All products

This laboratory fridge features 1 plastic drawer and 3 plastic-coated shelves as standard. All shelves and inserts are vertically adjustable and the device has an explosion-proof interior. A glass door can also be ordered optionally.
• PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
• Re-circulating air cooling
• 1 drawer and 3 shelves, height-adjustable
• Warning in case of power failure (optical and acoustic)
• Explosion proof interior (LABEX®-Increased-Safety)
• Optimized ventilation plates to minimize interior temperature differences
• Automatic defrosting
• Meltwater tray for manual emptying
• Easy-to-read LED temperature display
• Easy accessible control panel with key switch
• Micro-processor controlled temperature and thawing regulation to maximize temperature stability
• Minimum/maximum temperature memory
• Safety device to prevent freezing
• Optical and acoustical alarm
• Data documentation can be read via USB interface with KIRSCH Datanet software.
• Potential free contact for alarm transmission
Options
• Insulating glass door with lock
• Decorative frame
• Castors
• Drawers on support rails
• Additional shelves with support brackets or support rails
• Additional lenght and cross dividers for drawer
• GSM-Module
• PC-KIT-NET (Network capable version)
• Pen-recording thermometer for placing loosely inside appliance with waxed paper strips
• Temperature probe PT 100 or PT 1000,
• 4 wire sensor, class 1/3 B, incl. measuring flask incorporated
Technical specifications
• Capacity: 280 l
• Temperature setting (approx.): +0 to +15 °C
• Voltage: 220 - 240 V
• Frequency: 50 / 60 Hz
• Power consumption: 100 Watts
• Average consumption: 0,76 KWh / 24 h
• Overall dimensions
• (incl. distance from wall): 67 x 75 x 131 (w x d x h in cm)
• Interior dimensions: 53 x 50 x 100 (w x d x h in cm)
• Overall dimensions with door
• opened at 90°: 67 x 135 (w x d in cm)
• Drawer inner dimensions: 50,4 x 32 x 5,6 (w x d x h in cm)
• Shelf dimensions: 52,7 x 39 (w x d in cm)
• Max. loading capacity per drawer/shelf: 16 kg / 40 kg
• Weight: 72 kg / 85 kg (net / gross)

This laboratory fridge has a glass door, an integrated power outlet strip with 3 sockets and a cable bushing with a diameter of approximately 7 cm fitted as standard. The cable bushing is located in the middle of the right side panel.
• PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
• 5 shelves, height-adjustable
• Castors
• Warning in case of power failure (optical and acoustic)
• Insulating glass door and interior light
• Built-in 3-way-socket
• Access port for cables and probes
• diameter app. 7 cm
• Re-circulating air cooling
• Optimized ventilation plates to minimize interior temperature differences
• Easy-to-read LED temperature display
• Automatical defrosting and melt water evaporation
• Rapid defrosting
• Easy accessible control panel with key switch
• Micro-processor controlled temperature and thawing regulation to maximize temperature stability
• Minimum/maximum temperature memory
• Safety device to prevent freezing
• Optical and acoustical alarm
• Data documentation can be read via USB interface with KIRSCH Datanet software.
• Low-noise compressor
• Potential free contact for alarm transmission
• Low-noise compressor
• Lockable door
Options
• Insulating glass door
• Adjustable feet to compensate for uneven floors.
• Lock for glass door
• Additionals shelves on mountings or support rails
• Additional drawers on telescopic runner (57x40x5,6 cm): max. 12 pieces
• Additional lenght and cross dividers for drawers
• Aluminium trays or baskets with support rails
• Meltwater tray for manual emptying
• Cooling machine with cold water connection
• Cooling machines with natural refrigerant
• Outer panels in stainless steel 4301
• GSM-Modul
• PC-KIT-NET (Network capable version)
• Pen-recording thermometer for placing loosely inside appliance with waxed paper strips
• Disc-type pen-recording thermometer with 7-day measuring cycle with 100 recording discs and 5 felt tip pens
• Temperature probe PT 100 or PT 1000,
• 4 wire sensor, class 1/3 B, incl. measuring flask incorporated
Technical specifications
• Capacity: 720 l
• Temperature setting (approx.): +2 to +15 °C
• Voltage: 220 - 240 V
• Frequency: 50 Hz
• Power consumption: 250 Watts
• Average consumption: 1,63 KWh / 24 h
• Overall dimensions (incl. distance from wall): 77 x 98 x 195,5 (w x d x h in cm)
• Interior dimensions: 62 x 77 x 140 (w x d x h in cm)
• Overall dimensions with door opened at 90°: 77 x 165 (w x d in cm)
• Shelf dimensions: 59 x 65 (w x d in cm)
• Max. loading capacity per shelf: 40 kg
• Weight: 145 kg / 174 kg (net / gross)

This laboratory refrigerator has 5 vertically adjustable and plastic coated shelves which rest on mountings. This laboratory refrigerator can optionally be fitted with a glass door.
• PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
• 5 shelves, height-adjustable
• Castors.
• Re-circulating air cooling
• Warning in case of power failure (optical and acoustic)
• Optimized ventilation plates to minimize interior temperature differences
• Easy-to-read LED temperature display
• Automatical defrosting and melt water evaporation
• Rapid defrosting
• Easy accessible control panel with key switch
• Micro-processor controlled temperature and thawing regulation to maximize temperature stability
• Minimum/maximum temperature memory
• Safety device to prevent freezing
• Optical and acoustical alarm
• Data documentation can be read via USB interface with KIRSCH Datanet software
• Potential free contact for alarm transmission
• Low-noise compressor
Options
• Insulating glass door with lock
• Adjustable feet to compensate for uneven floors.
• Shelves on mountings or support rails
• Additional drawers on telescopic runners (57x40x5,6 cm): max. 12 pieces
• Additional lenght and cross dividers for drawers
• Aluminium trays or baskets with support rails
• LED illumination mounted at side wall
• Meltwater tray for manual emptying
• Cooling machine with cold water connection
• Cooling machines with natural refrigerant
• Outer panels in stainless steel 4301
• GSM-Modul
• PC-KIT-NET (Network capable version)
• Pen-recording thermometer for placing loosely inside appliance with waxed paper strips
• Disc-type pen-recording thermometer with 7-day measuring cycle with 100 recording discs and 5 felt tip pens
• Temperature probe PT 100 or PT 1000,
• 4 wire sensor, class 1/3 B, incl. measuring flask incorporated
Technical specifications
• Capacity: 700 l
• Temperature setting (approx.): +2 to +15 °C
• Voltage: 220 - 240 V
• Frequency: 50 Hz
• Power consumption: 250 Watts
• Average consumption: 1,46 KWh / 24 h
• Overall dimensions
• (incl. distance from wall): 77 x 98 x 195,5 (w x d x h in cm)
• Interior dimensions: 62 x 77 x 140 (w x d x h in cm)
• Overall dimensions with door
• opened at 90°: 77 x 165 (w x d in cm)
• Shelf dimensions: 59 x 65 (w x d in cm)
• Max. loading capacity per drawer/shelf: 40 kg
• Weight: 145 kg / 174 kg (net / gross)

This laboratory refrigerator has 5 vertically adjustable and plastic coated shelves which rest on mountings. The shelves can optionally rest onsupport rails. Drawers, aluminium trays and wire baskets are available as well.
• PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
• Castors
• 5 shelves, height-adjustable
• Re-circulating air cooling
• Warning in case of power failure (optical and acoustic)
• Optimized ventilation plates to minimize interior temperature differences
• Easy-to-read LED temperature display
• Automatical defrosting and melt water evaporation
• Easy accessible control panel with key switch
• Micro-processor controlled temperature and thawing regulation to maximize temperature stability
• Minimum/maximum temperature memory
• Safety device to prevent freezing
• Optical and acoustical alarm
• Data documentation can be read via USB interface with KIRSCH Datanet software.
• Potential free contact for alarm transmission
• Low-noise compressor
• Lockable door
Options
• Insulating glass door with lock
• Adjustable feet to compensate for uneven floors.
• Shelves on mountings or support rails
• Additional drawers on telescopic runners (57x40x5,6 cm): max. 12 pieces
• Additional length and cross dividers for drawers
• Aluminum trays or baskets with support rails
• LED illumination mounted at side wall
• Meltwater tray for manual emptying
• Cooling machine with cold water connection
• Cooling machines with natural refrigerant
• Outer panels in stainless steel 4301
• GSM-Modul
• PC-KIT-NET (Network capable version)
• Pen-recording thermometer for placing loosely inside appliance with waxed paper strips
• Temperature probe PT 100 or PT 1000,
4 wire sensor, class 1/3 B, incl. measuring flask incorporated
Technical specifications
• Capacity: 500 l
• Temperature setting (approx.): +2 to +15 °C
• Voltage: 220 - 240 V
• Frequency: 50 Hz
• Power consumption: 250 Watts
• Average consumption: 1,40 KWh / 24 h
• Overall dimensions (incl. distance from wall): 77 x 76 x 195,5 (w x d x h in cm)
• Interior dimensions: 62 x 57 x 140 (w x d x h in cm)
• Overall dimensions with door opened at 90°: 74 x 144 (w x d in cm)
• Shelf dimensions: 59 x 45 (w x d in cm)
• Max. loading capacity per drawer/shelf: 40 kg
• Weight: 120 kg / 148 kg (net / gross)

This laboratory refrigerator has 4 vertically adjustable and plastic coated shelves which rest on mountings. The shelves can optionally rest on support rails. Drawers, aluminium trays and wire baskets are available as well.
• PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
• 4 shelves, height-adjustable
• Re-circulating air cooling
• Warning in case of power failure (optical and acoustic)
• Optimized ventilation plates to minimize interior temperature differences
• Easy-to-read LED temperature display
• Automatical defrosting and melt water evaporation
• Easy accessible control panel with key switch
• Micro-processor controlled temperature and thawing regulation to maximize temperature stability
• Minimum/maximum temperature memory
• Safety device to prevent freezing
• Optical and acoustical alarm
• Data documentation can be read via USB interface with KIRSCH Datanet software.
• Potential free contact for alarm transmission
• Low-noise compressor
• Lockable door
Options
• Insulating glass door
• Lock for glass door
• Decorative frame
• 60 Hz cooling machine upon request
• Castors
• Additional shelves on mountings or support rails
• Additional drawers on telescopic runners (57x43x5,6 cm): max. 12 pieces
• Additional lenght and cross dividers for drawers
• Aluminium trays or baskets with support rails
• LED illumination mounted at side wall
• Meltwater tray for manual emptying
• GSM-Module
• PC-KIT-NET (Network capable version)
• Pen-recording thermometer for placing loosely inside appliance with waxed paper strips
• Temperature probe PT 100 or PT 1000,
• 4 wire sensor, class 1/3 B, incl. measuring flask incorporated
Technical specifications
• Capacity: 460 l
• Temperature setting (approx.): +2 to +15 °C
• Voltage: 220 - 240 V
• Frequency: 50 Hz
• Power consumption: 170 Watts
• Average consumption: 1,00 KWh / 24 h
• Overall dimensions (incl. distance from wall): 74 x 80 x 181 (w x d x h in cm)
• Interior dimensions: 60 x 57 x 128 (w x d x h in cm)
• Overall dimensions with door opened at 90°: 74 x 144 (w x d in cm)
• Shelf dimensions: 59 x 50 (w x d in cm)
• Max. loading capacity per drawer/shelf: 24 kg / 40 kg
• Weight: 109 kg / 122 kg (net / gross)

The laboratory fridge comes with 1 drawer and 4 shelves as standard.
• PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
• 1 drawer and 4 shelves, height- adjustable
• Re-circulating air cooling
• Warning in case of power failure (optical and acoustic)
• Optimized ventilation plates to minimize interior temperature differences
• Easy-to-read LED temperature display
• Automatical defrosting and melt water evaporation
• Easy accessible control panel with key switch
• Micro-processor controlled temperature and thawing regulation to maximize temperature stability
• Minimum/maximum temperature memory
• Safety device to prevent freezing
• Optical and acoustical alarm
• Data documentation can be read via USB interface with KIRSCH Datanet software.
• Potential free contact for alarm transmission
• Lockable door
Options
• Insulating glass door
• Lock for glass door
• Decorative frame
• Castors
• Additional s helves on mountings or telescopic runners
• Additional drawers on telescopic runners: max. 10 pieces
• Additional lenght and cross dividers for drawer
• LED illumination mounted at side wall
• Meltwater tray for manual emptying
• GSM-Module
• PC-KIT-NET (Network capable version)
• Pen-recording thermometer for placing loosely inside appliance with waxed paper strips
• Temperature probe PT 100 or PT 1000,
• 4 wire sensor, class 1/3 B, incl. measuring flask incorporated
Technical specifications
• Capacity: 330 l
• Temperature setting (approx.): +2 to +15 °C
• Voltage: 220 - 240 V
• Frequency: 50 Hz
• Power consumption: 110 Watts
• Average consumption: 0,65 KWh / 24 h
• Overall dimensions (incl. distance from wall): 67 x 69 x 181 (w x d x h in cm)
• Interior dimensions: 53 x 45 x 128 (w x d x h in cm)
• Overall dimensions with door opened at 90°: 67 x 127 (w x d in cm)
• Drawer inner dimensions: 50,4 x 32 x 5,6 (w x d x h in cm)
• Shelf dimensions: 53 x 39
• Max. loading capacity per drawer/shelf: 16 kg / 40 kg
• Weight: 88 kg / 100 kg (net / gross)

This laboratory fridge comes with 3 shelves as standard. The refrigerator can also be equipped with power failure alarm against surcharge.
• PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
• 3 shelves, height- adjustable
• Re-circulating air cooling
• Warning in case of power failure (optical and acoustic)
• Optimized ventilation plates to minimize interior temperature differences
• Easy-to-read LED temperature display
• Automatical defrosting and melt water evaporation
• Easy accessible control panel with key switch
• Micro-processor controlled temperature and thawing regulation to maximize temperature stability
• Minimum/maximum temperature memory
• Safety device to prevent freezing
• Optical and acoustical alarm
• Data documentation can be read via USB interface with KIRSCH Datanet software.
• Potential free contact for alarm transmission
• Lockable door
Options
• Decorative frame
• Glass door with lock
• 60 Hz cooling machine upon request
• Castors
• Door fitting
• Condensate container
• Plastic-drawer on roller runners
• Aluminium-drawer on roller runners
• Stainless steel-drawer
• Additional shelf on rails or overlays
• Additional lenght and cross dividers for drawer
• LED illumination mounted at side wall
• GSM-Module
• PC-KIT-NET (Network capable version)
• Pen-recording thermometer for placing loosely inside appliance with waxed paper strips
• Temperature probe PT 100 or PT 1000,
• 4 wire sensor, class 1/3 B, incl. measuring flask incorporated
Technical specifications
• Capacity 280 l
• Temperature setting (approx.) +2 to +15 °C
• Voltage : 220 - 240 V
• Frequency: 50 Hz
• Power consumption: 88 Watts
• Average consumption: 0,68 KWh / 24 h
• Overall dimensions (incl. distance from wall): 67 x 75 x 124 (w x d x h in cm)
• Interior dimensions: 53 x 50 x 100 (w x d x h in cm)
• Overall dimensions with door opened at 90°: 67 x 135 (w x d in cm)
• Shelf dimensions: 52 x 39 (w x d in cm)
• Max. loading capacity per drawer/shelf: 40 kg
• Weight: 78 kg / 85 kg (net / gross)

This laboratory refrigerator can be installed normally as well as in an undercounter installation. Door coupling fittings or decorative frames are available at an extra cost. When the device is being installed as a stand-alone unit we can optionally supply a matching tabletop.
• PRO-ACTIVE- Control:
• Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors
• 2 shelves
• Re-circulating air cooling
• Undercounter type
• Warning in case of power failure (optical and acoustic)
• Automatic defrosting
• Melt water evaporation
• Easy-to-read LED temperature display
• Automatical defrosting and melt water evaporation
• Easy accessible control panel with key switch
• Micro-processor controlled temperature and thawing regulation to maximize temperature stability
• Minimum/maximum temperature memory
• Safety device to prevent freezing
• Optical and acoustical alarm
• Data documentation can be read via USB interface with KIRSCH Datanet software.
• Potential free contact for alarm transmission
• Low-noise compressor (noise level I; sounds perception: whisper)
• Lockable door
Options
• Glass door with lock
• Work surface
• 60 Hz cooling machine upon request
• Decorative frame
• Door fitting
• Castors
• Additional shelf or drawer
• Additional length and cross dividers
• Melt water tray for manual emptying
• GSM-Module
• PC-KIT-NET (Network capable version)
• Pen-recording thermometer for placing loosely inside appliance with 2 waxed paper strips
• Temperature probe PT 100 or PT 1000, 4 wire sensor, class 1/3 B, incl. measuring flask incorporated
Technical Specifications
• Capacity 95 l
• Temperature setting (approx.) +2 to +15 °C
• Voltage 220 - 240 V
• Frequency 50 Hz
• Power consumption 76 Watts
• Average consumption 0,64 KWh / 24 h
• Overall dimensions
• (incl. distance from wall) 54 x 54 x 82 (w x d x h in cm)
• Interior dimensions 44 x 43 x 47 (w x d x h in cm)
• Overall dimensions with door
• opened at 90° 54 x 106 (w x d in cm)
• Drawer inner dimensions 40 x 32 x 5,6 (w x d x h in cm)
• Shelf dimensions 43 x 36 (w x d in cm)
• Max. loading capacity per drawer/shelf 13 kg / 25 kg
• Weight 46 kg / 50 kg (net / gross)

This laboratory fridge can be installed normally as well as in an undercounter installation. Door coupling fittings or decorative frames are available at an extra cost. The temperature display can optionally be installed in the front side of an external furniture. When the device is being installed as a stand-alone unit we can supply a matching tabletop at a surcharge.
Overview
• 2 shelves
• Undercounter type
• Automatic defrosting
• Melt water evaporation
• Digital temperature display
• Acoustic warning device
• Lockable door
Options
• Glass door
• Work surface
• Decorative frame
• Door fitting
• Castors
• Additional shelves: 43,8 x 33 cm
• Additional drawers: 40,8 x 32 x 5,6 cm
• Additional length and cross dividers
• Digital temperature display prepared for external installation
• Connecting terminal for remote alarm (potential free contact)
• Melt water tray for manual emptying
• GSM-Module
• Compressor ventilator installed, in case built-in furniture or handling with 60Hz version
• GSM-Module
• Pen-recording thermometer for placing loosely inside appliance with 2 waxed paper strips
• PT 100 or PT 1000 sensor for temperature recording and monitoring via EDP system
Technical specifications
• Capacity: 120 l
• Temperature setting (approx.): +2 to +15 °C
• Voltage: 220 - 240 V
• Frequeny: 50 Hz
• Power consumption: 125 Watts
• Average consumption: 0,55 KWh / 24 h
• Overall dimensions (incl. distance from wall): 54 x 53,5 x 81 (w x d x h in cm)
• Interior dimensions: 44 x 42 x 67 (w x d x h in cm)
• Overall dimensions with door opened at 90°: 54 x 106 (w x d in cm)
• Shelf dimensions: 43 x 33 (w x d in cm)
• Max. loading capacity per drawer/shelf : 13 kg / 25 kg
• Weight: 42 kg / 44 kg (net / gross)

Safety storage cabinets type G90 for pressurised gas cylinders
Optimum solution from DÜPERTHAL for the storage of pressurised gas cylinders with 90-minute fire protection.
• Width: 1395 mm
• Depth: 610 mm
• Height: 2070 mm
• Weight: 680 kg
• Classical door technology (door handle).
• For the storage of pressurised gas cylinders.
• Type testing by MPA/TÜV SÜD according to DIN EN 14470-2, DIN EN 16121 and DIN EN 16122, EK5/AK4 09-10:2009 and AfPS GS 2014:01 PAK Mark of approval: GS/CE mark, high quality mark of approval by TÜV SÜD
Construction and colour:
• Outer carcass sheet steel, RAL 7035
• Doors sheet steel, RAL 3003
• Inner carcass of decor panels, RAL 7035 Fittings and features:
• Cylinder lock for safe access
• Roll-in flap with pitch
• Cylinder holder incl 4 retaining belts
• Fitting holder
• Exhaust air connection socket on the cabinet roof

Safety storage cabinets type G90 for pressurised gas cylinders
Optimum solution from DÜPERTHAL for the storage of pressurised gas cylinders with 90-minute fire protection.
• Width: 1195 mm
• Depth: 610 mm
• Height: 2070 mm
• Weight: 595 kg
• Classical door technology (door handle).
• For the storage of pressurised gas cylinders.
• Type testing by MPA/TÜV SÜD according to DIN EN 14470-2, DIN EN 16121 and DIN EN 16122, EK5/AK4 09-10:2009 and AfPS GS 2014:01 PAK
• Mark of approval: GS/CE mark, high quality mark of approval by TÜV SÜD
Construction and colour:
• Outer carcass sheet steel, RAL 7035
• Doors sheet steel, RAL 3003
• Inner carcass of decor panels, RAL 7035 Fittings and features:
• Cylinder lock for safe access
• Roll-in flap with pitch
• Cylinder holder incl 4 retaining belts
• Fitting holder
• Exhaust air connection socket on the cabinet roof

Safety storage cabinets type G90 for pressurised gas cylinders
Optimum solution from DÜPERTHAL for the storage of pressurised gas cylinders with 90-minute fire protection.
• Width: 895 mm
• Depth: 610 mm
• Height: 2070 mm
• Weight: 480 kg
• Classical door technology (door handle).
• For the storage of pressurised gas cylinders.
• Type testing by MPA/TÜV SÜD according to DIN EN 14470-2, DIN EN 16121 and DIN EN 16122, EK5/AK4 09-10:2009 and AfPS GS 2014:01 PAK
• Mark of approval: GS/CE mark, high quality mark of approval by TÜV SÜD
Construction and colour:
• Outer carcass sheet steel, RAL 7035
• Doors sheet steel, RAL 3003
• Inner carcass of decor panels, RAL 7035 Fittings and features:
• Cylinder lock for safe access
• Roll-in flap with pitch
• Cylinder holder incl 3 retaining belts
• Fitting holder
• Exhaust air connection socket on the cabinet roof

Safety storage cabinets type G90 for pressurised gas cylinders
Optimum solution from DÜPERTHAL for the storage of pressurised gas cylinders with 90-minute fire protection.
• Width: 595 mm
• Depth: 610 mm
• Height: 2070 mm
• Weight: 350 kg
• Classical door technology (door handle), door hung right.
• For the storage of pressurised gas cylinders.
• Type testing by MPA/TÜV SÜD according to DIN EN 14470-2, DIN EN 16121 and DIN EN 16122, EK5/AK4 09-10:2009 and AfPS GS 2014:01 PAK Mark of approval: GS/CE mark, high quality mark of approval by TÜV SÜD
Construction and colour:
• Outer carcass sheet steel, RAL 7035
• Door sheet steel, RAL 3003
• Inner carcass of decor panels, RAL 7035 Fittings and features:
• Cylinder lock for safe access
• Roll-in flap with pitch
• Cylinder holder incl. 2 retaining belts
• Fitting holder
• Exhaust air connection socket on the cabinet roof

Safety storage cabinets type G90 for pressurised gas cylinders
Optimum solution from DÜPERTHAL for the storage of pressurised gas cylinders with 90-minute fire protection.
• Width: 595 mm
• Depth: 610 mm
• Height: 1415 mm
• Weight: 260 kg
• Classical door technology (door handle), door hung right.
• For the storage of pressurised gas cylinders.
• Type testing by MPA/TÜV SÜD according to DIN EN 14470-2, DIN EN 16121 and DIN EN 16122, EK5/AK4 09-10:2009 and AfPS GS 2014:01 PAK Mark of approval: GS/CE mark, high quality mark of approval by TÜV SÜD
Construction and colour:
• Outer carcass sheet steel, RAL 7035
• Door sheet steel, RAL 3003
• Inner carcass of decor panels, RAL 7035 Fittings and features:
• Cylinder lock for safe access
• Roll-in flap with pitch
• Cylinder holder incl. 2 retaining belts
• Fitting holder
• Exhaust air connection socket on the cabinet roof

Specially constructed for the storage of hazardous substances. Ideal solution for fire resistant storage of flammable liquids close to where they are needed - under the worktop. 90 minutes of fire protection.
• Width: 1400 mm
• Depth: 594 mm
• Height: 631 mm
• Weight: 232 kg
• One-hand and classical door technology (Push-to-open).
• For the storage of flammable liquids. Type testing by MPA/TÜV SÜD according to DIN EN 14470-1, DIN EN 16121 and DIN EN 16122, EK5/AK4 09-10:2009 and AfPS GS 2019: 01 PAK Mark of approval: GS/CE mark, high quality mark of approval by TÜV SÜD
Construction and colour:
• Outer carcass sheet steel, RAL 7035
• Doors sheet steel, RAL 1018
• Inner carcass of decor panels, RAL 7035 Fittings and features:
• Doors close automatically in case of fire
• Doors remain open in any position
• Cylinder lock for safe access
• Centre partition wall
• 2x 1 automatically extending pull-out tray sheet steel, RAL 7035
• 2x 1 perforated sheet insert, RAL 7035
• Exhaust air connection socket at the rear of the cabinet
• Visual inspection of the ventilation opening
• Earthing connection at the rear of the cabinet
• Interior fittings conductively connected with carcass
• Classical slotted base, RAL 7015

Specially constructed for the storage of hazardous substances. Ideal solution for fire resistant storage of flammable liquids close to where they are needed - under the worktop. 90 minutes of fire protection.
• Width: 1400 mm
• Depth: 594 mm
• Height: 631 mm
• Weight: 232 kg
• One-hand and classical door technology (door handle).
• For the storage of flammable liquids.
• Type testing by MPA/TÜV SÜD according to DIN EN 14470-1, DIN EN 16121 and DIN EN 16122, EK5/AK4 09-10:2009 and AfPS GS 2019: 01 PAK Mark of approval: GS/CE mark, high quality mark of approval by TÜV SÜD
Construction and colour:
• Outer carcass sheet steel, RAL 7035
• Doors sheet steel, RAL 1018
• Inner carcass of decor panels, RAL 7035 Fittings and features:
• Doors close automatically in case of fire
• Doors remain open in any position
• Cylinder lock for safe access
• Centre partition wall
• 2x 1 automatically extending pull-out tray sheet steel, RAL 7035
• 2x 1 perforated sheet insert, RAL 7035
• Exhaust air connection socket at the rear of the cabinet
• Visual inspection of the ventilation opening
• Earthing connection at the rear of the cabinet
• Interior fittings conductively connected with carcass
• Classical slotted base, RAL 7015

Specially constructed for the storage of hazardous substances. Ideal solution for fire resistant storage of flammable liquids close to where they are needed - under the worktop. 90 minutes of fire protection.
• Width: 1400 mm
• Depth: 594 mm
• Height: 631 mm
• Weight: 220 kg
• Push-to-open door technology
• Type testing by MPA/TÜV SÜD according to DIN EN 14470-1, DIN EN 16121 and DIN EN 16122, EK5/AK4 09-10:2009 and AfPS GS 2019: 01 PAK Mark of approval: GS/CE mark, high quality mark of approval by TÜV SÜD
Construction and colour:
• Outer carcass sheet steel, RAL 7035
• Doors sheet steel, RAL 1018
• Inner carcass of decor panels, RAL 7035 Fittings and features:
• Doors close automatically in case of fire
• Doors remain open in any position
• Cylinder lock for safe access
• Centre partition wall
• 2x 1 bottom tray sheet steel, RAL 7035
• 2x 1 perforated sheet insert, RAL 7035
• Exhaust air connection socket at the rear of the cabinet
• Visual inspection of the ventilation opening
• Earthing connection at the rear of the cabinet
• Interior fittings conductively connected with carcass
• Classical slotted base, RAL 7015

Specially constructed for the storage of hazardous substances. Ideal solution for fire resistant storage of flammable liquids close to where they are needed - under the worktop. 90 minutes of fire protection.
• Width: 1400 mm
• Depth: 594 mm
• Height: 631 mm
• Weight: 220 kg
• Classical door technology (door handle).
• Type testing by MPA/TÜV SÜD according to DIN EN 14470-1, DIN EN 16121 and DIN EN 16122, EK5/AK4 09-10:2009 and AfPS GS 2019: 01 PAK Mark of approval: GS/CE mark, high quality mark of approval by TÜV SÜD
Construction and colour:
• Outer carcass sheet steel, RAL 7035
• Doors sheet steel, RAL 1018
• Inner carcass of decor panels, RAL 7035 Fittings and features:
• Doors close automatically in case of fire
• Doors remain open in any position
• Cylinder lock for safe access
• Centre partition wall
• 2x 1 bottom tray sheet steel, RAL 7035
• 2x 1 perforated sheet insert, RAL 7035
• Exhaust air connection socket at the rear of the cabinet
• Visual inspection of the ventilation opening
• Earthing connection at the rear of the cabinet
• Interior fittings conductively connected with carcass
• Classical slotted base, RAL 7015

Specially constructed for the storage of hazardous substances. Ideal solution for fire resistant storage of flammable liquids close to where they are needed - under the worktop. 90 minutes of fire protection.
• Width: 1100 mm
• Depth: 594 mm
• Height: 631 mm
• Weight: 187 kg
• Push-to-open door technology.
• For the storage of flammable liquids.
• Type testing by MPA/TÜV SÜD according to DIN EN 14470-1, DIN EN 16121 and DIN EN 16122, EK5/AK4 09-10:2009 and AfPS GS 2019: 01 PAK Mark of approval: GS/CE mark, high quality mark of approval by TÜV SÜD
Construction and colour:
• Outer carcass sheet steel, RAL 7035
• Doors sheet steel, RAL 1018
• Inner carcass of decor panels, RAL 7035 Fittings and features:
• Doors close automatically in case of fire
• Doors remain open in any position
• Cylinder lock for safe access
• Centre partition wall
• 2x 1 automatically extending pull-out tray sheet steel, RAL 7035
• 2x 1 perforated sheet insert, RAL 7035
• Exhaust air connection socket at the rear of the cabinet
• Visual inspection of the ventilation opening
• Earthing connection at the rear of the cabinet
• Interior fittings conductively connected with carcass
• Classical slotted base, RAL 7015

Specially constructed for the storage of hazardous substances. Ideal solution for fire resistant storage of flammable liquids close to where they are needed - under the worktop. 90 minutes of fire protection.
• Width: 1100 mm
• Depth: 594 mm
• Height: 631 mm
• Weight: 187 kg
• Classical door technology (door handle).
• For the storage of flammable liquids.
• Type testing by MPA/TÜV SÜD according to DIN EN 14470-1, DIN EN 16121 and DIN EN 16122, EK5/AK4 09-10:2009 and AfPS GS 2019: 01 PAK Mark of approval: GS/CE mark, high quality mark of approval by TÜV SÜD
Construction and colour:
• Outer carcass sheet steel, RAL 7035
• Doors sheet steel, RAL 1018
• Inner carcass of decor panels, RAL 7035 Fittings and features:
• Doors close automatically in case of fire
• Doors remain open in any position
• Cylinder lock for safe access
• Centre partition wall
• 2x 1 automatically extending pull-out tray sheet steel, RAL 7035
• 2x 1 perforated sheet insert, RAL 7035
• Exhaust air connection socket at the rear of the cabinet
• Visual inspection of the ventilation opening
• Earthing connection at the rear of the cabinet
• Interior fittings conductively connected with carcass
• Classical slotted base, RAL 7015