All products


% KIRSCH LABO-720 PRO-ACTIVE laboratory refrigerator This laboratory refrigerator has 5 vertically adjustable and plastic coated shelves which rest on mountings. This laboratory refrigerator can optionally be fitted with a glass door. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 5 shelves, height-adjustable • Castors. • Re-circulating air cooling • Warning in case of power failure (optical and acoustic) • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Rapid defrosting • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software • Potential free contact for alarm transmission • Low-noise compressor Options • Insulating glass door with lock • Adjustable feet to compensate for uneven floors. • Shelves on mountings or support rails • Additional drawers on telescopic runners (57x40x5,6 cm): max. 12 pieces • Additional lenght and cross dividers for drawers • Aluminium trays or baskets with support rails • LED illumination mounted at side wall • Meltwater tray for manual emptying • Cooling machine with cold water connection • Cooling machines with natural refrigerant • Outer panels in stainless steel 4301 • GSM-Modul • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Disc-type pen-recording thermometer with 7-day measuring cycle with 100 recording discs and 5 felt tip pens • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 700 l • Temperature setting (approx.): +2 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 Hz • Power consumption: 250 Watts • Average consumption: 1,46 KWh / 24 h • Overall dimensions • (incl. distance from wall): 77 x 98 x 195,5 (w x d x h in cm) • Interior dimensions: 62 x 77 x 140 (w x d x h in cm) • Overall dimensions with door • opened at 90°: 77 x 165 (w x d in cm) • Shelf dimensions: 59 x 65 (w x d in cm) • Max. loading capacity per drawer/shelf: 40 kg • Weight: 145 kg / 174 kg (net / gross)	% KIRSCH LABO-520 PRO-ACTIVE laboratory refrigerator This laboratory refrigerator has 5 vertically adjustable and plastic coated shelves which rest on mountings. The shelves can optionally rest onsupport rails. Drawers, aluminium trays and wire baskets are available as well. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • Castors • 5 shelves, height-adjustable • Re-circulating air cooling • Warning in case of power failure (optical and acoustic) • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission • Low-noise compressor • Lockable door Options • Insulating glass door with lock • Adjustable feet to compensate for uneven floors. • Shelves on mountings or support rails • Additional drawers on telescopic runners (57x40x5,6 cm): max. 12 pieces • Additional length and cross dividers for drawers • Aluminum trays or baskets with support rails • LED illumination mounted at side wall • Meltwater tray for manual emptying • Cooling machine with cold water connection • Cooling machines with natural refrigerant • Outer panels in stainless steel 4301 • GSM-Modul • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Temperature probe PT 100 or PT 1000, 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 500 l • Temperature setting (approx.): +2 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 Hz • Power consumption: 250 Watts • Average consumption: 1,40 KWh / 24 h • Overall dimensions (incl. distance from wall): 77 x 76 x 195,5 (w x d x h in cm) • Interior dimensions: 62 x 57 x 140 (w x d x h in cm) • Overall dimensions with door opened at 90°: 74 x 144 (w x d in cm) • Shelf dimensions: 59 x 45 (w x d in cm) • Max. loading capacity per drawer/shelf: 40 kg • Weight: 120 kg / 148 kg (net / gross)	% KIRSCH LABO-468 PRO-ACTIVE laboratory refrigerator This laboratory refrigerator has 4 vertically adjustable and plastic coated shelves which rest on mountings. The shelves can optionally rest on support rails. Drawers, aluminium trays and wire baskets are available as well. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 4 shelves, height-adjustable • Re-circulating air cooling • Warning in case of power failure (optical and acoustic) • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission • Low-noise compressor • Lockable door Options • Insulating glass door • Lock for glass door • Decorative frame • 60 Hz cooling machine upon request • Castors • Additional shelves on mountings or support rails • Additional drawers on telescopic runners (57x43x5,6 cm): max. 12 pieces • Additional lenght and cross dividers for drawers • Aluminium trays or baskets with support rails • LED illumination mounted at side wall • Meltwater tray for manual emptying • GSM-Module • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 460 l • Temperature setting (approx.): +2 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 Hz • Power consumption: 170 Watts • Average consumption: 1,00 KWh / 24 h • Overall dimensions (incl. distance from wall): 74 x 80 x 181 (w x d x h in cm) • Interior dimensions: 60 x 57 x 128 (w x d x h in cm) • Overall dimensions with door opened at 90°: 74 x 144 (w x d in cm) • Shelf dimensions: 59 x 50 (w x d in cm) • Max. loading capacity per drawer/shelf: 24 kg / 40 kg • Weight: 109 kg / 122 kg (net / gross)	% KIRSCH LABO-340 PRO-ACTIVE laboratory refrigerator The laboratory fridge comes with 1 drawer and 4 shelves as standard. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 4 shelves, height- adjustable • Re-circulating air cooling • Warning in case of power failure (optical and acoustic) • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission • Lockable door Options • Insulating glass door • Lock for glass door • Decorative frame • Castors • Additional s helves on mountings or telescopic runners • Additional drawers on telescopic runners: max. 10 pieces • Additional lenght and cross dividers for drawer • LED illumination mounted at side wall • Meltwater tray for manual emptying • GSM-Module • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 330 l • Temperature setting (approx.): +2 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 Hz • Power consumption: 110 Watts • Average consumption: 0,65 KWh / 24 h • Overall dimensions (incl. distance from wall): 67 x 69 x 181 (w x d x h in cm) • Interior dimensions: 53 x 45 x 128 (w x d x h in cm) • Overall dimensions with door opened at 90°: 67 x 127 (w x d in cm) • Drawer inner dimensions: 50,4 x 32 x 5,6 (w x d x h in cm) • Shelf dimensions: 53 x 39 • Max. loading capacity per drawer/shelf: 16 kg / 40 kg • Weight: 88 kg / 100 kg (net / gross)
% KIRSCH LABO-288 PRO-ACTIVE laboratory refrigerator This laboratory fridge comes with 3 shelves as standard. The refrigerator can also be equipped with power failure alarm against surcharge. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 3 shelves, height- adjustable • Re-circulating air cooling • Warning in case of power failure (optical and acoustic) • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission • Lockable door Options • Decorative frame • Glass door with lock • 60 Hz cooling machine upon request • Castors • Door fitting • Condensate container • Plastic-drawer on roller runners • Aluminium-drawer on roller runners • Stainless steel-drawer • Additional shelf on rails or overlays • Additional lenght and cross dividers for drawer • LED illumination mounted at side wall • GSM-Module • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity 280 l • Temperature setting (approx.) +2 to +15 °C • Voltage : 220 - 240 V • Frequency: 50 Hz • Power consumption: 88 Watts • Average consumption: 0,68 KWh / 24 h • Overall dimensions (incl. distance from wall): 67 x 75 x 124 (w x d x h in cm) • Interior dimensions: 53 x 50 x 100 (w x d x h in cm) • Overall dimensions with door opened at 90°: 67 x 135 (w x d in cm) • Shelf dimensions: 52 x 39 (w x d in cm) • Max. loading capacity per drawer/shelf: 40 kg • Weight: 78 kg / 85 kg (net / gross)	% KIRSCH LABO-100 PRO-ACTIVE laboratory refrigerator This laboratory refrigerator can be installed normally as well as in an undercounter installation. Door coupling fittings or decorative frames are available at an extra cost. When the device is being installed as a stand-alone unit we can optionally supply a matching tabletop. • PRO-ACTIVE- Control: • Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 2 shelves • Re-circulating air cooling • Undercounter type • Warning in case of power failure (optical and acoustic) • Automatic defrosting • Melt water evaporation • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission • Low-noise compressor (noise level I; sounds perception: whisper) • Lockable door Options • Glass door with lock • Work surface • 60 Hz cooling machine upon request • Decorative frame • Door fitting • Castors • Additional shelf or drawer • Additional length and cross dividers • Melt water tray for manual emptying • GSM-Module • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with 2 waxed paper strips • Temperature probe PT 100 or PT 1000, 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical Specifications • Capacity 95 l • Temperature setting (approx.) +2 to +15 °C • Voltage 220 - 240 V • Frequency 50 Hz • Power consumption 76 Watts • Average consumption 0,64 KWh / 24 h • Overall dimensions • (incl. distance from wall) 54 x 54 x 82 (w x d x h in cm) • Interior dimensions 44 x 43 x 47 (w x d x h in cm) • Overall dimensions with door • opened at 90° 54 x 106 (w x d in cm) • Drawer inner dimensions 40 x 32 x 5,6 (w x d x h in cm) • Shelf dimensions 43 x 36 (w x d in cm) • Max. loading capacity per drawer/shelf 13 kg / 25 kg • Weight 46 kg / 50 kg (net / gross)	% KIRSCH LABO 125 ESSENTIAL laboratory refrigerator This laboratory fridge can be installed normally as well as in an undercounter installation. Door coupling fittings or decorative frames are available at an extra cost. The temperature display can optionally be installed in the front side of an external furniture. When the device is being installed as a stand-alone unit we can supply a matching tabletop at a surcharge. Overview • 2 shelves • Undercounter type • Automatic defrosting • Melt water evaporation • Digital temperature display • Acoustic warning device • Lockable door Options • Glass door • Work surface • Decorative frame • Door fitting • Castors • Additional shelves: 43,8 x 33 cm • Additional drawers: 40,8 x 32 x 5,6 cm • Additional length and cross dividers • Digital temperature display prepared for external installation • Connecting terminal for remote alarm (potential free contact) • Melt water tray for manual emptying • GSM-Module • Compressor ventilator installed, in case built-in furniture or handling with 60Hz version • GSM-Module • Pen-recording thermometer for placing loosely inside appliance with 2 waxed paper strips • PT 100 or PT 1000 sensor for temperature recording and monitoring via EDP system Technical specifications • Capacity: 120 l • Temperature setting (approx.): +2 to +15 °C • Voltage: 220 - 240 V • Frequeny: 50 Hz • Power consumption: 125 Watts • Average consumption: 0,55 KWh / 24 h • Overall dimensions (incl. distance from wall): 54 x 53,5 x 81 (w x d x h in cm) • Interior dimensions: 44 x 42 x 67 (w x d x h in cm) • Overall dimensions with door opened at 90°: 54 x 106 (w x d in cm) • Shelf dimensions: 43 x 33 (w x d in cm) • Max. loading capacity per drawer/shelf : 13 kg / 25 kg • Weight: 42 kg / 44 kg (net / gross)	% DÜPERTHAL Type 90 Classic PRO XL safety storage cabinet with classical door handle & 2x3 pull-out shelves Optimum level of comfort for the storage of flammable chemicals with 90 minutes of fire protection • Width: 1194 mm • Depth: 612 mm • Height: 2085 mm • Weight: 460 kg • classical door technology (door handle) for the storage of flammable liquids • type testing by MPA/TÜV SÜD according to DIN EN 14470-1, DIN EN 16121 and DIN EN 16122, EK5/AK4 09-10:2009 and AfPS GS 2014: 01 PAK mark of approval: GS/CE mark, high quality mark of approval by TÜV SÜD Construction and colour: • outer carcass sheet steel, RAL 7035 • doors sheet steel, RAL 1018 • inner carcass of decor panels, RAL 7035 fittings and features: • doors close automatically in case of fire • doors remain open in every position • cylinder lock for safe access • centre partition wall • 2x 1 bottom tray sheet steel, RAL 7035 • 2x 3 pull-out shelves sheet steel, RAL 7035 • exhaust air connection socket on the cabinet roof • visual inspection of the ventilation opening • earthing connection on the cabinet roof • interior fittings conductively connected with carcass • adjustable foot for level adjustment
% DÜPERTHAL Type 90 Classic PRO XL safety storage cabinet with one-hand door handle & 2x3 pull-out shelves Optimum level of comfort for the storage of flammable chemicals with 90 minutes of fire protection • Width: 1194 mm • Depth: 612 mm • Height: 2085 mm • Weight: 467 kg • one-hand door technology (door handle) for the storage of flammable liquids • type testing by MPA/TÜV SÜD according to DIN EN 14470-1, DIN EN 16121 and DIN EN 16122, EK5/AK4 09-10:2009 and AfPS GS 2014: 01 PAK mark of approval: GS/CE mark, high quality mark of approval by TÜV SÜD Construction and colour: • outer carcass sheet steel, RAL 7035 • doors sheet steel, RAL 1018 • inner carcass of decor panels, RAL 7035 fittings and features: • doors close automatically in case of fire • doors remain open in every position • cylinder lock for safe access • centre partition wall • 2x 1 bottom tray sheet steel, RAL 7035 • 2x 3 pull-out shelves sheet steel, RAL 7035 • exhaust air connection socket on the cabinet roof • visual inspection of the ventilation opening • earthing connection on the cabinet roof • interior fittings conductively connected with carcass • adjustable foot for level adjustment	% Ohaus Frontier FC5306 Mini Centrifuge Powerful and Convenient Mini Centrifuge for Simple and Rapid Life Science Separation Applications! The OHAUS Frontier 5306 is a powerful mini centrifuge for simple and rapid liquid separation. The Frontier 5306 includes an 8-position 1.5/2 mL tube rotor as well as a 4-position 8-strip PCR tube rotor that can accommodate 32 individual PCR tubes or 0.2 mL strip tubes. With the included adapters, 0.2 mL and 0.5 mL strip tubes can also be accommodated in the 8 position tube rotor, further increasing its versatility. Frontier 5306 also has a quick release design in which the rotors can be removed and installed without the use of any tools. This centrifuge provides quiet, safe, and easy operation for your everyday quick spin-down applications. Standard Features Include: • A Quiet Motor and Rubber Base Assure Quiet Operation—With a low voltage power input, quiet motor, and rubber base that absorbs vibrati • ons, Frontier 5306 keeps operational noise to a minimum and reduces disruptions in the laboratory. • Multiple Protective Features Ensure the Safety of Centrifuge Operator—Frontier 5306 has many safety attributes, including a low voltage power input, sturdy lid, and two safety switches which immediately stop the rotors should the lid open while in rotation. An imbalance sensor also stops the centrifuge if the rotors become imbalanced or sudden shock occurs, protecting the operator from being injured by the high-speed spinning rotors. • Simple One-Step Operation—Frontier 5306 takes simple operation to a new level. Once the device is powered on, simply place your sample in the centrifuge, close the lid, and it will begin to rotate. Not even one button press is needed in order to separate your sample.	% Ohaus Frontier FC5515 Benchtop Micro Centrifuge Smooth and Dependable High-Speed Microliter Centrifuge for Liquid Separation Applications Frontier 5515 and 5515R microliter benchtop centrifuges provide high-speed operation for spin-down applications requiring a wide variety of tube volumes and capacities. With refrigeration capabilities (FC5515R), 10 acceleration/deceleration settings, multiple safety features, and an unmatched capacity, Frontier provides stable liquid separation for applications requiring high-speed operation. Standard Features Include • Easy-to-Use Control Panel that Supports Simple Operation—The intuitive control panel with rotary knob puts the centrifuge’s simple operations at your fingertips, including the ability to set and recall speed and g-force, as well as control the temperature (FC5515R only). • Sophisticated Technology that Drives High-Performance—A powerful brushless induction motor, 10 acceleration and deceleration settings, and memory for up to 99 commonly-used parameters are a few of Frontier’s features that propel high-performance. • Safety Features that Protect Against Injury—Among Frontier’s safety attributes are a motorized lid locking system and a rotor imbalance sensor that stops the centrifuge if the rotors become imbalanced or sudden shock occurs, protecting the operator from the high-speed spinning rotors. • Seven Rotor Sizes that Provide Flexibility for Varied Centrifugation Needs—Compatible with seven different rotors, more than any centrifuge in its class, the highly-versatile Frontier can be used for various applications of different volumes.	% Ohaus Frontier FC5513 Benchtop Micro Centrifuge Compact Micro Centrifuge with Modern Touch-Wheel Interface Ideal for High-Speed Lab Applications The FC5513 is a high-speed benchtop microliter centrifuge capable of generating 17,317 × g with four optional rotors, designed for a range of essential lab applications. Engineered with convenient operation in mind, the FC5513 features a uniquely designed splash-proof front panel with touchwheel control on an intuitive interface. The compact design saves valuable bench space in the lab. Standard Features • Select from a Variety of Rotors Designed for a Range of Lab Applications—The FC5513 offers standard 24 × 1.5/2 mL microtube rotors with a biocontainment option. This centrifuge can also support spin columns and hematocrit capillary tubes when used with additional rotor options. • Modern Touch-Wheel Control on a Sleek Splash-Proof Interface—Designed for ease of operation, the FC5513 features convenient control on a protective splash-proof interface, which allows for responsive operation—even when wearing gloves. • The Compact Design Saves Valuable Benchtop Space—Enclosing all its functionalities within a small footprint, the FC5513 saves valuable space on the lab bench.
% Ohaus Frontier Multi FC5707+R05 Centrifuge Frontier™ Multi Centrifuges are reliable compact low-speed general purpose centrifuges. The standard rotor options can process both round and conical bottom tubes (including common blood tubes), and can also be adapted easily with accessories to process smaller tubes. Designed with convenient operation in mind, the Multi Centrifuges feature an intuitive interface. The compact profile helps to save valuable bench space in labs. SPECIFICATIONS • Speed Range: 200 rpm ; 6,800 rpm • Maximum Relative Centrifuge Force: (x g) 4,445 g • Maximum Capacity (Rotor): 8 x 15 ml • Program memories: 99 • Rotor In Package Angle rotor: 8 x 15ml • Acceleration Gear: 10 • Deceleration Gear: 10 • Dimensions (LxHxW): 14 in x 9.3 in x 10.9 in (356 mm x 236 mm x 277 mm) • Display LCD with backlight • Lid lock Mechanical • Net Weight: 22.1 lb (10 kg) • Noise Level: ≤60±2 dB(A) • Power AC Power (Included) • Power Consumption: 50 W • Pre-cool time Not applicable • Rotor Compatibility Angle: 8X15ml • Rotor Recognition Method Manual • Running Time Continous; Quickspin; 10 sec to 99 h 59 min 59 sec • Safety Certification CE; FCC • Working Environment 36°F – 95°F, 80%RH, non-condensing (2°C – 35°C, 80%RH, non-condensing)	% Binder FED 400 drying and heating chambers with forced convection BINDER heating chambers of the FED series provide almost unlimited capacity and are particularly adaptable. With advanced timing functions and a adjustable fan, temperature and convection conditions are easily controlled. Benefits • Uniform drying conditions thanks to APT.line™ technology • Identical test conditions throughout the chamber interior independent of sample size and quantity • Outstanding thermal insulation saves operation costs Important characteristics • Temperature range: +5 °C above ambient temperature to +300 °C • APT.line™ preheating chamber technology • Adjustable fan speed • Adjustable exhaust air flap • Controller with expanded timer functions • 2 chrome-plated racks • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm • Computer interface: RS 422	% Binder FED 720 drying and heating chambers with forced convection BINDER heating chambers of the FED Avantgarde.Line series provide almost unlimited capacity and are particularly adaptable. With advanced timing functions and a controllable fan, temperature and convection conditions are easily controlled. Benefits • Best energy efficiency on the market • Excellent temporal and spatial temperature accuracy • USB connection for recording data • Temperature range up to 300 °C Important characteristics • Temperature range: +10 °C above ambient temperature to +300 °C • Up to 30% lower energy consumption compared to conventional units on the market • High temperature accuracy thanks to APT.line™ technology • Adjustable fan speed • Controller with LCD display and enhanced time functions • Electromechanical control of the exhaust air flap • 2 chrome-plated racks • Units up to 115 liters are stackable • Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm • Ergonomic handle design • Ethernet interface • USB port for recording data