency [kHz]: 20 ± 0,5
• Sonotrode diameter [mm]: 13
• Probe length [mm]: 130
• Time setting [min]: 9 h: 59 min: 59 s or continuous operation
• Pulsation times: Working intervals 0.5-600 s: Rest intervals 0.3-600 s
• Energy display: Ws
• Heat output [W]: 200

For the optimum loading of up to 98 vials.
• Area of application: reprocessing pipettes/vials
• Suitable for 98 centrifuge tubes, phials, test tubes, for example
• The loading heights differ depending on the positioning
Loading height:
Loading height in lower basket without upper basket 428 mm, in lower basket with upper basket 172 mm, in upper basket 172 mm.
• 1 unit can be inserted into each of the baskets A 100, A 150 and APLW 106

Machine affiliation:
PLW 8636 [LAB / LAB MON]
PG 8504
PG 8583
PG 8583 CD
PG 8593
PLW 7111
PLW 8604
PLW 8683
PLW 8683 CD
PLW 8693

ISF1-Z incubator shaker - the perfect solution for shaken cultivation processes
The ISF1-Z incubator shaker is suitable for applications in laboratories, research centers and production facilities. The ISF1-Z complies with GMP (good manufacturing practice) requirements and regulations. It offers a large shaking capacity with a small footprint and many features allowing straightforward, safe handling of any culture or product. The incubator shaker is applicable for microbial, plant, human and animal cell cultures.
Performance characteristics of ISF1-Z models:
• Large shaking capacity with small footprint
• Hygienic design according to DIN EN ISO 14159
• Improved direct drive: stronger, higher shaking frequencies, very long lasting
• Up to three machines can be stacked without additional components: incubators ISF1-X/W and new ISF1-Z mixable in stack
• Flexible and retrofittable: all options and accessories applicable
Includes all features of the basic model plus:
• Vast temperature range: from 3 to 80°C, it provides the user a greater flexibility in terms of low and high temperatures.
• Fast cooling and heating
• Low temperatures for storage and inoculum preparation
• Two cooling units with eco-friendly natural gas
• Humidifying and dehumidifying possible
Detailed technical data can be found in the product catalog.

Selection of the suitable SONOREX SUPER depends on the sizes and numbers of objects to be cleaned and of the sample vessels to be sonicated. Different sizes of ultrasonic baths are available for various applications.

Features

• PZT-large area oscillating systems
• HF-Frequency 35 kHz
• Timer 1 - 15 minutes and continuous operation
• H-types with built-in heating, 30 - 80 °C (86 to 176 °F) thermostatically adjustable, RK 31 H fixed at 65 °C/149 °F
• Housing of stainless steel - drip proof
• Drain cock included for easy emptying (from RK 100 SH upward )
• SONOREX SUPER units are CE marked

In addition to the advantages of the CORIO C Circulator, the CORIO CD and CP
Immersion Circulator can be equipped with an optional pump set for
temperature control of external applications.

Your advantages

• Models for internal and external applications
• Bright, white, easy to read display
• Very quiet
• Easy switching between internal and external circulation
• Powerful and infinitely adjustable pressure pump
• USB connection
• RS232 interface for online communication
• High-quality bath tanks made of stainless steel with bath lid and drain tap
• Integrated pump connection M16×1
• Integrated cooling coil for counter-cooling
• Precise temperature control
• Easy pump change-over between internal and external circulatio

PharMed® Extension tubing for Cassette small
• Application: Ideal for medical, lab and research uses
Features:
• High fatigue strength under repeated reversed bending stresses
• Non-toxic, biocompatible
• Very low gas permeability
• Well suited to acids and bases
• Material: Thermoplastic elastomer on a polypropylene base with plasticizers; excellent tensile strength; opaque
• Complies with the standards: USP Class VI, GLP, Pharmacopoea and Europaea
• Temperature range: -51 to +135 °C
• Sterilization: Can be autoclaved or sterilized with ethylene oxide or sterilized by irradiation
• Restriction: Additives may migrate

Module for the optimum loading of large-volume laboratory glassware.
• Suitable for 4 1–2 litre measuring cylinders, high shape
• Suitable for 2 1–2 litre measuring cyl., low shape & 2 high shape
• Plastic-coated contact surfaces
• Measuring cylinders even removable when module is in machine
• Maximum length of measuring cylinders: 500 mm
• Up to 2 modules can be inserted in the baskets A 150 and APLW 106 ( it is not possible to use an upper basket at the same time).

Machine affiliation:
PLW 8636 [LAB / LAB MON]
PG 8583
PG 8583 CD
PG 8593
PLW 7111
PLW 8604
PLW 8683
PLW 8683 CD
PLW 8693

ISF1-Z incubator shaker - the perfect solution for shaken cultivation processes
The ISF1-Z incubator shaker is suitable for applications in laboratories, research centers and production facilities. The ISF1-Z complies with GMP (good manufacturing practice) requirements and regulations. It offers a large shaking capacity with a small footprint and many features allowing straightforward, safe handling of any culture or product. The incubator shaker is applicable for microbial, plant, human and animal cell cultures.
Performance characteristics of ISF1-Z models:
• Large shaking capacity with small footprint
• Hygienic design according to DIN EN ISO 14159
• Improved direct drive: stronger, higher shaking frequencies, very long lasting
• Up to three machines can be stacked without additional components: incubators ISF1-X/W and new ISF1-Z mixable in stack
• Flexible and retrofittable: all options and accessories applicable
Includes all features of the basic model plus:
• Vast temperature range: from 3 to 80°C, it provides the user a greater flexibility in terms of low and high temperatures.
• Fast cooling and heating
• Low temperatures for storage and inoculum preparation
• Two cooling units with eco-friendly natural gas
• Humidifying and dehumidifying possible
Detailed technical data can be found in the product catalog.

Selection of the suitable SONOREX SUPER depends on the sizes and numbers of objects to be cleaned and of the sample vessels to be sonicated. Different sizes of ultrasonic baths are available for various applications.

Features

• PZT-large area oscillating systems
• HF-Frequency 35 kHz
• Timer 1 - 15 minutes and continuous operation
• Housing of stainless steel - drip proof
• Drain cock included for easy emptying (from RK 100 SH upward )
• SONOREX SUPER units are CE marked

DYNEO DD heating circulators for internal and external applications are equipped with closed bath tanks. The tanks are well insulated and include a coil for counter-cooling. An integrated drain tap makes emptying the tank safe and clean. The multilingual 3.5-inch color display and unique rotary knob provide for straightforward and intuitive operation.

Optional analog and digital interface

DYNEO thermostats can optionally be equipped with analogue and digital interfaces. To request the options, order number must be extended with .d for the digital and .a for the analog interface (9XXX XXXX.A / 9XXX XXX.D)

Your advantages

• For internal and external applications
• USB connection
• Powerful and infinitely adjustable pressure pump
• Flow rate 27 l/min, pressure 0.7 bar
• Easy switching between internal and external circulation
• Large color TFT display, multilingual interface
• Central rotary knob (controller) simplifies operation
• Integrated programmer for 8 x 60 program steps
• Integrated external Pt100 connection
• RS232 interface or analog interfaces (optional)
• Bath cover included with delivery
• For internal and external applications
• High-quality thermal insulation of the bath tank
• Integrated programmer
• Integrated drain makes emptying liquid easy and safe.

Module For reprocessing viscometers.
• Suitable for up to 8 viscometers
• Equipped with 8 x A 867 special nozzles
• Nozzle spacing 118 mm across the width, 118 mm across the depth

Machine affiliation:
PLW 8636 [LAB / LAB MON]
PG 8583
PG 8583 CD
PG 8593
PLW 7111
PLW 8604
PLW 8683
PLW 8683 CD
PLW 8693

ISF1-Z incubator shaker - the perfect solution for shaken cultivation processes
The ISF1-Z incubator shaker is suitable for applications in laboratories, research centers and production facilities. The ISF1-Z complies with GMP (good manufacturing practice) requirements and regulations. It offers a large shaking capacity with a small footprint and many features allowing straightforward, safe handling of any culture or product. The incubator shaker is applicable for microbial, plant, human and animal cell cultures.
Performance characteristics of ISF1-Z models
• Large shaking capacity with small footprint
• Hygienic design according to DIN EN ISO 14159
• Improved direct drive: stronger, higher shaking frequencies, very long lasting
• Up to three machines can be stacked without additional components: incubators ISF1-X/W and new ISF1-Z mixable in stack
• Flexible and retrofittable: all options and accessories applicable
• Fast, direct information through parallel and clear display of all process parameters
ISF1-Z Models
• The ISF1-Z incubator shaker is available in three different models: ISF1-Z, ISF1-Z EcoDew and ISF1-Z Peltier. Each model provides distinct features and is additionally available with CO2 control for cell culture processes.
• The ISF1-Z EcoDew® includes temperature control (heating) and Kuhners EcoDew® technology for humidity control. No cooling compressor unit is required for the precise and eco-friendly EcoDew® technology.
100% stainless steel for easy cleaning
• The ISF1-Z is available in a 100% stainless steel finish. It can either be painted white or have a processed stainless steel look. Take a look at the video to see the advantages of having stainless steel inside and outside the shaker.
Quality
• The improved maintenance-free direct drive of the ISF1-Z is stronger, offers higher shaking frequencies and has a longer lifespan than ever. It guarantees accurate control and low energy consumption/heat dissipation even at high speeds. Kuhner’s direct drive system and the newly designed shaking table allows the shaking diameter to be changed at any time – quickly and easily. Different fixed shaking diameters (3, 6, 9, 12.5, 19, 25, 50, 70 mm) are adjustable. And even a stepless adjustment is available as an option.
• All ISF1-Z components are designed for durability and reliability. A Kuhner shaker is a cost effective investment in quality backed with a five year warranty.
Hygienic design
• The ISF1-Z is made of stainless steel inside and outside for easy and fast cleaning. The hygienic design complies with GMP requirements. The interior was designed according to DIN EN ISO 14159. It has rounded corners and a drain at the back for quick removal of any unwanted liquids. The direct drive system is completely covered and therefore protected from spills. The incubator chamber can be cleaned with chemicals or sterilized using optional UV lighting.
A system that grows with your needs
• Up to three ISF1-Z incubators can be stacked providing more shaking capacity without taking up more floor space in the lab. Stacking is a simple procedure without the need for special tools or stacking kits. Each machine operates independently. The ISF1-Z incubator shakers are mixable in stack with ISF1-X/W incubators.
Options, accessories, and more
• Numerous options and accessories are available for the ISF1-Z incubator shaker to fulfill any need of our customers regarding cultivations in shaken bioreactors. Moreover, all accessories are interchangeable between the new ISF1-Z incubators and its predecessors ISF1-X/W. The ISF1-Z offers even more interior space than its predecessor ISF1-X, e.g. to accommodate particularly big shake flasks. The ISF1-Z has clearly arranged displays on the front side (e.g. for shaking speed) with color change and an acoustic signal when an error/alarm occurs.
• Additionally, a fix or a tilting touchscreen version with our Kuhner Insight software is available. Serial interfaces (e.g. CAN) are arranged on the front side and the sensors in the inside are also easily accessible for a fast and comfortable work flow. The interior LED light is a color neutral light with low energy dissipation.
Detailed technical data can be found in the product catalog.