All products

Tray with fixed clamps E-25 To load 81 Erlenmayer flasks with a volume of 25 ml

Kuhner Kelvin+ can be placed on, or under, any table or lab bench. The incubator has a flat front and a space-saving door mechanism. The large window provides a good view of cultivation vessels. For static experiments, a fixed shelf may be placed above the shaking tray inside the chamber. The 40 mm feedthrough port provides enough space for tubing and cables needed for the cultivation process. An exterior side-mounted document holder adds convenience to the Kuhner Kelvin+.
The stainless-steel chamber of the Kuhner Kelvin+ is easily cleaned.
Technical data Kuhner Kelvin+
• Temperature distribution: +/- 0.5°C (at 37°C, 100 rpm)
• Principle of sensor: Pt-100
• Air circulation: 190 m3/h
• Illumination: LED
• Ambient temperature: 10 up to 35°C
• Operating menu in: DE, FR, EN, IT, ES
• Interface standard: CAN-Bus
• Tray, size: E (420 x 420mm)
• Control accuracy, absolute: <+/- 0.3°C
• Material: inner chamber stainless steel, outer chamber PUR (insulation), door polycarbonate

Recirculation cooler for high-performance rotary evaporators
• Filling opening at the top, drain tap at the rear
• Integrated programmer with 150 segments, can be divided into 5 programs
• Electronic level indicator and low-level alarm
• SmartCool system for digital, energy-saving cooling control, including automatic compressor control
• Clearly arranged control elements, large TFT display and membrane keypad
• USB interface and an alarm contact are integrated as standard features
• Temperature range: -20...+40 °C
• Cooling capacity at +20 °C (20 °C ambient temp.): 3000 W
• Pump pressure max.: 2 bar
• Pump flow max.: 20 l/min
• Thermal fluid fill volume: 20 – 33 l
• Dimensions (w/d/h): 550 x 650 x 970 mm

Three-stage chemical-resistant diaphragm vacuum pump
• Includes secondary condenser and air intake separation vessel
• This vacuum system can be applied in many different fields in order to evacuate, evaporate and pump out gases and vapors. Thanks to the emission condenser it is possible to achieve a chemical recovery of almost 100%
• Excellent compatibility with chemicals and condensate
• Very quiet and very low vibration

Chemically resistant membrane pump for Hei-VAP Expert Control and Hei-VAP Ultimate Control devices. The vacuum can be controlled by changing the speed of the pump, enabling constant distillation conditions and shorter operation times.
• Even if the gas ballast valve is open an excellent ultimate vacuum is reached when working with easily condensable vapors. This makes distilling high boiling point solvents such as DMF or DMSO possible at low bath temperatures.
• Condenser is not in scope of delivery

Chemically resistant membrane pump for all Hei-VAP models.
• Suction capacity for up to three rotary evaporators at the same time
• Vacuum can be controlled via valve operated or manual vacuum controllers
• Depending on your application you can switch on and off the vacuum pump via switchbox
• A Vacuum valve is necessary, if you want to combine this vacuum pump with the Hei-VAP Expert Control / Hei-VAP Ultimate Control rotary evaporators
• Condenser is not in scope of delivery

Thanks to thermoelectric cooling technology with patented heat dissipation, the new KBF-S ECO climatic chamber is one of the most energy-efficient constant climate chambers on the market. The thermoelectric cooling technology means the KBF-S ECO series is also very quiet during operation.
Benefits
• Safe thanks to standard-compliant testing according to the ICH Q1A guideline, even with full load.
• Reliable thanks to failsafe operation without compromise.
• Smart, as a wide range of accessories makes it highly compatible for adaptation to specific customer requirements.
• Economical, as energy consumption is minimal thanks to optimized thermoelectric cooling.
Main features
• Temperature range: 0 °C to +70 °C (max. 24 °C under ambient temperature)
• Unit self-test for comprehensive status analysis
• Inner chamber made completely of stainless steel
• Humidity range: 10% to 80% RH
• APT.line™ preheating chamber technology
• Independent water supply via tank
• LCD to display temperature and humidity along with additional information and alarms
• Internal data logger, measured values can be read out in open format via USB

Storage tanks in grey PP for storing purified water from reverse osmosis systems. Closed and opaque design, round, including manhole for cleaning. The tank comes completely piped and is available with optional accessories.
• Input connection: R ¾''
• Drain connection: R 1¼''
• Volume (l): 100
• Dimensions (Ø x height, mm): 470 x 680
• Net weight (kg): 12

Completely automatic water softening unit with Mix Multi filter material, for softening of iron and manganic free drinking water and removal of organics, for bad water qualities and well water application that produces softened water with a residual hardness of 0.1° dH by means of the neutral exchange process with strong acid cation exchanger. Common salt is used for regeneration. Regeneration is carried out volume-dependently. Manual initiation of regeneration is also possible.
Scope of delivery:
• Fiberglass pressure tank and filling with cation exchanger
• Central control valve with 5 step regeneration program
• Container for dissolving salt
• Pre-assembled system ready for connection
Technical data:
• Capacity: (at 10°dH - tap water) 32 m³x°dH
• Flow rate: 0,32 m³/h
• Resin volume: 8 liter
• Capacity of salt container: 25 kg
• Salt consumption: 1,92 kg/reg.
• Water consumption: 0,08 m³/reg.
• Operating pressure: 2 to 6 bar
• Max. water temperature: 30°C
• Max. ambient temperature: 5 to 40°C
• Power supply: 220 V 50 Hz
• Dimensions: W 310 x D 430 x H 660 mm
• Piping connections: R1“

One way mixed bed ion exchange resin for polishing process water to achieve demineralized water quality.

Stakpure DS ion exchange cartridge - stainless-steel, pressure-resistant to 10 bar
For any situation requiring up to 300 litres of demineralised water an hour. A sophisticated flow system for incoming water ensures a fast and effective flow of water through the mixed-bed system with ion-exchange resins.
• Flow rate: 300 l/h
• Capacity for 10° total dissolved solids: 1500 l
• Pure water quality: 0,1 - 20 μS/cm
• Max. water temperature: 30 °C
• Material: stainless steel – AISI 316
• Dimensions mm (Ø x height): 240 x 410
• Connection: R ¾ "
• Weight, approx.: 14 kg

Heat-resistant gloves for protection of the operator when loading or removing hot materials

Fiberboard boxes have the dimension of 130 x 130 x 50 mm (5.25’’ x 5.25’’ x 2’’).
Dividers have to be ordered separately.

Frontier rotors extend the functionality of Frontier centrifuges by increasing the number of tubes of varied types and sizes that can be used in conjunction with each of the centrifuge models. Easy to clean and operate, the rotors are durably constructed to withstand demanding centrifugation.

Compatible adapters and other accessories:
• Adapter, D6mm, 0.2/0.4ml Tubes x6 (30130884); Adapter, D8mm, 0.5ml Tubes x6 (30130885)

Hei‐PLATE Mix'n'Heat Core+ and Pt 1000 (V4A)

Includes: Magnetic stirrer Hei-PLATE Mix 'n' Heat Core+ (145 mm diameter) - Fast and precise heating - Without overshoot - For sample-friendly work and Pt1000 temperature sensor for precise temperature regulation. The magnetic stirrer Hei-PLATE Mix 'n' Heat Core+ offers you a digital display for setting your desired temperature to the degree. This precise temperature without overshooting is controlled by two selectable heating modes (FAST/PRECISE) and the optional external temperature sensor Pt1000.

It convinces with its robust design and its sophisticated functionalities, such as its key and knob illumination, which provides information about active functions at any time. The dynamic rotary knobs respond to turning speed - slow for precise adjustments, or fast for bigger jumps. The locking function protects against accidental changing of the values. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures > 50 °C, protect against burns. A carrying aid on the underside ensures safe transport.

• Circular scratch-resistant, chemical-resistant mixing plate with Kera-Disk coating
• Plate diameter ø: 145 mm
• Temperature range: 20 – 300 °C
• Heating power: 800 W
• Rotation speed range: 100… 1400 rpm
• Accuracy temperature setting: ± 1 K
• Speed accuracy: ± 2 %
• Max. stirring capacity (H₂O): 20 l
• The appliance has a residual heat indication
• Maximum load: 25 kg
• Protection class IEC 60529: IP 42
• Also available with 135 mm plate on request

The speed and temperature are set using a scale. This magnetic stirrer is very easy to use and is equipped with the most important safety features. The large safety distance between the heating plate and the control elements, as well as the optical residual heat indicator at temperatures > 50 °C, protect against burns. A carrying aid on the underside ensures safe transport. The heating function can be activated separately and is indicated by the LED button lighting up.
• Circular scratch-resistant, chemical-resistant mixing plate with Kera-Disk coating
• Plate diameter ø: 145 mm
• Temperature range: 20 – 300 °C
• Heating power: 800 W
• Rotation speed range: 100… 1400 rpm
• Speed accuracy: ± 2 %
• Max. stirring capacity (H₂O): 20 l
• The appliance has a residual heat indication
• Maximum load: 25 kg
• Protection class IEC 60529: IP 42

Base, rollable 1.150 mm wide ready, with bottom tray, floor drain. established connection without.
• Can be used for 1-door appliances with a width of 1.150 mm
• Running wheels for pulling the equipment forward, in case of servicing
• Can only be used for appliances with a drain valve
• Easy access for servicing

Machine affiliation: Can be used for PLW 8617 devices.

Mobile unit for optimum loading of laboratory glassware on upper levels.
• Area of application: reprocessing laboratory glassware
• Equipped with 1 integrated spray arm
• For holding inserts
• Clearance: 484 x 525 mm

Machine affiliation: Can be used for PLW 6111 devices.

Injector nozzle with plastic supports, Ø 3, length 90 mm.
• Area of application: reprocessing laboratory glassware
• Suitable for measuring flasks and test tubes, for example
• Suitable for standard mobile injector units and injector baskets

Machine affiliation: Can be used for PG 8583, PG 8583 CD, PG 8593 devices.

For measuring the conductivity level and the display for changing the cartridge.
• Suitable for full demineralisation cartridges
• Optical and acoustic display for cartridge change
• 10 switch points in measuring range 0 - 199.9 µS/cm
• One-line display, connection to external LED possible
• Including wall bracket and power unit (Input: 110 - 240 V, 50/60 Hz, 85 mA)

Machine affiliation: Can be used for PG 8583, PG 8583 CD, PG 8593 devices.