All products

Insert for the optimum loading of beakers 250 - 600 ml.
• Equipped with 15 x 3 stay bars for beakers from 250 ml to 600 ml

Machine affiliation:
PG 8527
PLW 8615
PLW 8616
PLW 8617

Particularly in the case of applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers!
The particular shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. You can find out more about this here.
The VISCO JET® 120 is ideal for vessels with the following characteristics:
• Ideal vessel diameter: 200- 300 mm
• Ideal ground clearance: 36 mm
• Ideal filling level: 200- 300 mm
• Ideal volume: 6,300 - 21,200 ml
This VISCO JET® 120 is made of POM plastic and can be used up to max. 90°C.
A polyamide coated stirrer shaft with a diameter of approx. 10 mm is included in the scope of delivery.

Insert for holding different utensils.
• Perforated plate 7 x 7 x 3 mm
• Suitable for E 900-4/1, E 935/1, E 975/2, E 941 with E 945*

Machine affiliation:
PG 8527
PLW 8615
PLW 8616
PLW 8617

Particularly in the case of applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers!
The particular shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. You can find out more about this here.
The VISCO JET® Crack 80 is ideal for vessels with the following characteristics:
• Ideal vessel diameter: 133- 200 mm
• Ideal ground clearance: 24 mm
• Ideal filling level: 133- 200 mm
• Ideal volume: 1,900 - 6,300 ml
The VISCO JET® Crack 80 is made of stainless steel
A stirrer shaft with a diameter of 10 mm is included in the scope of delivery.

Particularly in the case of applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers!
The particular shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. You can find out more about this here.
The VISCO JET® Crack 120 is ideal for vessels with the following characteristics:
• Ideal vessel diameter: 200- 300 mm
• Ideal ground clearance: 36 mm
• Ideal filling level: 200- 300 mm
• Ideal volume: 6,300 - 21,200 ml
The VISCO JET® Crack 120 is made of stainless steel
A stirrer shaft with a diameter of 10 mm is included in the scope of delivery.

This chemistry vacuum pumping unit is an economical, compact solution for simultaneous operation of two electronically controlled vacuum applications with a single pump. Based on our popular MD 4C NT three-stage chemistry diaphragm pump, the PC 620 select is frequently used for vacuum applications involving even high boiling point solvents. This pump has sufficient capacity to run two demanding applications simultaneously.
Both vacuum ports have independent solenoid valves for electronic vacuum control, and check valves to protect against cross contamination and interference. The integrated VACUU·SELECT controller provides an easy-to-use, application based interface that covers all common lab applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, it constantly monitors the pressure and switches to 2 point control mode to hold the pressure stable when a boiling point is detected. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection.

Performance features
VACUU·SELECT vacuum controller with graphical user interface simplifies work in the laboratory
predefined applications save time and give reproducible result
easy-to-use application editor allows own process sequences
meets high vacuum requirements for most high boiling solvents
PC 620 select allows simultaneous operation of two independent vacuum applications with electronic vacuum contro

The PC 3004 VARIO select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. With its high pumping speed and deep ultimate vacuum, this pump is suitable for demanding applications with even high boiling point solvents.

The integrated VACUU•SELECT controller provides an easy-to-use, application based interface that covers all common lab applications. The VACUU•SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU•SELECT controller continuously detects the boiling point and automatically adjusts the vacuum process as necessary.

And the VARIO control algorithm maintains the desired vacuum level without running the motor faster than necessary. This prevents bumping and foaming, makes the pump whisper quiet, and extends maintenance intervals.

The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection.

Performance features
• VACUU•SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory
• automatic boiling point detection and adjustment of the vacuum for short process times
• powerful vacuum pump meets high vacuum requirements for most high boiling solvents
• extraordinary diaphragm life, therefore minimum operational and servicing costs
• excellent environmental compatibility through low energy consumption and efficient solvent recovery

The MD 12 NT diaphragm pump is an especially powerful pump for oil-free evacuation and pumping of non aggressive gases. The three-stage design of this eight-cylinder pump provides the advantageous combination of very high pumping speed and excellent ultimate vacuum. The flow path consists of aluminium, stainless steel and carefully selected plastics to permit a wide range of applications. The fabric-reinforced double diaphragms are made of highly flexible FKM for extended operating life and high vacuum performance. Eight-cylinder NT pumps feature quiet operation, with smooth and easy-to-clean surfaces. Like all VACUUBRAND diaphragm pumps they operate absolutely oil-free and do not have any sliding components in the gas path. In normal operation they are completely free of abrasion. This eliminates most of the particulate impurities frequently generated inside of scroll or piston pumps.

Performance features
• contamination-free pumping and evacuation
• high flow rate even near ultimate vacuum
• whisper quiet
• reduced process times
• exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs

Three-stage chemistry diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet the highest requirements. The three-stage design of the eight-cylinder MD 12C NT pump provides the advantageous combination of high pumping speed and very low ultimate vacuum. All internal parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms provide increased reliability and extended operating life. With its gas ballast valve the MD 12C NT is optimally prepared for pumping easily condensable vapors, thanks to the very good ultimate vacuum even with open gas ballast valve also for high boiling solvents. Upgrade kits such as inlet separator (AK) and exhaust vapor condenser (EK) enable a later adaptation to changed process requirements. Eight-cylinder NT pumps features quiet operation with smooth, easy-to-clean surfaces.

Performance features
• outstanding chemical resistance and superior vapor tolerance
• reduced process time due to particularly high pumping speed even near ultimate vacuum
• whisper quiet and very low vibration
• very good ultimate vacuum even with open gas ballast valve for condensate purge
• long diaphragm lifetime, maintenance-free drive system

The beer force test is a method used to determine the shelf life and stability of beer. This test is performed to analyze a beer's shelf life and tendency to microbiological or chemical change. The objective of this test is to quickly predict the beer's behavior over long storage periods. This is done by bottling beer samples and simulating artificial, accelerated aging by means of temperature cycles. This is repeated until an initial turbidity is detected by a photometer. The force test is particularly useful for breweries optimizing their product quality assurance process, helping them identify potential problems before their beer is released to the market.

DYNEO DD-1201F-BF has all the temperature profiles necessary to perform the force test, for both stabilized and untreated beer, already installed. If specific changes to the program settings are needed, the user can make these changes at any time and in a simplified manner.

Product features

• Automatic cycles of temperature ramps simulate aging
• Pre-programmed temperature profiles for forcing test
• Program modification possible at any time
• Large bath opening with insert for 20 bottles, 0.5 liters each (Racks for other bottle sizes on request)
• Removable Plexiglass® cover
• RS232 interface for online communication
• Powerful and infinitely adjustable pressure pump
• Flow rate 27 l/min, pressure 0.7 bar
• Large color TFT display, multilingual interface
• Central rotary knob (controller) simplifies operation
• Integrated programmer
• Integrated external Pt100 connection
• PID3 cascade temperature control

For Ranger 7000, there is one resounding theme: it offers the best of every ingenious feature that make OHAUS industrial products the right tools for your toughest weighing jobs. Ranger 7000 boasts the highest resolution, largest display, most application modes and connectivity options, as well as the largest memory library of any industrial bench scale in the OHAUS portfolio.
• Applications
Weighing, Parts Counting with Auto Optimization, Percent Weighing, Advanced Checkweighing, Animal/Dynamic Weighing, Display Hold, Filling, Formulation, Differential Weighing, Density Determination, Sieve Analysis
• Display
4.3" (109 mm) Full-color WQVGA graphic display with user-controlled brightness
• Operation
AC power (included) or rechargeable battery (accessory sold separately)
• Communication
Easy access communication port including standard USB and RS232 (included) and an optional third port of RS232 or Ethernet (accessories sold separately). GLP/GMP Data Output with Real Time Clock. Data Transfer Function.
• Construction
Modular design, die-cast housing, removable stainless steel platform, integral weigh below hook, menu lock switch, level indicator
• Design Features
Checkweighing lights with selectable operation and audible signal settings, several selectable operating languages, selectable environmental and autoprint settings, stability indicator, overload/underload indicators, selectable brightness settings, auto-dim, auto-sleep, auto tare, chain tare

With the help of high-quality Ohaus Frontier rotors and adapters, you can find the best solution for both basic and high-performance sample preparation needs.

Insert for the gentle cleaning of delicate load items by interrupting the water jet.
• With perforations 7 x 7 mm
• For use in upper and lower basket
• Not for use in PG 8536

Machine affiliation:
G 7825
PG 8527
PG 8535
PLW 8636 [LAB / LAB MON]
PG 8504
PG 8583
PG 8583 CD
PG 8593
PLW 8683
PLW 8683 CD
PLW 8693
PLW 8505
PLW 8604
PLW 8615
PLW 8616
PLW 8617
PLW 6011
PLW 6111
PLW 7111

These chemistry vacuum systems have a wide range of applications like evacuation, evaporation and pumping of gases and vapors. They provide a particularly high pumping speed and are ideal for higher vacuum requirements, e.g., with high boiling solvents. The base pump MD 12C NT obtains a very good ultimate vacuum even with gas ballast and features high performance in a compact design. The consistent design for highest chemical resistance enables almost universal usage in chemistry and pharmaceutics. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling and active protection of the environment. An optional separator at the inlet (AK) made of glass with protective coating retains particles and liquid droplets and can be mounted later to this system.

Performance features
• outstanding chemical resistance and superior vapor tolerance
• reduced process time due to particularly high pumping speed even near ultimate vacuum
• whisper quiet and very low vibration
• very good ultimate vacuum even with open gas ballast valve for condensate purge
• excellent environmental friendliness due to efficient solvent recovery

CORIO C Heating Immersion Circulator
The CORIO C Immersion Circulator is the basic model of the CORIO circulator portfolio. The bath attachment clamp is included in delivery and facilitates mounting of the circulator on any bath tank up to 30 liters.
Your advantages
• Precise temperature control
• For internal standard applications
• For bath tanks with a max. filling volume of 30 liters
• Bright, white, easy to read display
• Very quiet
• Easy operation
• Class I (NFL) according to DIN 12876-1
• For bath tanks with a max. filling volume of 50 liters
• Class III (FL) according to DIN 12876-1
• Powerful and infinitely adjustable pressure pump

Insert for the gentle cleaning of delicate load items by interrupting the water jet.
• With perforations 7 x 7 mm
• For use in upper and lower basket
• Covers half of basket
• Not for use in PG 8536

Machine affiliation:
G 7825
PG 8527
PG 8535
PG 8536
PLW 8636 [LAB / LAB MON]
PG 8504
PG 8583
PG 8583 CD
PG 8593
PLW 8683
PLW 8683 CD
PLW 8693
PLW 8505
PLW 8604
PLW 8615
PLW 8616
PLW 8617
PLW 6011
PLW 6111
PLW 7111

For Ranger 7000, there is one resounding theme: it offers the best of every ingenious feature that make OHAUS industrial products the right tools for your toughest weighing jobs. Ranger 7000 boasts the highest resolution, largest display, most application modes and connectivity options, as well as the largest memory library of any industrial bench scale in the OHAUS portfolio.
• Applications
Weighing, Parts Counting with Auto Optimization, Percent Weighing, Advanced Checkweighing, Animal/Dynamic Weighing, Display Hold, Filling, Formulation, Differential Weighing, Density Determination, Sieve Analysis
• Display
4.3" (109 mm) Full-color WQVGA graphic display with user-controlled brightness
• Operation
AC power (included) or rechargeable battery (accessory sold separately)
• Communication
Easy access communication port including standard USB and RS232 (included) and an optional third port of RS232 or Ethernet (accessories sold separately). GLP/GMP Data Output with Real Time Clock. Data Transfer Function.
• Construction
Modular design, die-cast housing, removable stainless steel platform, integral weigh below hook, menu lock switch, level indicator
• Design Features
Checkweighing lights with selectable operation and audible signal settings, several selectable operating languages, selectable environmental and autoprint settings, stability indicator, overload/underload indicators, selectable brightness settings, auto-dim, auto-sleep, auto tare, chain tare

CORIO CD Heating Immersion Circulator
In addition to the advantages of the CORIO C Circulator, the CORIO CD Immersion Circulator can be equipped with an optional pump set for temperature control of external applications.
Your advantages
• Precise temperature control
• For internal and external applications (accessories required)
• For bath tanks with a max. filling volume of 50 liters
• Bright, white, easy to read display
• Easy operation
• Easy pump change-over between internal and external circulation
• USB connection
• Class III (FL) according to DIN 12876-1

For fixing delicate wash items.
• Lid in stainless steel
• 1 mm wire, 8 mm mesh size, 4 mm frames
• As replacement for E 103, E 104, E 105 and E 139 inserts

Machine affiliation:
G 7825
PG 8527
PG 8535
PG 8536
PLW 8636 [LAB / LAB MON]
PG 8504
PG 8583
PG 8583 CD
PG 8593
PLW 8615
PLW 8616
PLW 8617
PLW 6011
PLW 6111
PLW 7111
PLW 8505
PLW 8604
PLW 8683
PLW 8683 CD
PLW 8693