All products

For Single- and Multi-Channel use (not suitable with cassette small)
• Application: Especially for hydrocarbons, mineral oil products and distillates
Features:
• Ideal for petrol, kerosene, heating oil, cutting solutions and coolants on a glycol base
• Resistant to ozone and UV
• Material: Thermoplastic soft PVC, translucent yellow
• Complies with the standards: GLP conform
• Temperature range: -40 to +75 °C
• Sterilization: Sterilization is not recommended
• Restriction: Not suitable for concentrated acids, lyes, food and pharmaceutics

The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability.

Standard Equipment
• Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity
• Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C
• Thermocouple type S (1200 °C)
• Ceramic heating plates with integral heating element which is safeguarded and easy to replace
• With lift door (LT)
• Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
• Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
• Adjustable air inlet integrated in door (see illustration)
• Exhaust air outlet in rear wall of furnace
• Controller with touch operation C550
• Solid state relays provide for lownoise operation

Option
• Chimney, chimney with fan or catalytic converter (not for L 1 and L 15)
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight
• Manual or automatic gas supply system
• Port for thermocouple in the rear wall or in the furnace door

• ATEX-compliant CE Ex II (3) [c IIB T4], zone 2 in the air flow
• Consisting of: Cage made of sheet steel in silver with sparkling effect
• Integrated, modern LED-Display "Blue Mode"
• Plug-in access to the 230V / 50 Hz power supply via IEC-60320 C13 appliance-side connector
• AC ventilator integrated
• Optical and acoustic warning in case of errors
• Two floating contacts (max. 24V/2A)
• Noise level Lp5A 34 - 56 dB (A)
• Monitoring of the air flow and power supply
• Internal storage accumulator supplies the monitoring systems for 4 hours in the event of a power failure, display with basic error scale
• Last 50 alarm messages will be saved
• Air stream flow rate adjustable
• Low noise
• Outer dimensions (height x width x depth): 275x255x310 mm
• Net weight: 15 kg

Tray with fixed clamps F-2500U to load 8 Ultra yield flasks with a volume of 2500 ml on a F-tray

Diaphragm pumps are an excellent solution for continuous, oil-free evacuation and pumping of gases. All parts in these MZ 2 series pumps that are in contact with pumped media are made of aluminum, stainless steel and selected plastics, allowing a wide range of applications for non-corrosive gases. The two-stage construction provides the advantageous combination of high pumping speed and an ultimate vacuum down to 4 mbar. The highly flexible fabric-reinforced double diaphragms made of FKM provide high reliability and extended operating life. The NT-series features further improved performance data and compact design.

Performance features
• contamination-free pumping and evacuation
• high flow rate even near ultimate vacuum
• good ultimate vacuum
• whisper quiet and very low vibration
• exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs

• ATEX-compliant CE Ex II (3) [c llB T4], zone 2 in the air flow
• Plug-in access to the 230V / 50 Hz power supply via IEC-60320 C13 appliance-side connector
• Consisting of: sheet steel air box, in silver with sparkling effect
• Exhaust ventilator type 2.00.176-1
• Noise level Lp5A 56 db (A)
• Outer dimensions (height x width x depth): 500x370x500 mm
• Net weight: 9 kg

• ATEX-compliant CE Ex II (3) G [nT4], zone 2 in the air flow PTB-Nr. 14 ATEX D027
• Consisting of: Casing made of sheet steel in silver pearl glimmer
• Integrated LED error display
• Ready to plug in connection for the 230V / 50 Hz power supply via CEE 7/7 plug
• Integrated ventilator
• Exchangeable activated carbon filter (2 kg filling)
• Exchangeable particlel filter acc. to DIN EN 779
• Filter capacity (activated carbon): 30% of filling for all substances on the included hazardous substances list
• Optical and acoustic warning in event of errors
• One floating contact (max. 24V/2A)
• Functions: Monitoring of the air flow
• Monitoring of the filter exchange interval (electronically coded)
• Low noise ventilation
• Outer dimensions (height x width x depth): 310x415x460 mm
• Net weight: 16.5 kg

For Single- and Multi-Channel use (not suitable with cassette small)
• Application: Especially for hydrocarbons, mineral oil products and distillates
Features:
• Ideal for petrol, kerosene, heating oil, cutting solutions and coolants on a glycol base
• Resistant to ozone and UV
• Material: Thermoplastic soft PVC, translucent yellow
• Complies with the standards: GLP conform
• Temperature range: -40 to +75 °C
• Sterilization: Sterilization is not recommended
• Restriction: Not suitable for concentrated acids, lyes, food and pharmaceutics

The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability.

Standard Equipment
• Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity
• Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C
• Thermocouple type N (1100 °C)
• Ceramic heating plates with integral heating element which is safeguarded and easy to replace
• With flap door (L)
• Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
• Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
• Adjustable air inlet integrated in door (see illustration)
• Exhaust air outlet in rear wall of furnace
• Controller with touch operation B510 (5 programs with each 4 segments)
• Solid state relays provide for lownoise operation

Option
• Chimney, chimney with fan or catalytic converter (not for L 1 and L 15)
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight
• Manual or automatic gas supply system
• Port for thermocouple in the rear wall or in the furnace door

Tray with fixed clamps F-3000 For 8 Erlenmeyer flasks with 3000 ml volume

For Single- and Multi-Channel use (not suitable with cassette small)
• Application: Especially for hydrocarbons, mineral oil products and distillates
Features:
• Ideal for petrol, kerosene, heating oil, cutting solutions and coolants on a glycol base
• Resistant to ozone and UV
• Material: Thermoplastic soft PVC, translucent yellow
• Complies with the standards: GLP conform
• Temperature range: -40 to +75 °C
• Sterilization: Sterilization is not recommended
• Restriction: Not suitable for concentrated acids, lyes, food and pharmaceutics

Description
These three-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of non-corrosive gases. They reach an excellent ultimate vacuum of 1 mbar. All parts in contact with pumped gases and vapors are made of aluminum, stainless steel and carefully selected plastics suitable for a wide range of applications with non-corrosive gases. The new NT-series provides whisper quiet and ultra-low vibration operation, high leak tightness and improved performance. The highly flexible fabric-reinforced double diaphragm made of FKM is ideal for extended operating life.

Performance features
contamination-free pumping and evacuation
high flow rate even near ultimate vacuum
whisper quiet
very low vibration
exceptionally long diaphragm life and maintenance-free drive system for low lifetime cost

For Single- and Multi-Channel use (not suitable for use with Cassette small)
• Application: Food industry, well suited to products with high fat content
Features:
• Extremely chemical-resistant | e. g. appropriate for the use of
• polar solvents
• Plasticizer and oil-free
• Superior flex life in peristaltic pumps
• Translucent to ease visual inspection
• Outstanding flexibility
• Material: Thermoplastic tube, transparent
• Complies with the standards: USP Class VI, FDA (21 CFR 177.2600) and GLP
• Temperature range: -78 to +71 °C
• Sterilization: Can be autoclaved for 30 min at 1 bar, sterilized by irradiation or with ethylene oxide

The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability.

Standard Equipment
• Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity
• Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C
• Thermocouple type N (1100 °C)
• Ceramic heating plates with integral heating element which is safeguarded and easy to replace
• With flap door (L)
• Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
• Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
• Adjustable air inlet integrated in door (see illustration)
• Exhaust air outlet in rear wall of furnace
• Controller with touch operation C550
• Solid state relays provide for lownoise operation

Option
• Chimney, chimney with fan or catalytic converter (not for L 1 and L 15)
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight
• Manual or automatic gas supply system
• Port for thermocouple in the rear wall or in the furnace door

Designed for continuous, oil-free pumping of non-corrosive gases, this three-stage pump achieves vacuum levels as deep as 1 mbar. Crafted with aluminum, stainless steel, and carefully selected plastics, its durability ensures a wide range of applications. With whisper-quiet operation and ultra-low vibrations, the MD 4 VARIO select adapts its motor speed for precise vacuum control, while its fabric-reinforced double FKM diaphragm ensures extended life.

The VARIO design, featuring variable speed and the VACUU·SELECT vacuum controller, offers unmatched flexibility. Ideal for physics, analytics, and more, these pumps excel in contamination-free evacuation. Plus, with customized options available, meet your specific needs effortlessly. Enjoy extraordinary diaphragm life, minimum operational costs, and precise vacuum control with the VARIO® diaphragm pump.

Product features

• VACUU·SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory
• Extraordinary diaphragm life for minimum operational and servicing costs
• Contamination-free pumping and evacuation
• Excellent ultimate vacuum and TURBO·MODE for use as backing pump for turbo pumps

Tray with fixed clamps F-4000 For 5 Erlenmeyer flasks with 4000 ml volume

For Single- and Multi-Channel use (not suitable for use with Cassette small)
• Application: Food industry, well suited to products with high fat content
Features:
• Extremely chemical-resistant | e. g. appropriate for the use of
• polar solvents
• Plasticizer and oil-free
• Superior flex life in peristaltic pumps
• Translucent to ease visual inspection
• Outstanding flexibility
• Material: Thermoplastic tube, transparent
• Complies with the standards: USP Class VI, FDA (21 CFR 177.2600) and GLP
• Temperature range: -78 to +71 °C
• Sterilization: Can be autoclaved for 30 min at 1 bar, sterilized by irradiation or with ethylene oxide

For Single- and Multi-Channel use (not suitable for use with Cassette small)
• Application: Food industry, well suited to products with high fat content
Features:
• Extremely chemical-resistant | e. g. appropriate for the use of
• polar solvents
• Plasticizer and oil-free
• Superior flex life in peristaltic pumps
• Translucent to ease visual inspection
• Outstanding flexibility
• Material: Thermoplastic tube, transparent
• Complies with the standards: USP Class VI, FDA (21 CFR 177.2600) and GLP
• Temperature range: -78 to +71 °C
• Sterilization: Can be autoclaved for 30 min at 1 bar, sterilized by irradiation or with ethylene oxide

The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability.

Standard Equipment
• Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity
• Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C
• Thermocouple type S (1200 °C)
• Ceramic heating plates with integral heating element which is safeguarded and easy to replace
• With flap door (L)
• Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
• Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
• Adjustable air inlet integrated in door (see illustration)
• Exhaust air outlet in rear wall of furnace
• Controller with touch operation B510 (5 programs with each 4 segments)
• Solid state relays provide for lownoise operation

Option
• Chimney, chimney with fan or catalytic converter (not for L 1 and L 15)
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight
• Manual or automatic gas supply system
• Port for thermocouple in the rear wall or in the furnace door

Tray with fixed clamps F-5000 With 4 clamps