All products


% Binder CBF 170 CO₂ incubator The BINDER CBF is the high-end CO2 incubator with humidity control that is suitable for all sensitive incubation applications in GMP environments. It ensures consistentresults including in cell-based assays with multiwell plates. This BINDER incubator is even suitable for complex cultivation experiments or individual environments with hypoxic conditions thanks to its comprehensive assortment of options and accessories. BENEFITS • Safe – cell cultures receive maximum protection against contamination • Reliable – constant well-being conditions for the cells • Smart – simple routine cleaning and convenient operation • Economical – efficient operation without consumables MAIN FEATURES • Contamination-safe humidification system without water pan • Tried-and-tested anti-contamination concept with 180 °C hot air sterilization • Hot-air sterilizable CO2 sensor with single-beam infrared technology • Seamless inner chamber made of stainless steel with flanges as shelf support system • Fanless interior with Venturi CO2 gas mixing nozzle • Intuitive touchscreen controller • Internal data logger, measured values can be read out in open format via USB • Troubleshooting system with visual and acoustic alarms • Interfaces: Ethernet, USB, zero-voltage alarm contact • Fail-safe CO2 system for protecting the pH of cell cultures	% DÜPERTHAL ACID LINE C pro XS safety storage cabinet For the storage of acids and lye ACID line safety storage cabinets are optimized specifically for the storage of acids and lye. The varied additional functionalities of the cabinets of the ACID line increase workplace safety and comfort. • Innovative design enables optimized air exchange. • All doors of the ACID line cabinets are separately lockable to provide access control and increase security. • Highly media-resistant safety storage cabinets for the safe storage of aggressive substances. • Pull-out trays made of polyethylene. • Scratch, impact and wear resistant inner and outer carcass constructed from 19 mm (0.75 inch) melamine-resin-coated decor panels. • The doors are generally right-hinged for one-door cabinets. A left-hung door can be delivered at no extra charge.	% Bimos Labsit 2 laboratory chair Labsit is the clever all-round solution for sitting in the most innovative environment there is: the laboratory. • Boasting a hygienic design • Compact dimensions • Ergonomic construction and user comfort • Large range of colours • Robust and light • Anti-bacterial upholstery • Minimal joints and positive-locking • Intuitive handling • Innovative Flex functions • Resistant to disinfectants • Electrostatically dissipative (optional) • Very economical • 10 year guarantee – including on gas pressure springs	% Bimos Unitec 1 Industrial swivel chair Work chairs in production • The Unitec work chair is the low-cost entry-level model for correct sitting in production environments. • Its permanent contact backrest, a standard feature, provides staff with support when working in a seated position. • The generous seating surfaces and backrests also ensure additional stabiliuty. • With its selection of various covers, Unitec optically adapts to almost any working environment. This makes it a simple work chair for practically any application.
% Binder WIC 2 Walk-in-Chamber The Binder Environmental Walk-in Chambers with either 6 m², 9 m² or 12 m² internal dimensions and 2,3 m height are an excellent choice for stability testing in Pharma, Food & Beverage, Cosmetics, Material Testing and many other fields of application. In Pharma, the Binder Walk-in Chambers cover long-term and accelerated stability test conditions as specified in the ICH Q1A (R2) for new drug substances and drug products. The walk-in chambers are designed and produced in Germany, and the temperature and environmental conditioners are made by Parameter Generation and Control in Black Mountain, NC USA. The chambers offer a wide range of features and benefits to perfectly meet requirements in stability testing. Product features • Long-term and accelerated stability tests according to the guidelines of ICH Q1R (R2) • Temperature accuracy: ± 1.5°C • Humidity accuracy: ± 2.5% RH • High-efficiency insulation panels with a U-value of 0.21 W/m2K • Motion sensor LED lighting • Entire inner chamber made of stainless steel • External service access to the conditioning unit • Safety lockable door, which can always be opened from the inside • Environmentally friendly refrigerant R450A • Power supply: 230V / 50Hz, 11.5A • Available accessories: shelving system, ramp	% Miele A 101 upper basket Height adjustable, for the optimum loading of inserts. • Area of application: reprocessing laboratory glassware and different utensils • Vertical clearance 160 +/- 30 mm, width 475 mm, depth 443 mm • With integrated spray arm Machine affiliation: Can be used in PG 8504, PG 8583, PG 8583 CD, PG 8593 devices.	% Miele A 12/2 insert for the gentle cleaning of delicate load items by interrupting the water jet Insert for the gentle cleaning of delicate load items by interrupting the water jet. • With perforations 7 x 7 mm • For use in upper and lower basket	% Binder CBF 260 CO₂ incubator The BINDER CBF is the high-end CO2 incubator with humidity control that is suitable for all sensitive incubation applications in GMP environments. It ensures consistent results including in cell-based assays with multiwell plates. This BINDER incubator is even suitable for complex cultivation experiments or individual environments with hypoxic conditions thanks to its comprehensive assortment of options and accessories. BENEFITS • Safe – cell cultures receive maximum protection against contamination • Reliable – constant well-being conditions for the cells • Smart – simple routine cleaning and convenient operation • Economical – efficient operation without consumables MAIN FEATURES • Contamination-safe humidification system without water pan • Tried-and-tested anti-contamination concept with 180 °C hot air sterilization • Hot-air sterilizable CO2 sensor with single-beam infrared technology • Seamless inner chamber made of stainless steel with flanges as shelf support system • Fanless interior with Venturi CO2 gas mixing nozzle • Intuitive touchscreen controller • Internal data logger, measured values can be read out in open format via USB • Troubleshooting system with visual and acoustic alarms • Interfaces: Ethernet, USB, zero-voltage alarm contact • Fail-safe CO2 system for protecting the pH of cell cultures
% DÜPERTHAL ACID LINE C pro S safety storage cabinet For the storage of acids and lye ACID line safety storage cabinets are optimized specifically for the storage of acids and lye. The varied additional functionalities of the cabinets of the ACID line increase workplace safety and comfort. • Innovative design enables optimized air exchange. • All doors of the ACID line cabinets are separately lockable to provide access control and increase security. • Highly media-resistant safety storage cabinets for the safe storage of aggressive substances. • Pull-out trays made of polyethylene. • Scratch, impact and wear resistant inner and outer carcass constructed from 19 mm (0.75 inch) melamine-resin-coated decor panels. • The doors are generally right-hinged for one-door cabinets. A left-hung door can be delivered at no extra charge.	% Bimos Labsit 3 laboratory chair Labsit is the clever all-round solution for sitting in the most innovative environment there is: the laboratory. • Boasting a hygienic design • Compact dimensions • Ergonomic construction and user comfort • Large range of colours • Robust and light • Anti-bacterial upholstery • Minimal joints and positive-locking • Intuitive handling • Innovative Flex functions • Resistant to disinfectants • Electrostatically dissipative (optional) • Very economical • 10 year guarantee – including on gas pressure springs	% Bimos Unitec 2 Industrial swivel chair Work chairs in production • The Unitec work chair is the low-cost entry-level model for correct sitting in production environments. • Its permanent contact backrest, a standard feature, provides staff with support when working in a seated position. • The generous seating surfaces and backrests also ensure additional stabiliuty. • With its selection of various covers, Unitec optically adapts to almost any working environment. This makes it a simple work chair for practically any application.	% Binder WIC 3 Walk-in-Chamber The Binder Environmental Walk-in Chambers with either 6 m², 9 m² or 12 m² internal dimensions and 2,3 m height are an excellent choice for stability testing in Pharma, Food & Beverage, Cosmetics, Material Testing and many other fields of application. In Pharma, the Binder Walk-in Chambers cover long-term and accelerated stability test conditions as specified in the ICH Q1A (R2) for new drug substances and drug products. The walk-in chambers are designed and produced in Germany, and the temperature and environmental conditioners are made by Parameter Generation and Control in Black Mountain, NC USA. The chambers offer a wide range of features and benefits to perfectly meet requirements in stability testing. Product features • Long-term and accelerated stability tests according to the guidelines of ICH Q1R (R2) • Temperature accuracy: ± 1.5°C • Humidity accuracy: ± 2.5% RH • High-efficiency insulation panels with a U-value of 0.21 W/m2K • Motion sensor LED lighting • Entire inner chamber made of stainless steel • External service access to the conditioning unit • Safety lockable door, which can always be opened from the inside • Environmentally friendly refrigerant R450A • Power supply: 230V / 50Hz, 11.5A • Available accessories: shelving system, ramp
% Miele A 102 upper basket Height adjustable, for the optimum loading of inserts. • Area of application: reprocessing laboratory glassware • Vertical clearance 205 +/- 30 mm, width 475 mm, depth 443 mm • With integrated spray arm Machine affiliation: Can be used in PG 8504, PG 8583, PG 8583 CD, PG 8593 devices.	% Bimos Labsit 4 laboratory chair Labsit is the clever all-round solution for sitting in the most innovative environment there is: the laboratory. • Boasting a hygienic design • Compact dimensions • Ergonomic construction and user comfort • Large range of colours • Robust and light • Anti-bacterial upholstery • Minimal joints and positive-locking • Intuitive handling • Innovative Flex functions • Resistant to disinfectants • Electrostatically dissipative (optional) • Very economical • 10 year guarantee – including on gas pressure springs	% Bimos Unitec 3 Industrial swivel chair Work chairs in production • The Unitec work chair is the low-cost entry-level model for correct sitting in production environments. • Its permanent contact backrest, a standard feature, provides staff with support when working in a seated position. • The generous seating surfaces and backrests also ensure additional stabiliuty. • With its selection of various covers, Unitec optically adapts to almost any working environment. This makes it a simple work chair for practically any application.	% Liebherr SFFvh 4001 laboratory freezer Liebherr freezers for laboratory and research use meet the highest requirements, especially in terms of safety and temperature stability. • Integrated data logger The integrated logger records the temperature profile, alarm history and service information for up to five years. The data can be read out directly from the appliance via the USB interface. • Min./max. temperature log The min./max. temperature log stores the minimum and maximum interior temperatures and shows on the display whether the storage temperatures were within the tolerance limits. • +2 °C SafetyDevice If the temperature falls below +2 °C due to a malfunction, the SafetyDevice takes control, stabilising the temperature, activating the alarm and protecting the contents from freezing • Power failure alarm If a malfunction occurs, an integrated battery provides a visual and audible alarm and takes over the power supply. As soon as the power is restored, the time of failure and the maximum temperature reached are displayed. • LightAlarm In the event of an uncontrolled temperature rise or other problems, the interior light of the appliance starts flashing. This visually shows when action is needed. • Feedthrough for external sensors An integrated opening allows a separate sensor to be connected for additional temperature monitoring without having to drill holes or break the door seal. • Mechanical lock Liebherr professional appliances are equipped with a mechanical lock and two keys. This ensures that unauthorised persons cannot access your valuable and sensitive stored goods. • SmartMonitoring The cloud-based digital solution continuously monitors and documents temperatures and alerts you immediately via email, text message or phone if any deviations occur. • Integrated WiFi/LAN interface The integrated WiFi/LAN interface enables you to easily connect your appliances with Liebherr SmartMonitoring or existing local systems. • Easy-to-clean interior The inner liner made of fully recyclable, robust and odourless polystyrene is manufactured in one piece without joints. This makes it quick and easy to clean the large, rounded corners. • Replaceable door seal Save time and money: the insertable Liebherr door seals are easy to change. If a seal is damaged, you can replace it yourself without any tools. Contact Liebherr Customer Service to purchase replacements. • Self-closing door < 90° To make loading, unloading and cleaning easier, the appliance door stays open if opened by more than 90°. If the opening angle is less than 90°, it closes automatically for safety • NoFrost technology Liebherr professional laboratory appliances no longer need manual defrosting. Any moisture that occurs is bound by the fan-assisted cooling, and when necessary, defrosting phases remove any remaining moisture particles from of the interior – for convenient, safe, and ice-free storage. • ±5 °C temperature stability Sensitive substances cannot be subjected to large deviations from the set storage temperature. Liebherr freezers guarantee a temperature fluctuation of no more than ±5 °C, so that the valuable goods you store in them are optimally protected and their quality is preserved. • Standard compliance The devices fully comply with the DIN 13277 standard and the IEC 61010-2-011 standard.
% Binder M 56 drying and heating chamber with forced convection and advanced program functions With a maximum of +300 °C and various programming options the M series material test chambers are ideal for material and aging tests. With a high air flow, the powerful fans ensure rapid heating. BENEFITS • Uniform drying conditions thanks to APT.line™ technology • Identical test conditions throughout the chamber interior independent of sample size and quantity • Outstanding thermal insulation saves operation costs • Advanced programming options IMPORTANT CHARACTERISTICS Temperature range: +22°C above ambient temperature to +300°C High temperature accuracy thanks to APT.line™ technology with increased heating output Reinforced fan with adjustable speed Electromechanical control of the exhaust air flap Intuitive touchscreen controller with time-segment and real-time programming 2 chrome-plated racks Class 2 independent adjustable temperature safety device (DIN 12880) and class 3.1 independent temperature safety device (DIN 12880) with visual/ acoustic alarm available for selection on the controller Failsafe function – backup sensor Pt 100 Computer interface: Ethernet Internal data logger, measured values can be read out in open format via USB	% Binder FP 53 drying and heating chamber with forced convection and program functions A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and particularly fast heating – even for chambers under full loads. Product benefits • Uniform drying conditions thanks to APT.line™ technology • Identical test conditions throughout the chamber interior independent of sample size and quantity • Outstanding thermal insulation saves operation costs • Advanced programming options Main features • Temperature range: +10 °C above ambient temperature up to +300 °C • High temperature accuracy thanks to APT.line™ technology • Adjustable fan speed • Controller with interval and real-time programming • Electromechanical control of the exhaust air flap • 2 chrome-plated racks • Units up to 115 liters are stackable • Class 2 independent adjustable temperature safety device (DIN 12880) and class 3.1 independent temperature safety device (DIN 12880) with visual/acoustic alarm available for selection on the controller • Ergonomic handle design • Computer interface: Ethernet • Internal data logger, measured values can be read out in open format via USB	% DÜPERTHAL COOL LINE Type 90 XL Standard Safety cabinet with integrated refrigerator Safety cabinet with built-in refrigerator • Efficient cooling: The cooling compartment has its own door for efficient and economical cooling. • Refrigerator door is opened/closed separately • Refrigerant: R 600a • Maximum fire protection: Maximum safety with Type 90 technology and cooled interior. • Interior of refrigerator explosion protected Ex II 3G, Ex nA II T6,SNCH 07, ATEX 0124 X. • Self-closing in the event of fire: In case of fire, a thermocouple automatically initiates the uninterrupted closing of the doors. The closure control system ensures that the refrigerator is also self-closing. • Continuous temperature control: the temperature can be adjusted continuously from +1 degrees °C to +15 degrees °C • Constant temperatures: The integrated fan ensures stable temperatures. • Heat energy: Heat energy is extracted via the ventilation openings and the exhaust air (connection) sockets. The air flow is monitored and if the ventilation fails, the refrigerator is automatically switched off. This is done using an ex- haust air monitoring unit for emitting warning signals, which is also available with a ventilator. • Outer dimensions: 895 x 745 x 2080 (WxDxH) mm • Inner dimensions: 550 x 430 x 1400 (WxDxH) mm • Voltage: 230 V / 50 Hz Inner fittings: • 5 shelves made from shatterpoof glass • 1 bottom tray: The easily removable bottom tray can be cleaned and discharged without effort. • 1 perforated sheet insert made of powder-coated sheet steel.	% Hei-PLATE Mix'n'Heat Expert magnetic stirrer with heating Well-designed features for a carefree stirring and heating. The magnetic stirrer Hei-PLATE Mix 'n' Heat Expert convinces with its intuitive handling: Thanks to respectively one display per main function (stirring and heating), you have an easily legible eye on all values and settings at any time. The handling is made via two push-and-rotary controls with LED-rings for an easy identification of the active functions. Separate timers for heating and stirring functions create flexibility and let you control your experiments better. The user-friendly menu navigation makes working with this device particularly easy. For controlling the temperature, you can choose between three heating modes: FAST for a particularly quick heating, as well as PRECISE and PRECISE+ for a particularly exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 as well as the double sensor Pt1000 that allows the measurement in your sample and in the bath liquid simultaneously. For the stirring speed, there is a three-stage setting (start-up behavior). Furthermore, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. As a result, your sample is optimally stirred at any time, even when there are irregularities while stirring. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures > 50 °C, protect against burns. The patented Kera-Disk® plate made of anodized aluminum is chemical-resistant, scratch-resistant and has a diameter of 145 mm (also available with 135 mm on request). This makes it suitable for the use with many accessories and samples on a small footprint. Moreover, the material used allows the fastest heating times. Technical data • Dimensions (w/d/h): 168 x 299 x 106 mm • Usable Surface heating plate: 145 mm • Weight: 3 kg • Max. Load: 25 kg • Drive: EC motor, counterclockwise/clockwise rotating • Rotation speed range: 100 – 1,400 rpm • Heating power: 800 W at 230 V (EU) 600 W at 115 V (US) • Temperature range: 20 – 350 °C, setting accuracy 1 K • Heating control: PID • Temperature measurement accuracy: Operation with external temperature measuring sensor Pt1000: ± 0.2 K, plus tolerance Pt1000 • Temperature measurement resolution: 0,1 K • Display: 2 x TFT display • Protection class (EN 60529): IP 42 • Acoustic pressure: < 50 db(A) • Rated Voltage: 230 V, 50/60 Hz (EU) 115 V, 50/60 Hz (US) • Connection: L+N+PE • Protection class IEC 60529: I • Overvoltage Category: II • Degree of pollution: 2 • Power input: Normal operation 230 V: 825 W (EU) / 115 V: 625 W (US) Standby mode: 1.7 W • EMC class: B, Group 1 • Permissible ambient conditions: 5 – 31 °C at up to 80 % rel. humidity, 32 – 40 °C at up to 50 % rel. humidity (linearly reducing) • Installation altitude: up to 2,000 m asl