All products

The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability.

Standard Equipment
• Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity
• Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C
• Thermocouple type S (1200 °C)
• Ceramic heating plates with integral heating element which is safeguarded and easy to replace
• With flap door (L)
• Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
• Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
• Adjustable air inlet integrated in door (see illustration)
• Exhaust air outlet in rear wall of furnace
• Controller with touch operation C550
• Solid state relays provide for lownoise operation

Option
• Chimney, chimney with fan or catalytic converter (not for L 1 and L 15)
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight
• Manual or automatic gas supply system
• Port for thermocouple in the rear wall or in the furnace door

Protects your magnetic stirrer from splashing and dripping water, for all Hei-PLATE Mix 'n' Heat models

Tray with fixed clamps F-500 To load 26 Erlenmeyer flasks with a volume of 500 ml

For Single- and Multi-Channel use (not suitable with cassette small)
• Application: For standard applications
Features:
• Non-toxic, non-oxidizing
• Good resistance to acids, bases and inorganic media
• Very low gas permeability, good performance life
• Material: Thermoplastic soft PVC, transparent
• Complies with the standards: FDA (21 CFR 177.2601) and GLP
• Temperature range: -50 to +75 °C
• Sterilization: Can be autoclaved for 30 min at 1 bar and 120 °C (material may change color) or with ethylene oxide
• Restriction: Segregation of plasticizers is possible

With the new ATEX VARIO® chemistry diaphragm pumps and vacuum systems, the vacuum can be precisely controlled by the motor speed. The VARIO® pump is driven by an additional control signal line. The optional vacuum controller CVC 3000 with system accessories (I/O-Module, supply / isolation amplifier) and ATEX vacuum sensor enable fully automatic evaporations without the need for parameter settings or user programming. With the adaptive control it finds the boiling pressure independently and adjusts the vacuum continuously and optimally according to the vapor pressure.
The vacuum controller and system accessories are installed in a non-hazardous area.

Performance features
• full advantage of ATEX chemistry diaphragm pumps with separator AK and emission condenser EK
• VARIO®: short process times due to hysteresis-free VARIO® vacuum control
• VARIO®: VARIO® pump operates on demand only as fast as necessary – minimal power consumption, extended maintenance intervals, silent operation
• VARIO®: vacuum controller CVC 3000 (optional) for precise vacuum control and fully automatic processes
• complete system accessories I/O module, isolation amplifier and ATEX vacuum sensor - from one source

ATEX chemistry vacuum systems are ready for use for applications with large amounts of condensable vapors due to optimally configured accessories. Typical applications are rotary evaporators and drying ovens with potentially explosive atmospheres. The separator at the inlet (AK) retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery. Included in delivery is a separate gas ballast connection part for use with inert gas.
ATEX conformity: Pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, Environment with inert purge gas: II 2G Ex h IIB T4 Gb X, Environment without inert purge gas: II 3G Ex h IIB T4 Gc X, Motor: II 2G Ex db IIB T4 Gb

Features
• Outstanding chemical resistance and superior vapor tolerance
• Flame proof motor with integrated, self-locking overload and excess temperature protection for direct 230V / 50Hz single phase power supply. No
• Need for any additional and specific overcurrent protection device
• Overpressure safety relief valves internally and at outlet
• Safety diaphragm technology with option for inert gas purge and detection of diaphragm breakage
• Separator AK and emission condenser EK for pump protection and solvent recovery

Technical data:
• Ultimate vacuum with gas ballast: 10 mbar
• Number of heads: 8
• Number of stages: 4

Engineered for Accuracy, Designed for Demanding Applications

The new Explorer EXP series offers a premium weighing performance, compliance support and data traceability. The advanced features take the EXP to the next level by optimizing the user experience. This Flagship balance is crafted to meet the most demanding requirements of modern scientific research.

Product features

• Applications: Basic Weighing, Parts Counting, Check Counting, Percent Weighing, Check Weighing, Dynamic Weighing, Totalization, Formulation, Differential, Density Determination, Peak Hold, Pipette Adjustment, SQC, Fill Weight Variation, Flow Rate Control
• 7-inch TFT 16.7M Color Touch Screen with Glass Overlay
• AC Adapter Input: 100-240 VAC 0.5A 50-60 Hz
• USB Host (Type A) x 2, USB Device (Type B) x 1, USB Device (Type C) x 1, Ethernet (RJ45) x 1, RS232 x 1; Optional Wi-Fi, Bluetooth Dongle
• Legal for Trade: EC Type Approved
• Modular Design
• Metal Base and Housing
• SST 316 weighing pan
• Motorized Leveling
• 2 touchless sensors and Status lights.
• Automatic doors with anti-pinch safety protection
• Anti-static glass draftshield,
• Built-in ionizer and Sample spotlight (1 mg models)
• Time Synchronization NTP
• Support for HID (Human Interface Device) connection to a computer without the need for drivers
• 4 level user management and an internal system log capacity of 100,000 entries
• 3000 application sample libraries
• Weighing pan size: 130 mm × 130 mm (Square Pan)
• Assembled Dimensions (W×D×H): 229 mm×408 mm×372 mm

Engineered for Accuracy, Designed for Demanding Applications

The new Explorer EXP series offers a premium weighing performance, compliance support and data traceability. The advanced features take the EXP to the next level by optimizing the user experience. This Flagship balance is crafted to meet the most demanding requirements of modern scientific research.

Product features

• Applications: Basic Weighing, Parts Counting, Check Counting, Percent Weighing, Check Weighing, Dynamic Weighing, Totalization, Formulation, Differential, Density Determination, Peak Hold, Pipette Adjustment, SQC, Fill Weight Variation, Flow Rate Control
• 7-inch TFT 16.7M Color Touch Screen with Glass Overlay
• AC Adapter Input: 100-240 VAC 0.5A 50-60 Hz
• USB Host (Type A) x 2, USB Device (Type B) x 1, USB Device (Type C) x 1, Ethernet (RJ45) x 1, RS232 x 1; Optional Wi-Fi, Bluetooth Dongle
• Modular Design
• Metal Base and Housing
• SST 316 weighing pan
• Motorized Leveling
• 2 touchless sensors and Status lights.
• Time Synchronization NTP
• Support for HID (Human Interface Device) connection to a computer without the need for drivers
• 4 level user management and an internal system log capacity of 100,000 entries
• 3000 application sample libraries
• Weighing pan size: 178 mm×201 mm (Trapezoid Pan)
• Assembled Dimensions (W×D×H): 229 mm×408 mm×97 mm

For Single- and Multi-Channel use (not suitable with cassette small)
• Application: For standard applications
Features:
• Non-toxic, non-oxidizing
• Good resistance to acids, bases and inorganic media
• Very low gas permeability, good performance life
• Material: Thermoplastic soft PVC, transparent
• Complies with the standards: FDA (21 CFR 177.2601) and GLP
• Temperature range: -50 to +75 °C
• Sterilization: Can be autoclaved for 30 min at 1 bar and 120 °C (material may change color) or with ethylene oxide
• Restriction: Segregation of plasticizers is possible

As with all circulators from the MAGIO range, the refrigerated circulators stand out thanks to their premium quality, high performance and intuitive operation. The devices offer extra strong pressure and suction pumps, thus fulfilling the highest demands for temperature control of external applications. Whether in basic research, material testing or technical systems – the MAGIO refrigerated circulators offer high-tech solutions for high customer requirements.

Product features

• Ideal for demanding external applications
• Simple control of complex applications
• Continuously adjustable, extremely powerful pressure / suction pump
• Flow rate 16 ... 31 l / min, pressure 0.24 ... 0.92 bar, suction 0.03 ... 0.4 bar
• Large, high-resolution TFT touch display with multilingual user interface
• Parts being in contact with the medium made of stainless steel
• Integrated programmer
• External Pt100 sensor connection
• USB interface
• RS232 interface
• Ethernet interface
• Analog interfaces (accessories)
• Classification III according to DIN 12876-4

It can be equipped with calibration inserts and accessories tailored to individual requirements.

Engineered for Accuracy, Designed for Demanding Applications

The new Explorer EXP series offers a premium weighing performance, compliance support and data traceability. The advanced features take the EXP to the next level by optimizing the user experience. This Flagship balance is crafted to meet the most demanding requirements of modern scientific research.

Product features

• Applications: Basic Weighing, Parts Counting, Check Counting, Percent Weighing, Check Weighing, Dynamic Weighing, Totalization, Formulation, Differential, Density Determination, Peak Hold, Pipette Adjustment, SQC, Fill Weight Variation, Flow Rate Control
• 7-inch TFT 16.7M Color Touch Screen with Glass Overlay
• AC Adapter Input: 100-240 VAC 0.5A 50-60 Hz
• USB Host (Type A) x 2, USB Device (Type B) x 1, USB Device (Type C) x 1, Ethernet (RJ45) x 1, RS232 x 1; Optional Wi-Fi, Bluetooth Dongle
• Legal for Trade: EC Type Approved
• Modular Design
• Metal Base and Housing
• SST 316 weighing pan
• Motorized Leveling
• 2 touchless sensors and Status lights.
• Time Synchronization NTP
• Support for HID (Human Interface Device) connection to a computer without the need for drivers
• 4 level user management and an internal system log capacity of 100,000 entries
• 3000 application sample libraries
• Weighing pan size: 178 mm×201 mm (Trapezoid Pan)
• Assembled Dimensions (W×D×H): 229 mm×408 mm×97 mm

Engineered for Accuracy, Designed for Demanding Applications

The new Explorer EXP series offers a premium weighing performance, compliance support and data traceability. The advanced features take the EXP to the next level by optimizing the user experience. This Flagship balance is crafted to meet the most demanding requirements of modern scientific research.

Product features

• Applications: Basic Weighing, Parts Counting, Check Counting, Percent Weighing, Check Weighing, Dynamic Weighing, Totalization, Formulation, Differential, Density Determination, Peak Hold, Pipette Adjustment, SQC, Fill Weight Variation, Flow Rate Control
• 7-inch TFT 16.7M Color Touch Screen with Glass Overlay
• AC Adapter Input: 100-240 VAC 0.5A 50-60 Hz
• USB Host (Type A) x 2, USB Device (Type B) x 1, USB Device (Type C) x 1, Ethernet (RJ45) x 1, RS232 x 1; Optional Wi-Fi, Bluetooth Dongle
• Modular Design
• Metal Base and Housing
• SST 316 weighing pan
• Motorized Leveling
• 2 touchless sensors and Status lights.
• Time Synchronization NTP
• Support for HID (Human Interface Device) connection to a computer without the need for drivers
• 4 level user management and an internal system log capacity of 100,000 entries
• 3000 application sample libraries
• Weighing pan size: 178 mm×201 mm (Trapezoid Pan)
• Assembled Dimensions (W×D×H): 229 mm×408 mm×97 mm

With extremely powerful pressure/suction pump and intuitive touch display

As with all circulators from the MAGIO range, the refrigerated circulators stand out thanks to their premium quality, high performance and intuitive operation. The devices offer extra strong pressure and suction pumps, thus fulfilling the highest demands for temperature control of external applications. Whether in basic research, material testing or technical systems – the MAGIO refrigerated circulators offer high-tech solutions for high customer requirements.
With a working temperature range of -40 ... +200 °C, the Refrigerated / heating circulator MAGIO MS-800F delivers an outstanding cooling capacity of 0.86 kW at 20 °C despite its compact design.

This cooling machine works with natural, environmentally-friendly refrigerant and was developed with a focus on energy efficiency. This means significant savings on the operating costs for numerous applications, which also means rapid amortization of the procurement cost. At the same time, the lower energy consumption positively contributes to climate protection.

Product features

• Ideal for demanding external applications
• Simple control of complex applications
• Continuously adjustable, extremely powerful pressure / suction pump
• Flow rate 16 ... 31 l / min, pressure 0.24 ... 0.92 bar, suction 0.03 ... 0.4 bar
• Large, high-resolution TFT touch display with multilingual user interface
• Parts being in contact with the medium made of stainless steel
• Integrated programmer
• Integrated external Pt100 connection
• USB connection
• RS232 interface for online communication
• Ethernet
• Analog interfaces (accessory)
• Class III (FL) according to DIN 12876-1
• Connections for solenoid valve
• Integrated pump connection M16×1

It can be equipped with calibration inserts and accessories tailored to individual requirements.

Engineered for Accuracy, Designed for Demanding Applications

The new Explorer EXP series offers a premium weighing performance, compliance support and data traceability. The advanced features take the EXP to the next level by optimizing the user experience. This Flagship balance is crafted to meet the most demanding requirements of modern scientific research.

Product features

• Applications: Basic Weighing, Parts Counting, Check Counting, Percent Weighing, Check Weighing, Dynamic Weighing, Totalization, Formulation, Differential, Density Determination, Peak Hold, Pipette Adjustment, SQC, Fill Weight Variation, Flow Rate Control
• 7-inch TFT 16.7M Color Touch Screen with Glass Overlay
• AC Adapter Input: 100-240 VAC 0.5A 50-60 Hz
• USB Host (Type A) x 2, USB Device (Type B) x 1, USB Device (Type C) x 1, Ethernet (RJ45) x 1, RS232 x 1; Optional Wi-Fi, Bluetooth Dongle
• Modular Design
• Metal Base and Housing
• SST 316 weighing pan
• Motorized Leveling
• 2 touchless sensors and Status lights.
• Time Synchronization NTP
• Support for HID (Human Interface Device) connection to a computer without the need for drivers
• 4 level user management and an internal system log capacity of 100,000 entries
• 3000 application sample libraries
• Weighing pan size: 178 mm×201 mm (Trapezoid Pan)
• Assembled Dimensions (W×D×H): 229 mm×408 mm×97 mm

The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability.

Standard Equipment
• Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity
• Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C
• Thermocouple type N (1100 °C)
• Ceramic heating plates with integral heating element which is safeguarded and easy to replace
• With lift door (LT)
• Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
• Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
• Adjustable air inlet integrated in door (see illustration)
• Exhaust air outlet in rear wall of furnace
• Controller with touch operation B510 (5 programs with each 4 segments)
• Solid state relays provide for lownoise operation

Option
• Chimney, chimney with fan or catalytic converter (not for L 1 and L 15)
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight
• Manual or automatic gas supply system
• Port for thermocouple in the rear wall or in the furnace door

Tray with fixed clamps F-1000 To load with 16 Erlenmeyer flasks with a volume of 1000 ml

For Single- and Multi-Channel use (not suitable with cassette small)
• Application: For standard applications
Features:
• Non-toxic, non-oxidizing
• Good resistance to acids, bases and inorganic media
• Very low gas permeability, good performance life
• Material: Thermoplastic soft PVC, transparent
• Complies with the standards: FDA (21 CFR 177.2601) and GLP
• Temperature range: -50 to +75 °C
• Sterilization: Can be autoclaved for 30 min at 1 bar and 120 °C (material may change color) or with ethylene oxide
• Restriction: Segregation of plasticizers is possible

The PC 3001 VARIO select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. This pump is suitable for even high boiling point solvents.

The integrated VACUU•SELECT controller provides an easy-to-use, application based interface that covers all common lab applications. The VACUU•SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU•SELECT controller detects solvent boiling and automatically adjusts the pump's motor speed to maintain process control.

The VARIO motor speed control also makes the pump whisper quiet and provides for exceptionally long maintenance intervals.

The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection.

Performance features
• simplify lab work with the VACUU•SELECT vacuum controller with graphic user interface and predefined applications
• automatic boiling point detection and continuous optimization of vacuum levels for quick process times
• compact and powerful; superior performance even with continuous condensate purge
• whisper quiet and ultra low vibration
• eco-friendly: extremely low power consumption and efficient solvent recover

Engineered for Accuracy, Designed for Demanding Applications

The new Explorer EXP series offers a premium weighing performance, compliance support and data traceability. The advanced features take the EXP to the next level by optimizing the user experience. This Flagship balance is crafted to meet the most demanding requirements of modern scientific research.

Product features

• Applications: Basic Weighing, Parts Counting, Check Counting, Percent Weighing, Check Weighing, Dynamic Weighing, Totalization, Formulation, Differential, Density Determination, Peak Hold, Pipette Adjustment, SQC, Fill Weight Variation, Flow Rate Control
• 7-inch TFT 16.7M Color Touch Screen with Glass Overlay
• AC Adapter Input: 100-240 VAC 0.5A 50-60 Hz
• USB Host (Type A) x 2, USB Device (Type B) x 1, USB Device (Type C) x 1, Ethernet (RJ45) x 1, RS232 x 1; Optional Wi-Fi, Bluetooth Dongle
• Legal for Trade: EC Type Approved
• Modular Design
• Metal Base and Housing
• SST 316 weighing pan
• Motorized Leveling
• 2 touchless sensors and Status lights.
• Time Synchronization NTP
• Support for HID (Human Interface Device) connection to a computer without the need for drivers
• 4 level user management and an internal system log capacity of 100,000 entries
• 3000 application sample libraries
• Weighing pan size: 178 mm×201 mm (Trapezoid Pan)
• Assembled Dimensions (W×D×H): 229 mm×408 mm×97 mm

Engineered for Accuracy, Designed for Demanding Applications

The new Explorer EXP series offers a premium weighing performance, compliance support and data traceability. The advanced features take the EXP to the next level by optimizing the user experience. This Flagship balance is crafted to meet the most demanding requirements of modern scientific research.

Product features

• Applications: Basic Weighing, Parts Counting, Check Counting, Percent Weighing, Check Weighing, Dynamic Weighing, Totalization, Formulation, Differential, Density Determination, Peak Hold, Pipette Adjustment, SQC, Fill Weight Variation, Flow Rate Control
• 7-inch TFT 16.7M Color Touch Screen with Glass Overlay
• AC Adapter Input: 100-240 VAC 0.5A 50-60 Hz
• USB Host (Type A) x 2, USB Device (Type B) x 1, USB Device (Type C) x 1, Ethernet (RJ45) x 1, RS232 x 1; Optional Wi-Fi, Bluetooth Dongle
• Modular Design
• Metal Base and Housing
• SST 316 weighing pan
• Motorized Leveling
• 2 touchless sensors and Status lights.
• Time Synchronization NTP
• Support for HID (Human Interface Device) connection to a computer without the need for drivers
• 4 level user management and an internal system log capacity of 100,000 entries
• 3000 application sample libraries
• Weighing pan size: 178 mm×201 mm (Trapezoid Pan)
• Assembled Dimensions (W×D×H): 229 mm×408 mm×97 mm