All products

Evaporating flasks come with a standard NS 29/32 joint size and are also available with NS 24/29 ground joints.

Evaporating flasks come with a standard NS 29/32 joint size are also available with NS 24/29 ground joints 

For measuring the conductivity level and the display for changing the cartridge.
• Suitable for full demineralisation cartridges
• Optical and acoustic display for cartridge change
• 10 switch points in measuring range 0 - 199.9 µS/cm
• One-line display, connection to external LED possible
• Including wall bracket and power unit (Input: 110 - 240 V, 50/60 Hz, 85 mA)

Evaporating flasks come with a standard NS 29/32 joint size are also available with NS 24/29 ground joints

With their robust design and precise temperature control, Peltier chillers are ideal for simple temperature control tasks in laboratories and research facilities. They operate without refrigerants and are therefore very environmentally friendly. At the same time, the reliable chillers contribute to lowering operating costs and reducing the ecological footprint thanks to their energy-efficient operation.

The TE400 uses fewer movable components such as compressors for cooling. This makes it comparatively low-maintenance and less susceptible to wear. The Peltier chiller offers a cooling capacity of up to 400 watts and a pump capacity of up to 7 l/min and impresses with its high temperature stability for a wide range of different applications.

Silent Mode

The TE400 Peltier chiller is equipped with an additional operating mode for use with lower cooling power requirements. The noise level is significantly reduced in Silent Mode, contributing to a more pleasant working atmosphere.

Product features

• High temperature stability
• Environmentally friendly operation with low energy consumption
• Economical operation due to high energy efficiency and low energy consumption
• Touch display for easy operation

These powerful rotary vane pumps feature an unusually compact design and low weight for pumps of this capacity. They are the ideal solution for a wide range of laboratory and process applications that require low ultimate vacuum at medium to increased gas flow rate.

Performance features

• high flow rates even at vacuum levels approaching ultimate vacuum
• high water vapor tolerance due to efficient gas ballast; very good ultimate vacuum even with gas ballast
• vacuum-tight at switch-off; external anti-suckback valve not needed
• large oil volume: Long intervals between oil changes
• ease of maintenance due to telescopic design

Foam brake comes with a standard of NS 29/32 joint size are also available with NS 24/29 ground joints.
• The maximum recommended load is 1,5 kg (3-l-flask)

With the help of high-quality Ohaus Frontier rotors and adapters, you can find the best solution for both basic and high-performance sample preparation needs.

Aqua purificator for two full or partial demineralisation cartridges.
• Suitable for VE/TE P 2800 & VE/TE P 2000
• Possible to hold conductivity meter/flow meter
• Ext. dimen.: H 835 (820 w/o lid), W 300, D 600 mm

The powerful mid-size one-stage RE 9 rotary vane pumps are the ideal solution for a wide range of laboratory and process applications that require high pumping speed.

Performance features

• very high flow rates even at vacuum levels approaching ultimate vacuum
• high water vapor tolerance due to efficient gas ballast; very good ultimate vacuum even with gas ballast
• vacuum-tight at switch-off; external anti-suckback valve not needed
• large oil volume: Long intervals between oil changes
• ease of maintenance due to telescopic design

With the help of high-quality Ohaus Frontier rotors and adapters, you can find the best solution for both basic and high-performance sample preparation needs.

JULABO FL RECIRCULATING COOLERS
compact models with up to 1.7 kW of cooling capacity
for installation below a lab bench

• The compact FL models are suited for a wide variety of cooling tasks
• Installation under a lab bench saves valuable space
• Easy filling from above
• Feed pressure indicator (FL1201 and above) and level indicator (all models)
• Large compensation volume
• Circulating pumps designed for continuous operation
• Permissible return temperature up to +80 °C
• Low liquid level protection with visual and acoustic signals
• May be used with water, water-glycol, Thermal bath fluid
• Overload protection for pump motor and cooling machine
• 2 variants: Air-cooled (FL) and water-cooled (FLW)

JULABO FL RECIRCULATING COOLERS
compact models with up to 1.7 kW of cooling capacity
for installation below a lab bench

• The compact FL models are suited for a wide variety of cooling tasks
• Installation under a lab bench saves valuable space
• Easy filling from above
• Feed pressure indicator (FL1201 and above) and level indicator (all models)
• Large compensation volume
• Circulating pumps designed for continuous operation
• Permissible return temperature up to +80 °C
• Low liquid level protection with visual and acoustic signals
• May be used with water, water-glycol, Thermal bath fluid
• Overload protection for pump motor and cooling machine
• 2 variants: Air-cooled (FL) and water-cooled (FLW)

JULABO FL RECIRCULATING COOLERS
compact models with up to 1.7 kW of cooling capacity
for installation below a lab bench

• The compact FL models are suited for a wide variety of cooling tasks
• Installation under a lab bench saves valuable space
• Easy filling from above
• Feed pressure indicator (FL1201 and above) and level indicator (all models)
• Large compensation volume
• Circulating pumps designed for continuous operation
• Permissible return temperature up to +80 °C
• Low liquid level protection with visual and acoustic signals
• May be used with water, water-glycol, Thermal bath fluid
• Overload protection for pump motor and cooling machine
• 2 variants: Air-cooled (FL) and water-cooled (FLW)

JULABO FL RECIRCULATING COOLERS
compact models with up to 1.7 kW of cooling capacity
for installation below a lab bench
The compact FL models are suited for a wide variety of cooling tasks. Installation under a lab bench saves valuable space. 2 variants: Air-cooled (FL) and water-cooled (FLW).
• Easy filling from above
• Feed pressure indicator (FL1201 and above) and level indicator (all models)
• Large compensation volume
• Circulating pumps designed for continuous operation
• Permissible return temperature up to +80 °C
• Low liquid level protection with visual and acoustic signals
• May be used with water, water-glycol, Thermal bath fluid
• Overload protection for pump motor and cooling machine

JULABO FL RECIRCULATING COOLERS
compact models with up to 1.7 kW of cooling capacity
for installation below a lab bench
The compact FL models are suited for a wide variety of cooling tasks. Installation under a lab bench saves valuable space. 2 variants: Air-cooled (FL) and water-cooled (FLW).
• Easy filling from above
• Feed pressure indicator (FL1201 and above) and level indicator (all models)
• Large compensation volume
• Circulating pumps designed for continuous operation
• Permissible return temperature up to +80 °C
• Low liquid level protection with visual and acoustic signals
• May be used with water, water-glycol, Thermal bath fluid
• Overload protection for pump motor and cooling machine

JULABO FL RECIRCULATING COOLERS
compact models with up to 1.7 kW of cooling capacity
for installation below a lab bench
The compact FL models are suited for a wide variety of cooling tasks. Installation under a lab bench saves valuable space. 2 variants: Air-cooled (FL) and water-cooled (FLW).
• Easy filling from above
• Feed pressure indicator (FL1201 and above) and level indicator (all models)
• Large compensation volume
• Circulating pumps designed for continuous operation
• Permissible return temperature up to +80 °C
• Low liquid level protection with visual and acoustic signals
• May be used with water, water-glycol, Thermal bath fluid
• Overload protection for pump motor and cooling machine

JULABO FL RECIRCULATING COOLERS
compact models with up to 1.7 kW of cooling capacity
for installation below a lab bench
The compact FL models are suited for a wide variety of cooling tasks. Installation under a lab bench saves valuable space. 2 variants: Air-cooled (FL) and water-cooled (FLW).
• Easy filling from above
• Feed pressure indicator (FL1201 and above) and level indicator (all models)
• Large compensation volume
• Circulating pumps designed for continuous operation
• Permissible return temperature up to +80 °C
• Low liquid level protection with visual and acoustic signals
• May be used with water, water-glycol, Thermal bath fluid
• Overload protection for pump motor and cooling machine

JULABO FL RECIRCULATING COOLERS
compact models with up to 1.7 kW of cooling capacity
for installation below a lab bench
The compact FL models are suited for a wide variety of cooling tasks. Installation under a lab bench saves valuable space. 2 variants: Air-cooled (FL) and water-cooled (FLW).
• Easy filling from above
• Feed pressure indicator (FL1201 and above) and level indicator (all models)
• Large compensation volume
• Circulating pumps designed for continuous operation
• Permissible return temperature up to +80 °C
• Low liquid level protection with visual and acoustic signals
• May be used with water, water-glycol, Thermal bath fluid
• Overload protection for pump motor and cooling machine

JULABO FL RECIRCULATING COOLERS
compact models with up to 1.7 kW of cooling capacity
for installation below a lab bench
The compact FL models are suited for a wide variety of cooling tasks. Installation under a lab bench saves valuable space. 2 variants: Air-cooled (FL) and water-cooled (FLW).
• Easy filling from above
• Feed pressure indicator (FL1201 and above) and level indicator (all models)
• Large compensation volume
• Circulating pumps designed for continuous operation
• Permissible return temperature up to +80 °C
• Low liquid level protection with visual and acoustic signals
• May be used with water, water-glycol, Thermal bath fluid
• Overload protection for pump motor and cooling machine