All products


% Heidolph Heat-On 500-ml block This Heat-On Block is suitable for all applications in which a 500 ml round bottom flask is to be heated up. The maximum temperature for continuous use is 260 °C. In order to measure this precisely with a temperature sensor, a small hole is provided on one side of the Heat-On Block. For comfortable and safe transport of the Heat-On Blocks - especially in hot condition - optional safety lifting handles are available separately. For an efficient reaction with no loss of media, it is recommended to use solvent volumes of up to 250 ml.	% Heidolph Heat-On 250-ml block with flask sidearm cutouts This Heat-On Block is suitable for 250 ml multineck flasks, as the lateral recesses were designed for this purpose. The maximum temperature for continuous use is 260 °C. In order to measure this precisely with a temperature sensor, a small hole is provided on one side of the Heat-On Block. For comfortable and safe transport of the Heat-On Blocks - especially in hot condition - optional safety lifting handles are available separately. For an efficient reaction with no loss of media, it is recommended to use solvent volumes of up to 125 ml.	% Heidolph Heat-On 250-ml block This Heat-On Block is suitable for all applications in which a 250 ml round bottom flask is to be heated up. The maximum temperature for continuous use is 260 °C. In order to measure this precisely with a temperature sensor, a small hole is provided on one side of the Heat-On Block. For comfortable and safe transport of the Heat-On Blocks - especially in hot condition - optional safety lifting handles are available separately. For an efficient reaction with no loss of media, it is recommended to use solvent volumes of up to 125 ml.	% Heidolph Heat-On 100-ml block with flask sidearm cutouts This Heat-On Block is suitable for 100 ml multineck flasks, as the lateral recesses were designed for this purpose. The maximum temperature for continuous use is 260 °C. In order to measure this precisely with a temperature sensor, a small hole is provided on one side of the Heat-On Block. For comfortable and safe transport of the Heat-On Blocks - especially in hot condition - optional safety lifting handles are available separately. For an efficient reaction with no loss of media, it is recommended to use solvent volumes of up to 50 ml.
% Heidolph Package Heat-On Multi-Well This package includes the Multi-Well holder and 6 inserts for small round bottom flasks. The Heat-On inserts are suitable for 25-ml, 50-ml and 100-ml round bottom flasks respectively; a maximum of two flasks at a time can be received by the Multi-Well holder. The maximum temperature for continuous use is 260 °C. In order to measure this precisely with a temperature sensor, a small hole is provided on one side of the Heat-On Block. The safety lifting handles are optional and so they are available separately.	% Heidolph Package Heat-On Multi-Well Basic This package includes the Multi-Well holder and 3 inserts for small round bottom flasks. The Heat-On inserts are suitable for 25-ml, 50-ml and 100-ml round bottom flasks respectively; a maximum of two flasks at a time can be received by the Multi-Well holder. The maximum temperature for continuous use is 260 °C. In order to measure this precisely with a temperature sensor, a small hole is provided on one side of the Heat-On Block. The safety lifting handles are optional and so they are available separately.	% Heidolph Heat-On Multi-Well 150-ml insert This Heat-On insert is suitable for heating 150 ml round bottom flasks. For optimal use it is recommended that you buy the Multi-Well holder together with safety lifting handles. The maximum temperature for continuous use is 260 °C. In order to measure this precisely with a temperature sensor, a small hole is provided on one side of the Heat-On Block.	% Heidolph Heat-On Multi-Well 100-ml insert This Heat-On insert is suitable for heating 100 ml round bottom flasks. For optimal use it is recommended that you buy the Multi-Well holder together with safety lifting handles. The maximum temperature for continuous use is 260 °C. In order to measure this precisely with a temperature sensor, a small hole is provided on one side of the Heat-On Block.
% Heidolph Heat-On Multi-Well 50-ml insert This Heat-On insert is suitable for heating 50 ml round bottom flasks. For optimal use it is recommended that you buy the Multi-Well holder together with safety lifting handles. The maximum temperature for continuous use is 260 °C. In order to measure this precisely with a temperature sensor, a small hole is provided on one side of the Heat-On Block.	% Heidolph Heat-On Multi-Well 25-ml insert This Heat-On insert is suitable for heating 25 ml round bottom flasks. For optimal use it is recommended that you buy the Multi-Well holder together with safety lifting handles. The maximum temperature for continuous use is 260 °C. In order to measure this precisely with a temperature sensor, a small hole is provided on one side of the Heat-On Block.	% Heidolph Heat-On Multi-Well 10-ml insert This Heat-On insert is suitable for heating 10 ml round bottom flasks. For optimal use it is recommended that you buy the Multi-Well holder together with safety lifting handles. The maximum temperature for continuous use is 260 °C. In order to measure this precisely with a temperature sensor, a small hole is provided on one side of the Heat-On Block.	% Heidolph Heat-On Multi-Well Holder Replace oil baths and jacket heaters in your lab and reduce the risk of fire. Heat-On blocks are by far the safest, fastest and most efficient method for heating and mixing solutions in round bottom flasks from 10 ml to 5 l. • Highest Level of Safety Increased occupational safety and fire protection: The elimination of oil baths prevents accidents, fires and contamination. The unique design prevents glass breakage and thus minimizes the risk of possible cutting injuries and leaking liquids. The high temperature accuracy offers maximum safety for applications up to 260 °C. • Superior Ease of Use The temperature can be measured conveniently and precisely in the medium or directly at the reaction attachment. No oil is required as a heat conductor, as the attachments snugly enclose the flasks. The cleaning effort is minimized. The PTFE coating offers the highest resistance to chemicals and correspondingly many years of use. • Lasting Reduction of Cost of Ownership The simplified handling minimizes process times and increases sample throughput: 150 ml of water are brought to the boil in less than 11 minutes. In addition, the 66 % faster heating times compared to conventional oil baths save on energy costs.
% Heidolph Silicone protective cover (MR Hei-Tec / Hei-Connect / Hei-End) Protects the magnetic stirrer against splashes and dripping water.	% Heidolph Pt 1000 clamping system Includes support rod and attachment with cable inlet.	% Heidolph Temperature sensor Pt 1000 (stainless steel (V4A)) The optionally available temperature sensor Pt 1000 achieves precise values without any temperature fluctuations.	% Julabo DYNEO DD-BC26 Heating circulator DYNEO DD heating circulators for internal and external applications are equipped with closed bath tanks. The tanks are well insulated and include a coil for counter-cooling. An integrated drain tap makes emptying the tank safe and clean. The multilingual 3.5-inch color display and unique rotary knob provide for straightforward and intuitive operation. Optional analog and digital interface DYNEO thermostats can optionally be equipped with analogue and digital interfaces. To request the options, order number must be extended with .d for the digital and .a for the analog interface (9XXX XXXX.A / 9XXX XXX.D) Your advantages • For internal and external applications • USB connection • Powerful and infinitely adjustable pressure pump • Flow rate 27 l/min, pressure 0.7 bar • Easy switching between internal and external circulation • Large color TFT display, multilingual interface • Central rotary knob (controller) simplifies operation • Integrated programmer for 8 x 60 program steps • Integrated external Pt100 connection • RS232 interface or analog interfaces (optional) • Bath cover included with delivery • For internal and external applications • High-quality thermal insulation of the bath tank • Integrated programmer • Integrated drain makes emptying liquid easy and safe.
% Julabo DYNEO DD-BC12 Heating circulator DYNEO DD heating circulators for internal and external applications are equipped with closed bath tanks. The tanks are well insulated and include a coil for counter-cooling. An integrated drain tap makes emptying the tank safe and clean. The multilingual 3.5-inch color display and unique rotary knob provide for straightforward and intuitive operation. Optional analog and digital interface DYNEO thermostats can optionally be equipped with analogue and digital interfaces. To request the options, order number must be extended with .d for the digital and .a for the analog interface (9XXX XXXX.A / 9XXX XXX.D) Your advantages • For internal and external applications • USB connection • Powerful and infinitely adjustable pressure pump • Flow rate 27 l/min, pressure 0.7 bar • Easy switching between internal and external circulation • Large color TFT display, multilingual interface • Central rotary knob (controller) simplifies operation • Integrated programmer for 8 x 60 program steps • Integrated external Pt100 connection • RS232 interface or analog interfaces (optional) • Bath cover included with delivery • For internal and external applications • High-quality thermal insulation of the bath tank • Integrated programmer • Integrated drain makes emptying liquid easy and safe.	% Julabo DYNEO DD-BC6 Heating circulator DYNEO DD heating circulators for internal and external applications are equipped with closed bath tanks. The tanks are well insulated and include a coil for counter-cooling. An integrated drain tap makes emptying the tank safe and clean. The multilingual 3.5-inch color display and unique rotary knob provide for straightforward and intuitive operation. Optional analog and digital interface DYNEO thermostats can optionally be equipped with analogue and digital interfaces. To request the options, order number must be extended with .d for the digital and .a for the analog interface (9XXX XXXX.A / 9XXX XXX.D) Your advantages • For internal and external applications • USB connection • Powerful and infinitely adjustable pressure pump • Flow rate 27 l/min, pressure 0.7 bar • Easy switching between internal and external circulation • Large color TFT display, multilingual interface • Central rotary knob (controller) simplifies operation • Integrated programmer for 8 x 60 program steps • Integrated external Pt100 connection • RS232 interface or analog interfaces (optional) • Bath cover included with delivery • For internal and external applications • High-quality thermal insulation of the bath tank • Integrated programmer • Integrated drain makes emptying liquid easy and safe.	% Julabo DYNEO DD-BC4 Heating circulator DYNEO DD heating circulators for internal and external applications are equipped with closed bath tanks. The tanks are well insulated and include a coil for counter-cooling. An integrated drain tap makes emptying the tank safe and clean. The multilingual 3.5-inch color display and unique rotary knob provide for straightforward and intuitive operation. Optional analog and digital interface DYNEO thermostats can optionally be equipped with analogue and digital interfaces. To request the options, order number must be extended with .d for the digital and .a for the analog interface (9XXX XXXX.A / 9XXX XXX.D) Your advantages • For internal and external applications • USB connection • Powerful and infinitely adjustable pressure pump • Flow rate 27 l/min, pressure 0.7 bar • Easy switching between internal and external circulation • Large color TFT display, multilingual interface • Central rotary knob (controller) simplifies operation • Integrated programmer for 8 x 60 program steps • Integrated external Pt100 connection • RS232 interface or analog interfaces (optional) • Bath cover included with delivery • For internal and external applications • High-quality thermal insulation of the bath tank • Integrated programmer • Integrated drain makes emptying liquid easy and safe.	% Julabo DYNEO DD Immersion circulator DYNEO DD Heating Immersion Circulator DYNEO DD heating circulators for internal and external applications are equipped with closed bath tanks. The tanks are well insulated and include a coil for counter-cooling. An integrated drain tap makes emptying the tank safe and clean. The multilingual 3.5-inch color display and unique rotary knob provide for straightforward and intuitive operation. Optional analog and digital interface DYNEO thermostats can optionally be equipped with analogue and digital interfaces. To request the options, order number must be extended with .d for the digital and .a for the analog interface (9XXX XXXX.A / 9XXX XXX.D) Your advantages • Flexible installation options • USB connection • For internal and external applications • For internal and external applications • Powerful and infinitely adjustable pressure pump • Flow rate 27 l/min, pressure 0.7 bar • Easy switching between internal and external circulation • Large color TFT display, multilingual interface • Central rotary knob (controller) simplifies operation • Integrated programmer • Integrated external Pt100 connection • RS232 interface or analog interfaces (optional)