All products

The specialist for H2O pure type ASTM I

The OmniaPure-ST xs basic UV is the one stop solution to produce ultrapure water fulfilling highest demands of analytical and life sciences laboratories if no local water source is available for direct feedwater connection. The integrated feedwater tank for demineralized water allows a mobile production of ultrapure water even in remote locations.
The standardly integrated OptiFill dispenser is a jack-of-all-trades. It is so ergonomically shaped that it enables one-handed use, not only for system operation but also for the monitoring of all quality parameters.
Retractable and pivotable with a flexible connection for the most comfortable supply of ultrapure water to any vessel.

Features

• Reliable ASTM I ultrapure water quality
• The standardly supplied OptiFill dispenser
o enables one handed dispenser operation
o is detachable and ergonomically shaped
o can be turned and is height adjustable
• Integrated 7 l demineralized feedwater storage tank
• Spent filters are simply and quickly exchanged
• Very space saving – fits almost on an A4 sheet
• Clear view of controls with graphic display
• Leak sensor is standard
• Ready to use, including filter cartridge

Standard system components

• Compact housing with easily accessible operating and service hood that enables simple replacement of spent materials in a few seconds
• Build in feedwater tank with 7l volume for demineralized water storage
• Wide-range power supply unit with automatic voltage adjustment to 48 V that can be internationally used
• Quiet running long-life recirculation pump (< 40dB) for complete recirculation through all parts that contact media right up to the tip of the dispenser
• UV-unit with 185/254 nm wavelength for highest microbial cleanliness and TOC-reduction
• Ultrapure purification set for removal of inorganic substances and residual inorganic ions
• Quality rinse rinsing valve for complete disinfection of all parts that contact media as well as quality rinses in interval mode
• Multi-language microprocessor for the control and monitoring of all operating and performance parameters
• Dispenser with adapted microfiltration for sterile ultrapure water dispensing at the point-of-use

A special F-size universal tray (800x420mm) is now available to shake large Erlenmeyer flasks. It is ideal for cell culture.
This tray allows parallel shaking of 7 x 3L Corning Fernbach culture flasks or 7 x 5L Thomson Optimum Growth flasks at a maximum orbital diameter of 50mm. The FUM-V has no handles and a V support underneath the tray raises it above the clamping mechanism creating more space for flasks.
Clamps must be ordered separately. (Order number: 101425)

VARIO® chemistry pumping unit in action

The PC 3010 NT VARIO select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. With its combination of high pumping speed and fractional millibar ultimate vacuum, this pump is suitable for demanding applications with even high boiling point solvents at low temperatures. This pump is regularly used to support floor-standing rotary evaporators, vacuum drying ovens, distillation columns, and other similar work in miniplants, kilo labs, and scale-up facilities.

The integrated VACUU·SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU·SELECT controller continuously detects the boiling point and automatically adjusts the vacuum process as necessary.

In addition, the VARIO control algorithm maintains the desired vacuum level by running the motor only as fast as necessary. This prevents bumping and foaming, makes the pump whisper quiet, and extends maintenance intervals. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection.

Product features

• Ultimate vacuum: 0.6 mbar
• Ultimate vacuum with gas ballast: 1.2 mbar
• Max. pumping speed 50 Hz: 12.8 m3/h
• VACUU·SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory
• Automatic boiling point detection and adjustment of the vacuum for short process times
• Ideal for evaporation of large amounts of high-boiling solvents even at low temperatures
• Extraordinary diaphragm life for minimum operational and servicing costs
• Excellent environmental compatibility through low energy consumption and efficient solvent recovery

VARIO® chemistry diaphragm pump in action

The MV 10C NT VARIO select pump is an excellent solution for those who need high pumping speed and need fractional-millibar ultimate vacuum to work with high boiling point solvents even at low temperatures. Combined with the reliability born of its chemical resistant fluoropolymer and perfluoroelastomer wetted materials, this pump delivers reliable performance for floor-standing rotary evaporators, vacuum drying ovens, vacuum distillation columns, and other similar applications.
The integrated VACUU·SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU·SELECT controller continuously detects the boiling point and automatically adjusts the vacuum process as necessary.
With VARIO control, the pump runs only as fast is necessary. This extends the maintenance intervals and makes the pumping unit whisper quiet

Product features:
• Ultimate vacuum: 0.6 mbar
• Ultimate vacuum with gas ballast: 1.2 mbar
• Max. pumping speed 50 Hz: 12.8 m3/h
• VACUU·SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory
• Automatic boiling point detection and adjustment of the vacuum for short process times
• Ideal for evaporation of large amounts of high-boiling solvents even at low temperatures
• Extraordinary diaphragm life for minimum operational and servicing costs

VARIO® diaphragm pump in action

Four-stage diaphragm pumps like the MV 10 NT VARIO select are excellent solutions for continuous, oil-free pumping of non-corrosive gases to vacuum levels that are only a fraction of a millibar. With its high pumping speed, this pump is an excellent option for higher gas load applications or rapid pump down of vacuum chambers.

All wetted parts are made of aluminum, stainless steel and carefully selected plastics suitable for a wide range of applications with non-corrosive gases. The MV 10 NT VARIO select automatically adapts its motor speed to hold the desired vacuum level. That also means the pump is whisper-quiet and generates ultra-low vibrations, and has high leak tightness. The highly flexible fabric-reinforced double FKM diaphragm is ideal for extended operating life.

The VARIO® design includes the variable speed pump and the VACUU·SELECT® vacuum controller with an external gauge head. The demand-responsive motor speed control on VARIO® models further extends the already long lifetimes of diaphragms and valves. And oil-free operation means that there is no risk of contamination from backstreaming.

Product features

• Ultimate vacuum: 0.3 mbar
• Max. pumping speed 50 Hz: 11.1 m3/h
• VACUU·SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory
• Extraordinary diaphragm life for minimum operational and servicing costs
• Contamination-free pumping and evacuation
• High pumping speed, extraordinary ultimate vacuum and TURBO·MODE for use as backing pump for turbo pumps

VARIO® chemistry pumping unit in action

The PC 3012 NT VARIO select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. With its combination of high pumping speed and deep ultimate vacuum, this pump is suitable for demanding applications with even high boiling point solvents. This pump is regularly used to support floor-standing rotary evaporators, vacuum drying ovens, distillation columns, and other similar work in miniplants, kilo labs, and scale-up facilities.

The integrated VACUU·SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU·SELECT controller continuously detects the boiling point and automatically adjusts the vacuum process as necessary.

In addition, the VARIO control maintains the desired vacuum level by running the motor only as fast as necessary. This prevents bumping and foaming, makes the pump whisper quiet, and extends maintenance intervals. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection.

Product features

• Ultimate vacuum: 1.5 mbar
• Ultimate vacuum with gas ballast: 3 mbar
• Max. pumping speed 50 Hz: 14.3 m3/h
• VACUU·SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory
• Automatic boiling point detection and adjustment of the vacuum for short process times
• Meets high vacuum requirements for large quantities of most high boiling solvents
• Extraordinary diaphragm life for minimum operational and servicing costs
• Excellent environmental compatibility through low energy consumption and efficient solvent recovery

VARIO® diaphragm pump in action

This three-stage diaphragm pump is a powerful solution for continuous, oil-free pumping of non-corrosive gases to a vacuum level as deep as 1.5 mbar. With its high pumping speed, this pump is an excellent option for higher gas load applications or rapid pump down of vacuum chambers. All wetted parts are made of aluminum, stainless steel and carefully selected plastics suitable for a wide range of applications with non-corrosive gases.

The MD 12 NT VARIO select automatically adapts its motor speed to hold the desired vacuum level. That also means the pump is whisper-quiet and generates ultra-low vibrations, and has high leak tightness. The highly flexible fabric-reinforced double FKM diaphragm is ideal for extended operating life.

The VARIO design includes the variable speed pump and the VACUU·SELECT vacuum controller with an external gauge head. The demand-responsive motor speed control on VARIO models further extends the already long lifetimes of diaphragms and valves. And oil-free operation means that there is no risk of contamination from backstreaming.

Product features

• Ultimate vacuum: 1.5 mbar
• Max. pumping speed: 50 Hz: 13.4 m3/h
• VACUU·SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory
• Extraordinary diaphragm life for minimum operational and servicing costs
• Contamination-free pumping and evacuation
• High pumping speed and excellent ultimate vacuum and TURBO·MODE for use as backing pump for turbo pumps

VARIO® chemistry pumping unit in action

These powerful pumps feature exceptionally high pumping speed. The PC 3016 NT VARIO select pumping unit is a proven solution for evaporations with large amounts of low boiling point solvents.

The integrated VACUU·SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU·SELECT controller continuously detects the boiling point and automatically adjusts the vacuum process as necessary.

With VARIO control, the pump runs only as fast as necessary. This extends the maintenance intervals and makes the pumping unit quiet. The inlet separator, made of glass with protective coating, prevents particles and liquid droplets from entering the pump. The exhaust vapor condenser provides nearly 100% recovery of solvents for economical recycling and environmental protection.

Product features

• Ultimate vacuum: 70 mbar
• Ultimate vacuum with gas ballast: 100 mbar
• Max. pumping speed 50 Hz: 19.3 m3/h
• VACUU·SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory
• Automatic boiling point detection and adjustment of the vacuum for short process times
• Suitable for evaporation of large quantities of low-boiling solvents
• Extraordinary diaphragm life for minimum operational and servicing costs
• Excellent environmental compatibility through low energy consumption and efficient solvent recovery

"VARIO® chemistry diaphragm pump in action

The ME 16C NT VARIO select pump is an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. This single stage pump provides an advantageous combination of high pumping speed and 70 mbar ultimate vacuum that make it a great choice for evaporation of large quantities of low boiling point solvents.

With pump heads constructed from chemical resistant fluoroplastics, and the proven PTFE sandwich diaphragm, our chemistry rated pumps feature unrivaled service intervals.

The integrated VACUU·SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU·SELECT controller continuously detects the boiling point and automatically adjusts the vacuum process to meet process requirements.

With VARIO control, the pump runs only as fast as is necessary. This extends the maintenance intervals and makes the pumping unit quiet.

Product features:

• Ultimate vacuum: 70 mbar
• Ultimate vacuum with gas ballast: 100 mbar
• Max. pumping speed 50 Hz 19.3 m3/h
• VACUU·SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory
• Automatic boiling point detection and adjustment of the vacuum for short process times
• Suitable for evaporation of large quantities of low-boiling solvents
• Extraordinary diaphragm life for minimum operational and servicing costs

VARIO® diaphragm pump in action

The MV 2 VARIO select is a four-stage diaphragm pump that offers continuous, oil-free pumping of non-corrosive gases at very low vacuum levels, making it suitable for a wide range of applications. It is constructed with durable materials like aluminum and stainless steel and incorporates a variable speed motor that adjusts to maintain optimal vacuum levels quietly and with minimal vibration.

The pump features a fabric-reinforced double FKM diaphragm designed for an extended operating life, and the VARIO® system includes precise vacuum control through the VACUU·SELECT controller and an external gauge. This setup ensures efficient performance and longevity of the pump components, particularly under the rigorous conditions required in physics and analytics applications where a clean, high vacuum is essential.

Product features

• Ultimate vacuum: 0.3 mbar
• Max. pumping speed 50 Hz: 3.3 m3/h
• VACUU·SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory
• automatic boiling point detection and adjustment of the vacuum for short process times
• extraordinary diaphragm life for minimum operational and servicing costs
• contamination-free pumping and evacuation
• excellent ultimate vacuum, and even better ultimate vacuum with VARIO® version in TURBO·MODE for use as backing pump for turbo pumps

VARIO® diaphragm pump in action

Designed for continuous, oil-free pumping of non-corrosive gases, this three-stage pump achieves vacuum levels as deep as 1 mbar. Crafted with aluminum, stainless steel, and carefully selected plastics, its durability ensures a wide range of applications. With whisper-quiet operation and ultra-low vibrations, the MD 4 VARIO select adapts its motor speed for precise vacuum control, while its fabric-reinforced double FKM diaphragm ensures extended life.

The VARIO design, featuring variable speed and the VACUU·SELECT vacuum controller, offers unmatched flexibility. Ideal for physics, analytics, and more, these pumps excel in contamination-free evacuation. Plus, with customized options available, meet your specific needs effortlessly. Enjoy extraordinary diaphragm life, minimum operational costs, and precise vacuum control with the VARIO® diaphragm pump.

Product features

• Ultimate vacuum: 1 mbar
• Max. pumping speed 50 Hz: 5.7 m3/h
• VACUU·SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory
• Extraordinary diaphragm life for minimum operational and servicing costs
• Contamination-free pumping and evacuation
• Excellent ultimate vacuum and TURBO·MODE for use as backing pump for turbo pumps

Economical, safe and reliable low-speed multifunction benchtop centrifuge.

Product features

• Designed for safety - the imbalance sensor identifies a rotor imbalance and stops operation to protect the user. The lid’s unique design allows it to remain open at all angles, thus preventing accidental closure.
• View or adjust speed/time during operation easily with the backlit LCD display. Lid automatically opens after the run is complete and the single-turn rotor lid allows users to access the samples fast.
• FC2706 uses a quiet, maintenance-free brushless DC motor. The centrifuge housing, chamber, and rotor buckets are constructed of corrosion-resistant stainless steel that holds up well to organic solvents.
• The Frontier FC2706 reaches a maximum speed of 6000 rpm/3660 x g in 12 sec. The five optional rotors can handle a sample range from 10 to 100mL in either round bottom or conical bottom tubes. A simple interface allows users to easily change between various functions and set up to nine programs. It's suitable for common laboratory applications, especially for extraction experiments of food, wastewater, and biological samples.

Technical data

• Maximum capacity (rotor): 6 x 100 ml
• Cooling: air cooled

The specialist for H2O pure type ASTM I

The OmniaPure-ST xs basic is the one stop solution to produce ultrapure water fulfilling highest demands of analytical and life sciences laboratories if no local water source is available for direct feedwater connection. The integrated feedwater tank for demineralized water allows a mobile production of ultrapure water even in remote locations.
The standardly integrated OptiFill dispenser is a jack-of-all-trades. It is so ergonomically shaped that it enables one-handed use, not only for system operation but also for the monitoring of all quality parameters.
Retractable and pivotable with a flexible connection for the most comfortable supply of ultrapure water to any vessel.

Features

• Reliable ASTM I ultrapure water quality
• The standardly supplied OptiFill dispenser
o enables one handed dispenser operation
o is detachable and ergonomically shaped
o can be turned and is height adjustable
• Integrated 7 l demineralized feedwater storage tank
• Spent filters are simply and quickly exchanged
• Very space saving – fits almost on an A4 sheet
• Clear view of controls with graphic display
• Leak sensor is standard
• Ready to use, including filter cartridge

Standard system components

• Compact housing with easily accessible operating and service hood that enables simple replacement of spent materials in a few seconds
• Build in feedwater tank with 7l volume for demineralized water storage
• Wide-range power supply unit with automatic voltage adjustment to 48 V that can be internationally used
• Quiet running long-life recirculation pump (< 40dB) for complete recirculation through all parts that contact media right up to the tip of the dispenser
• Ultrapure purification set for removal of inorganic substances and residual inorganic ions
• Quality rinse rinsing valve for complete disinfection of all parts that contact media as well as quality rinses in interval mode
• Multi-language microprocessor for the control and monitoring of all operating and performance parameters
• Dispenser with adapted microfiltration for sterile ultrapure water dispensing at the point-of-use

For Ranger 7000, there is one resounding theme: it offers the best of every ingenious feature that make OHAUS industrial products the right tools for your toughest weighing jobs. Ranger 7000 boasts the highest resolution, largest display, most application modes and connectivity options, as well as the largest memory library of any industrial bench scale in the OHAUS portfolio.
• Applications
Weighing, Parts Counting with Auto Optimization, Percent Weighing, Advanced Checkweighing, Animal/Dynamic Weighing, Display Hold, Filling, Formulation, Differential Weighing, Density Determination, Sieve Analysis
• Display
4.3" (109 mm) Full-color WQVGA graphic display with user-controlled brightness
• Operation
AC power (included) or rechargeable battery (accessory sold separately)
• Communication
Easy access communication port including standard USB and RS232 (included) and an optional third port of RS232 or Ethernet (accessories sold separately). GLP/GMP Data Output with Real Time Clock. Data Transfer Function.
• Construction
Modular design, die-cast housing, removable stainless steel platform, integral weigh below hook, menu lock switch, level indicator
• Design Features
Checkweighing lights with selectable operation and audible signal settings, several selectable operating languages, selectable environmental and autoprint settings, stability indicator, overload/underload indicators, selectable brightness settings, auto-dim, auto-sleep, auto tare, chain tare

With a compact design, this undercounter fits perfectly beneath your work bench, providing a storage solution that is ideal for places where space is limited.

Featuring the ETR-System™ (Extended Temperature Range) the unit can operate within -20°C to -86°C, giving you flexibility to adjust the cooling to your specific needs, or to save energy reducing both operation costs & carbon emission. The Vestfrost biomedical appliances offer a reliable solution for users seeking industry leading cooling performance and high operation stability.

Product features

• Temperature range: -20 to -86 °C
• Uniformity in performance: 1,7 / -2,6 °C
• Pull down time (from test condition to fabric setpoint): 168 Minutes
• Hold over time (from fabric SP to critical point): 102 Minutes
• Number of compressors: 1
• Material inner cabinet: Stainless steel
• Material outer cabinet: Painted steel
• Insulation type: Polyurethane with cyclopentane
• Lock
• LED light
• Battery backup
• Porthole size: 15 mm
• Dry contact
• Vacuum valve
• Alarms: High / Low temperature, Open door, Power failure, Probe failure
• Noise: 57 dB
• Refrigerant/amount: Nature R / 109g Type & gram
• Internal air distribution (Type) Static
• USB Connection
• Data connection: MODBUS
• Controller abilities: Logging of data & alarms
• Controller languages: Digits
• Log numbers: 35000

With their robust design and precise temperature control, Peltier chillers are ideal for simple temperature control tasks in laboratories and research facilities. They operate without refrigerants and are therefore very environmentally friendly. At the same time, the reliable chillers contribute to lowering operating costs and reducing the ecological footprint thanks to their energy-efficient operation.

The TE400 uses fewer movable components such as compressors for cooling. This makes it comparatively low-maintenance and less susceptible to wear. The Peltier chiller offers a cooling capacity of up to 400 watts and a pump capacity of up to 7 l/min and impresses with its high temperature stability for a wide range of different applications.

Silent Mode

The TE400 Peltier chiller is equipped with an additional operating mode for use with lower cooling power requirements. The noise level is significantly reduced in Silent Mode, contributing to a more pleasant working atmosphere.

Product features

• High temperature stability
• Environmentally friendly operation with low energy consumption
• Economical operation due to high energy efficiency and low energy consumption
• Touch display for easy operation

The VARIO® select DUO pumping units are consisting of a combination of two individual VARIO® pumping units, connected in parallel on the suction side and driven synchronously by one vacuum controller VACUU•SELECT.

The vacuum is controlled accurately. The speed of the two individual pumps is exactly adjusted to the vacuum needs. The controller allows both fully automatic distillations without any user pre-settings as well as specific and reproducible program sequences. The integration into existing control systems via digital and analog interfaces is also possible. The consequent design to highest chemical resistance provides the ideal prerequisite for universal use in chemistry and pharmacy - without any operating fluid such as water or oil.

Performance features

• automatic adaptation of the vacuum level throughout the process for high process reliability and unattended operation
• short process times due to powerful vacuum pump and accurate (hysteresis-free) vacuum control, even for large amounts of steam
• removable vacuum controller VACUU•SELECT, variable to arrange, easy to use with multilingual full-text menus, simply integratable by digital or analog interfaces
• unmatched diaphragm life with minimal operating and maintenance costs
• excellent environmental friendliness due to minimized energy consumption, no operating fluid needs (oil, water) and efficient solvent recovery

Dispenser module for 5-10 litre canisters with level indicator for the automatic dispensing of liquid media.
• Dispenser monitoring – high process security as per EN ISO 15883
• For dispensing liquid cleaning agent/neutralising agent
• 352 mm siphon for 5–10 l media canisters with flexible cap
• Siphon conversion kit for 10–30 l media canisters available

Protect your temperature sensor with this glass coat while working with aggressive liquids.

Compatible with the EKT Hei-Con, the Pt1000 temperature sensor (V4A) and the double sensor Pt1000 (V4A).

The package incudes:

• Magnetic stirrer Hei-PLATE Mix'n'Heat Ultimate. Fast and precise heating - Without overshoot - Gentle to the sample.
• The electrical lab jack e-Lift for a comfortable and secure work.