All products


% Heidolph BR 10 Cross-Blade Impeller (V4A) • Due to its blade dimensions, the straight-blade impeller BR 11 is ideally suited for solutions, emulsions and suspensions in vessels with the following characteristics: • Ideal vessel diameter: 100 mm • Ideal ground clearance: 5 mm • Ideal filling level: 100 mm • Ideal volume: 800 ml • The straight-blade impeller BR 11 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm.	% Miele E 106/2 insert 1/2 For the optimum loading of wide neck flasks, measuring cylinders, etc. • Area of application: reprocessing laboratory glassware • Equipped with 13 large spring hooks x 175 mm height • The distance between the spring hooks is approx. 85 mm Machine affiliation: G 7825 PG 8527 PG 8535 PG 8536 PLW 8636 [LAB / LAB MON] PG 8504 PG 8583 PG 8583 CD PG 8593 PLW 8615 PLW 8616 PLW 8617 PLW 8683 PLW 8683 CD PLW 8693 PLW 6011 PLW 6111 PLW 7111 PLW 8505 PLW 8604	% Vacuubrand chemistry vacuum system MD 4C NT +AK SYNCHRO+EK This chemistry vacuum system provides the simultaneous operation of two processes with only one pump. Typical applications are rotary evaporators, vacuum concentrators and vacuum drying ovens. Each vacuum connection is provided with a manual valve to regulate the effective flow at each port. The MD 4C NT pump offers more than sufficient pumping speed also for the parallel operation of two challenging applications. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling and active protection of the environment. Performance features • outstanding chemical resistance and superior vapor tolerance • exceptionally high performance even at low vacuum • excellent ultimate vacuum even with gas ballast • simultaneous operation of two independent vacuum applications, with reliable check valves to prevent interference between systems • excellent environmental friendliness due to efficient solvent recovery	% Julabo PRESTO W80t Highly dynamic temperature control system Advanced control technology and a small bath fluid reservoir enable highly dynamic temperature control systems to achieve rapid heat-up and cool-down. This gives you the ability to handle difficult temperature challenges quickly. The PRESTO® systems are designed for precise temperature control as well as rapid temperature changes, making them ideal for reactor vessels, material stress tests, or temperature simulations. These instruments cover a working temperature of -92 to +250 °C with high cooling and heating capacity. • USB connection • For highly precise, external temperature applications • Rapid heating and cooling • Wide working temperature ranges without changing fluids • Highest performance with small footprint • Space-saving design optimizes space utilization in your lab • Ethernet interface • SD-Card slot • RS232 / RS485 (optional) / Profibus DP (optional) • Connections for alarm-output, Pt100 external sensor and standby-input • Removable ventilation grid • Highly precise ICC cascade temperature control • Electronic level indication • Integrated programmer • Unsurpassed power and efficiency • Space optimized design creates more room directly next to the units • External Pt100 sensor connection
% Julabo PRESTO W85 Highly dynamic temperature control system Advanced control technology and a small bath fluid reservoir enable highly dynamic temperature control systems to achieve rapid heat-up and cool-down. This gives you the ability to handle difficult temperature challenges quickly. The PRESTO® systems are designed for precise temperature control as well as rapid temperature changes, making them ideal for reactor vessels, material stress tests, or temperature simulations. These instruments cover a working temperature of -92 to +250 °C with high cooling and heating capacity. • USB connection • For highly precise, external temperature applications • Rapid heating and cooling • Wide working temperature ranges without changing fluids • Highest performance with small footprint • Space-saving design optimizes space utilization in your lab • Ethernet interface • SD-Card slot • RS232 / RS485 (optional) / Profibus DP (optional) • Connections for alarm-output, Pt100 external sensor and standby-input • Removable ventilation grid • Highly precise ICC cascade temperature control • Electronic level indication • Integrated programmer • Unsurpassed power and efficiency • Space optimized design creates more room directly next to the units • External Pt100 sensor connection	% Heidolph BR 11 Straight-Blade Impeller (V4A) • Due to its blade dimensions, the straight-blade impeller BR 11 is ideally suited for solutions, emulsions and suspensions in vessels with the following characteristics: • Ideal vessel diameter: 100 mm • Ideal ground clearance: 5 mm • Ideal filling level: 100 mm •Ideal volume: 800 ml • The straight-blade impeller BR 11 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm.	% Miele E 109 insert 1/2 For the optimum loading of beakers up to 250 ml. • Area of application: reprocessing laboratory glassware • Suitable for 21 glass beakers up to 250 ml • Equipped with 21 x 3 stay bars • For use in upper and lower basket Machine affiliation: G 7825 PG 8527 PG 8535 PG 8536 PLW 8636 [LAB / LAB MON] PG 8504 PG 8583 PG 8583 CD PG 8593 PLW 8505 PLW 8604 PLW 8615 PLW 8616 PLW 8617 PLW 8683 PLW 8683 CD PLW 8693 PLW 6011 PLW 6111 PLW 7111	% Julabo PRESTO W85t Highly dynamic temperature control system Advanced control technology and a small bath fluid reservoir enable highly dynamic temperature control systems to achieve rapid heat-up and cool-down. This gives you the ability to handle difficult temperature challenges quickly. The PRESTO® systems are designed for precise temperature control as well as rapid temperature changes, making them ideal for reactor vessels, material stress tests, or temperature simulations. These instruments cover a working temperature of -92 to +250 °C with high cooling and heating capacity. • USB connection • For highly precise, external temperature applications • Rapid heating and cooling • Wide working temperature ranges without changing fluids • Highest performance with small footprint • Space-saving design optimizes space utilization in your lab • Ethernet interface • SD-Card slot • RS232 / RS485 (optional) / Profibus DP (optional) • Connections for alarm-output, Pt100 external sensor and standby-input • Removable ventilation grid • Highly precise ICC cascade temperature control • Electronic level indication • Integrated programmer • Unsurpassed power and efficiency • Space optimized design creates more room directly next to the units • External Pt100 sensor connection
% Julabo PRESTO W91 Highly dynamic temperature control system Advanced control technology and a small bath fluid reservoir enable highly dynamic temperature control systems to achieve rapid heat-up and cool-down. This gives you the ability to handle difficult temperature challenges quickly. The PRESTO® systems are designed for precise temperature control as well as rapid temperature changes, making them ideal for reactor vessels, material stress tests, or temperature simulations. These instruments cover a working temperature of -92 to +250 °C with high cooling and heating capacity. • USB connection • For highly precise, external temperature applications • Rapid heating and cooling • Wide working temperature ranges without changing fluids • Highest performance with small footprint • Space-saving design optimizes space utilization in your lab • Ethernet interface • SD-Card slot • RS232 / RS485 (optional) / Profibus DP (optional) • Connections for alarm-output, Pt100 external sensor and standby-input • Removable ventilation grid • Highly precise ICC cascade temperature control • Electronic level indication • Integrated programmer • Unsurpassed power and efficiency • Space optimized design creates more room directly next to the units • External Pt100 sensor connection	% Heidolph BR 12 Pivoting-Blade Impeller (V4A) • Especially when using narrow-necked vessels, e.g. round-bottom flasks, a stirring tool with pivoting blades is used. Just like our pivoting-blade impeller BR 12. •This blade impeller is ideal for dissolving and homogenizing in vessels with the following characteristics: • Ideal vessel diameter: 120 mm • Ideal ground clearance: 6 mm • Ideal filling level: 120 mm • Ideal volume: 1,400 ml • The pivoting-blade impeller BR 12 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm.	% Miele E 110 insert 1/2 For the optimum loading of beakers from 250 to 600 ml. • Area of application: reprocessing laboratory glassware • Suitable for 10 glass beakers between 250 - 600 ml • Equipped with 10 x 3 stay bars • For use in lower basket Machine affiliation: G 7825 PG 8527 PG 8535 PG 8536 PLW 8636 [LAB / LAB MON] PG 8504 PG 8583 PG 8583 CD PG 8593 PLW 8505 PLW 8604 PLW 8615 PLW 8616 PLW 8617 PLW 8683 PLW 8683 CD PLW 8693 PLW 6011 PLW 6111 PLW 7111	% Julabo PRESTO W91tt Highly dynamic temperature control system Advanced control technology and a small bath fluid reservoir enable highly dynamic temperature control systems to achieve rapid heat-up and cool-down. This gives you the ability to handle difficult temperature challenges quickly. The PRESTO® systems are designed for precise temperature control as well as rapid temperature changes, making them ideal for reactor vessels, material stress tests, or temperature simulations. These instruments cover a working temperature of -92 to +250 °C with high cooling and heating capacity. • USB connection • For highly precise, external temperature applications • Rapid heating and cooling • Wide working temperature ranges without changing fluids • Highest performance with small footprint • Space-saving design optimizes space utilization in your lab • Ethernet interface • SD-Card slot • RS232 / RS485 (optional) / Profibus DP (optional) • Connections for alarm-output, Pt100 external sensor and standby-input • Removable ventilation grid • Highly precise ICC cascade temperature control • Electronic level indication • Integrated programmer • Unsurpassed power and efficiency • Space optimized design creates more room directly next to the units • External Pt100 sensor connection
% Julabo PRESTO W91x Highly dynamic temperature control system Advanced control technology and a small bath fluid reservoir enable highly dynamic temperature control systems to achieve rapid heat-up and cool-down. This gives you the ability to handle difficult temperature challenges quickly. The PRESTO® systems are designed for precise temperature control as well as rapid temperature changes, making them ideal for reactor vessels, material stress tests, or temperature simulations. These instruments cover a working temperature of -92 to +250 °C with high cooling and heating capacity. • USB connection • For highly precise, external temperature applications • Rapid heating and cooling • Wide working temperature ranges without changing fluids • Highest performance with small footprint • Space-saving design optimizes space utilization in your lab • Ethernet interface • SD-Card slot • RS232 / RS485 (optional) / Profibus DP (optional) • Connections for alarm-output, Pt100 external sensor and standby-input • Removable ventilation grid • Highly precise ICC cascade temperature control • Electronic level indication • Integrated programmer • Unsurpassed power and efficiency • Space optimized design creates more room directly next to the units • External Pt100 sensor connection	% Heidolph BR 13 Square-Blade Impeller (V4A) • Due to its blade dimensions, the square-blade impeller BR 13 is ideal for loosening and homogenizing in vessels with the following characteristics: • Ideal vessel diameter: 140 mm • Ideal ground clearance: 7 mm • Ideal filling level: 140 mm • Ideal volume: 2,200 ml • The square-blade impeller BR 13 has a total length of 450 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm.	% Miele E 111 insert 1/2 For the optimum loading of beakers from 600 to 1,000 ml. • Area of application: reprocessing laboratory glassware • Suitable for 8 glass beakers between 600 - 1000 ml • Equipped with 8 x 3 stay bars • For use in lower basket Machine affiliation: G 7825 PG 8527 PG 8535 PG 8536 PLW 8636 [LAB / LAB MON] PG 8504 PG 8583 PG 8583 CD PG 8593 PLW 8505 PLW 8604 PLW 8615 PLW 8616 PLW 8617 PLW 8683 PLW 8683 CD PLW 8693 PLW 6011 PLW 6111 PLW 7111	% Julabo PRESTO W91ttx Highly dynamic temperature control system Advanced control technology and a small bath fluid reservoir enable highly dynamic temperature control systems to achieve rapid heat-up and cool-down. This gives you the ability to handle difficult temperature challenges quickly. The PRESTO® systems are designed for precise temperature control as well as rapid temperature changes, making them ideal for reactor vessels, material stress tests, or temperature simulations. These instruments cover a working temperature of -92 to +250 °C with high cooling and heating capacity. • USB connection • For highly precise, external temperature applications • Rapid heating and cooling • Wide working temperature ranges without changing fluids • Highest performance with small footprint • Space-saving design optimizes space utilization in your lab • Ethernet interface • SD-Card slot • RS232 / RS485 (optional) / Profibus DP (optional) • Connections for alarm-output, Pt100 external sensor and standby-input • Removable ventilation grid • Highly precise ICC cascade temperature control • Electronic level indication • Integrated programmer • Unsurpassed power and efficiency • Space optimized design creates more room directly next to the units • External Pt100 sensor connection
% Julabo PRESTO W92 Highly dynamic temperature control system Advanced control technology and a small bath fluid reservoir enable highly dynamic temperature control systems to achieve rapid heat-up and cool-down. This gives you the ability to handle difficult temperature challenges quickly. The PRESTO® systems are designed for precise temperature control as well as rapid temperature changes, making them ideal for reactor vessels, material stress tests, or temperature simulations. These instruments cover a working temperature of -92 to +250 °C with high cooling and heating capacity. • USB connection • For highly precise, external temperature applications • Rapid heating and cooling • Wide working temperature ranges without changing fluids • Highest performance with small footprint • Space-saving design optimizes space utilization in your lab • Ethernet interface • SD-Card slot • RS232 / RS485 (optional) / Profibus DP (optional) • Connections for alarm-output, Pt100 external sensor and standby-input • Removable ventilation grid • Highly precise ICC cascade temperature control • Electronic level indication • Integrated programmer • Unsurpassed power and efficiency • Space optimized design creates more room directly next to the units • External Pt100 sensor connection	% Heidolph BR 14 Collapsible-Blade Impeller (V4A) • Especially when using narrow-necked vessels, e.g. round-bottom flasks, an stirring tool with collapsible blades is used. Just like our collapsible-blade impeller BR 14. • This blade impeller is ideal for dissolving and homogenizing in vessels with the following characteristics: • Ideal vessel diameter: 180 mm • Ideal ground clearance: 9 mm • Ideal filling level: 180 mm • Ideal volume: 4,600 ml • The collapsible-blade impeller BR 14 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm.	% Miele E 118 insert 1/1 For the optimum loading of half petri dishes. • Suitable for 38 half petri dishes with Ø 100 mm • Equipped with 38 holders, height 70 mm, distance approx. 26 mm • For use in upper basket Machine affiliation: G 7825 PG 8527 PG 8535 PG 8536 PLW 8636 [LAB / LAB MON] PG 8504 PG 8583 PG 8583 CD PG 8593 PLW 8505 PLW 8604 PLW 8615 PLW 8616 PLW 8617 PLW 8683 PLW 8683 CD PLW 8693 PLW 6011 PLW 6111 PLW 7111	% Julabo PRESTO W92tt Highly dynamic temperature control system Advanced control technology and a small bath fluid reservoir enable highly dynamic temperature control systems to achieve rapid heat-up and cool-down. This gives you the ability to handle difficult temperature challenges quickly. The PRESTO® systems are designed for precise temperature control as well as rapid temperature changes, making them ideal for reactor vessels, material stress tests, or temperature simulations. These instruments cover a working temperature of -92 to +250 °C with high cooling and heating capacity. • USB connection • For highly precise, external temperature applications • Rapid heating and cooling • Wide working temperature ranges without changing fluids • Highest performance with small footprint • Space-saving design optimizes space utilization in your lab • Ethernet interface • SD-Card slot • RS232 / RS485 (optional) / Profibus DP (optional) • Connections for alarm-output, Pt100 external sensor and standby-input • Removable ventilation grid • Highly precise ICC cascade temperature control • Electronic level indication • Integrated programmer • Unsurpassed power and efficiency • Space optimized design creates more room directly next to the units • External Pt100 sensor connection