All products

Liebherr MediLine laboratory fridges the ideal solution for a small footprint or for under-worktop integration. The range comprises two freestanding and under-worktop fridges with a glass door or a solid door. The precise electronic controller enables temperatures to be set accurately. The dynamic cooling system ensures high temperature consistency. Integrated alarm systems guarantee safe storage.
• External temperature and alarm documentation
The laboratory appliances are equipped with a volt-free contact for alarm forwarding to an external remote warning system, as well as with a serial interface RS 485 which enables central documentation of temperature profi les and alarm events. LTM documentation software is optionally available.
• Maximum temperature consistency
The dynamic cooling system in conjunction with the precise electronic controller ensures maximum temperature stability. All laboratory appliances are designed according to the EN 60068 -3 standard with regard to optimum temperature consistency
• Safety thermostat.
The appliances with electronic controllers are equipped with an additional safety thermostat to prevent temperatures dropping below +2°C and to protect sensitive products in the event of a fault.
• External temperature sensor
The laboratory appliances have an access port (diameter 10 mm) on the rear which allows the temperature sensor to be positioned in the interior.

Laboratory washer with glass door, with liquid dispensing, DryPlus, conductivity monitoring and monitoring package
• Construction type: Freestanding, can be builtunder, wide, with stainless steel lid, glass door
• Number of wash levels: 2
• Salt container in base of wash cabinet
• AutoClose – automatic door lock
• Buzzer, acoustic signal at end of programme
Control system
• Control type: M Touch Flex, full-touch colour display
• Programmable
• Programme sequence display, selectable display languages
Standard electrical connection
• Electrical connection: 3N AC 400V 50HZ
• Total rated load in kW: 9,30
Water connection/drainage
• Cold water [number]: 1
• Hot water [number]: 1
• DI water [number]: 1
• Required flow pressure in kPa: 200-1000
Drying unit
• Air throughput in m³/h: 60
• HEPA filter class H14, HEPA filter filtration efficiency (in accordance with DIN EN1822) in %: 99,99
• Heat dissipation into the room in MJ/h: 5,40
Features
• 1 dispenser pump for liquid cleaning agent
• 1 dispenser pump for neutralising agent
• Convenient suction lance DC5
• Additional integrated dispensing pump 5–10 l (optional)
• Suction lance for media canisters 10–20 l (optional)
• Spray pressure and spray arm monitoring
• EcoDry - Convenient drying support
• Setting options for process chemicals (3 x 5 l / 2 x 10 l)
• Chamber lighting
• Variable-speed heater pump
• Wash cabinet made from high-quality stainless steel (1.4301/304)
Connection options
• External dispensing modules

The Binder KBF 470 climate chamber, with its extended temperature and humidity range, combined with the Binder LED light module, can be easily adapted for plant growth applications. The system provides precise control throughout all growth stages, featuring three independent light channels and real-time programming options to perfectly meet the unique needs of plants.

Package contents

Binder KBF 470 standard climate chamber with extended temperature and humidity range

• Temperature range: +20°C to +50°C
• Humidity range: 20% to 50% relative humidity (RH)
• Proven APT.line™ preheating chamber technology
• Up to 40% lower energy consumption compared to the previous model
• Energy-efficient cooling with modern inverter cooling unit
• Cooling with environmentally friendly R-600a refrigerant
• Door heating to prevent condensation
• Adjustable fan speed
• Humidity control with capacitive humidity sensor and rapid steam humidification
• Housing design with HIT technology
• Stainless steel interior
• Interior doors made of safety glass with metal oxide coating
• Two stainless steel shelves
• Large access port with silicone plug
• Floor-standing design with sturdy twin casters and front brakes
• Stackable desktop models, up to 130 liters in capacity
• Intuitive touch-screen controller with time-segmented and real-time programming
• Internal data logger, measured values can be read in open format via USB
• Independent Class 3.3 temperature safety device (DIN 12880) with visual and acoustic alarms
• Device self-test with comprehensive status analysis
• Data interfaces: Ethernet, USB
• BINDER Multi Management Software APT-COM™ basic version

Binder light module for plant growth

• 16 LED light strips with mounting clips
• Lighting control unit with program controller, power supply, and fresh air pump
• Mounting rails and screws for securing the lighting control unit
• Special silicone foam plugs for sealing the access port
• Cabling

Control unit functions
• Three light channels, individually adjustable from 10% to 100%
• Real-time programming
• Twilight function
• Ventilation function

Includes:

• Magnetic stirrer Hei-PLATE Mix'n'Heat Expert (145 mm diameter)
• Temperature sensor Pt1000
• 1 L Heat-On Blocks
• Findenser™

The Hei-PLATE Mix'n'Heat Expert (145 mm diameter) magnetic stirrer provides fast and precise heating, while the Pt1000 temperature sensor enables accurate temperature regulation. The 1-liter Heat-On unit ensures optimal heat transfer without the need for water or oil. The Findenser™ complements the system as a high-performance condenser that operates without the use of water. Its performance is optimal for solvent volumes up to 1 liter.

High-performance ultrasonic cleaner for versatile applications

The proven and particularly robust SONOREX ultrasonic baths clean thoroughly and gently by means of intensive cavitation bubbles, even in the hard-to-reach places of the cleaning objects.

A user-friendly rotary handle control is used for easy adjustment of the cleaning time. Matching baskets, lids and cleaning and disinfection concentrates are available as accessories for optimally coordinated ultrasonic cleaning.

The SONOREX TECHNIK range currently consists of 4 series with common characteristics:

• welded stainless steel cleaning tank, 2 mm
• overflow gutter: combined with an oil separator and or a filtering system to continuously remove dirt, oils and grease floating on the surface of the tank
• cleaning fluid filling level mark, facilitates dosing
• welded drain with three-way ball valve for emptying or filling the tank and connecting a filtration system
• additional drain for connecting an oil separator and draining the overflow gutter
• heating: all models are available with (UH) or without (U) heating: on / off with control indicator, thermostatic, adjustable from 30 to 80 ° C
• case protected against drops of water in stainless steel
• for baskets, possibility of having a motorized lift with agitation function
• possibility of making sets of 2 to 5 stations with ultrasonic bath, rinsing bath, drying tank with a motorized translator / elevator / agitator
• inclined tank bottom for better cleaning results by optimal sound propagation. This facilitates the emptying of the tank and makes it possible to avoid as much as possible the accumulation of dirt and residual liquids at the bottom of the tank
• ultrasound: on / off with control indicator, timer 1 to 15 min. or continuous operation
• 40 kHz frequency generator (built-in)

Hei‐PLATE Mix'n'Heat Core+ and Pt 1000 (V4A) + Pt 1000 clamping system

Includes: Magnetic stirrer Hei-PLATE Mix 'n' Heat Core+ (135 mm diameter) - Fast and precise heating - Without overshoot - For sample-friendly work, Pt1000 temperature sensor for precise temperature regulation, Pt1000 holder with cable device for securely attaching the temperature sensor and silicone protective cover for a longer lasting protection of your magnetic stirrer.
The magnetic stirrer Hei-PLATE Mix 'n' Heat Core+ offers you a digital display for setting your desired temperature to the degree. This precise temperature without overshooting is controlled by two selectable heating modes (FAST/PRECISE) and the optional external temperature sensor Pt1000.

It convinces with its robust design and its sophisticated functionalities, such as its key and knob illumination, which provides information about active functions at any time. The dynamic rotary knobs respond to turning speed - slow for precise adjustments, or fast for bigger jumps. The locking function protects against accidental changing of the values. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures > 50 °C, protect against burns. A carrying aid on the underside ensures safe transport.

• Circular scratch-resistant, chemical-resistant mixing plate with Kera-Disk coating
• Plate diameter ø: 135 mm
• Temperature range: 20 – 300 °C
• Heating power: 800 W
• Rotation speed range: 100… 1400 rpm
• Accuracy temperature setting: ± 1 K
• Speed accuracy: ± 2 %
• Max. stirring capacity (H₂O): 20 l
• The appliance has a residual heat indication
• Maximum load: 25 kg
• Protection class IEC 60529: IP 42

One way mixed bed ion exchange resin for polishing process water to achieve demineralized water quality.

The new BSC with Centurion Touchscreen controller is EN 12469-certified and now available in 200 mm (8"") opening, with standby height that easily activates standby mode.

Labculture® Plus G4 (LA2-E-EU G4) ergonomic work zone is comprised of bright illumination using industry-leading dimmable LED lamp combined with raised, durable, stainless-steel armrest and autoclavable, multi-piece work zone devised for optimum work comfort.

Product features:

Centurion Touchscreen Controller
• Intuitive, comprehensive, and easy-to-understand
• Virtually comprehensible safety information and cabinet alarms via 3D BSC diagram
• Defined details of alarm types with clear instructions for proper intervention
• Centered and angled down for easy reach & viewing
• Selectable Quickstart mode for fast operation

Dimmable LED
• Adjustable work zone brightness
• Ideal light intensity of 1000 lux
• Saves energy and optimizes work comfort

Ergonomic Features
• 200 mm (8"") sash opening
• Frameless, shatterproof, and UV-absorbing tempered glass
• Motorized window
• Aerosol tight window seal

Tiltable Sash
• For easy cleaning of the inner sash glass

USB Port and Remote Modbus
• USB port to access cabinet data log and BMS connectivity
• Newly integrated Remote Modbus feature for users to securely access the cabinet remotely from external devices.

Cabinet Construction
• E Series: - Tempered Glass Side walls - increases visibility and prevents the operator from experiencing a ""boxed-in"" feeling Multi-piece work tray, autoclavable.
• Tempered Glass Side walls - increases visibility and prevents the operator from experiencing a ""boxed-in"" feeling
• Multi-piece work tray, autoclavable

Green Product
• Equipped with energy-efficient Dual DC ECM that allows up to 70% energy savings vs AC motor
• Extremely low energy consumption
• Standby mode allows reduced power consumption

ULPA Filter
• 10x filtration efficiency compared to the HEPA filter
• Creates ISO Class 3 work zone instead of industry-standard, ISO Class 5
• Same 10 years filter life and replacement cost as HEPA filters

Isocide™ Antimicrobial Powder Coating
• Eliminates 99.9% of surface bacteria within 24 hours of exposure

Technical data:
• Average airflow velocity: inflow 0.45 m/s, downflow 0.32 m/s
• Usable work area: 0.76 m2

The Binder KBF 720 climate chamber, with its extended temperature and humidity range, combined with the Binder LED light module, can be easily adapted for plant growth applications. The system provides precise control throughout all growth stages, featuring three independent light channels and real-time programming options to perfectly meet the unique needs of plants.

Package contents

Binder KBF 720 standard climate chamber with extended temperature and humidity range

• Temperature range: +20°C to +50°C
• Humidity range: 20% to 50% relative humidity (RH)
• Proven APT.line™ preheating chamber technology
• Energy-efficient cooling with modern inverter cooling unit
• Cooling with environmentally friendly R-600a refrigerant
• Door heating to prevent condensation
• Adjustable fan speed
• Humidity control with capacitive humidity sensor and rapid steam humidification
• Housing design with HIT technology
• Stainless steel interior
• Interior doors made of safety glass with metal oxide coating
• Two stainless steel shelves
• Large access port with silicone plug
• Floor-standing design with sturdy twin casters and front brakes
• Stackable desktop models, up to 130 liters in capacity
• Intuitive touch-screen controller with time-segmented and real-time programming
• Ergonomically adjustable control terminal (for devices 470 liters or larger)
• Indicator triangle with illuminated status display (for devices 470 liters or larger)
• Internal data logger, measured values can be read in open format via USB
• Independent Class 3.3 temperature safety device (DIN 12880) with visual and acoustic alarms
• Device self-test with comprehensive status analysis
• Data interfaces: Ethernet, USB
• BINDER Multi Management Software APT-COM™ basic version

Binder light module for plant growth

• 16 LED light strips with mounting clips
• Lighting control unit with program controller, power supply, and fresh air pump
• Mounting rails and screws for securing the lighting control unit
• Special silicone foam plugs for sealing the access port
• Cabling

Control unit functions
• Three light channels, individually adjustable from 10% to 100%
• Real-time programming
• Twilight function
• Ventilation function

Work space in laboratories must be used efficiently.
The Omnia xs system frees up space on the lab bench and makes work more efficient. Despite the extremely compact design in xs format, the system is exemplary in its resource-saving and completely autonomous operation. Accessories such as a leakage sensor, pressure reducer, and pre-treatment cartridges are already integrated in the compact housing. This saves space in the laboratory and also ensures exceptional operational and work safety.
OmniaTap xs touch is the ideal system when both pure water and ultrapure water are required, but in relatively small amounts. The ability to provide both types from a single system results from the combination of ultramodern purification technologies. These also make it possible to connect the system directly to tap water. A press on the dispenser button activates dispensing of ultrapure water type I via the digital dispenser control. The recirculation of the pure water held in the installed 7 litre tank keeps it permanently at type II quality. The pure water tank provides a second outlet for feeding downstream end users. A pure water storage tank is required to operate the OmniaTap devices, which can be ordered separately.

Features
• OptiFill touch dispenser is standard
• Spent filters are simply and quickly exchanged
• Leakage sensor is standard
• Integrated pressure reducer is standard
• Precise volume control
• Ready-to-use, including filter cartridges

Laboratory dishwasher with liquid dispensing & hot air drying DryPlus
• Construction type: Freestanding, can be builtunder, slimline
• Casing: Stainless Steel
• In-door salt container
• AutoClose – automatic door lock
• Buzzer, acoustic signal at end of programme
Control system
• Control type: M Touch Flex, full-touch colour display
• Programmable
• Programme sequence display, selectable display languages
Standard electrical connection
• Electrical connection: 3N AC 400V 50HZ
• Total rated load in kW: 9,30
Water connection/drainage
• Cold water [number]: 1
• Hot water [number]: 1
• DI water [number]: 1
• Required flow pressure in kPa: 200-1000
Drying unit
• Air throughput in m³/h: 60
• HEPA filter class H13, HEPA filter filtration efficiency (in accordance with DIN EN1822) in %: >99,95
• Heat dissipation into the room in MJ/h: 5,40
Features
• 1 dispenser pump for liquid cleaning agent
• Suction lance for media canisters 10–20 l (optional)
• DS5 Flex suction lance
• Spray pressure monitoring
• DryPlus - Efficient hot air drying
• Chamber lighting
• Variable-speed heater pump
• Wash cabinet made from high-quality stainless steel (1.4301/304)
Connection options
• External dispensing modules

The proven specialist for reliable ICH stability tests in the pharmaceutical industry: the KBF masters all long-term tests, accelerated tests and stress tests. It fulfills all important ICH requirements, from precision to programming and documentation. With flexible water supply options for all installation locations. In addition, the new KBF consumes up to 40 % less energy than its predecessor. With optional light modules, the KBF can be converted into an ICH photostability chamber and a plant growth chamber.

Product features

• Temperature range: 0°C to +70°C
• Humidity range: 10% to 80% RH
• Proven APT.line™ preheating chamber technology
• Up to 40% lower energy consumption compared to the previous model
• Energy-efficient cooling with modern inverter cooling unit
• Cooling with climate-neutral R-600a refrigerant
• Door heating to prevent condensation
• Adjustable fan speed
• Humidity regulation with capacitive humidity sensor and responsive steam humidification
• Housing design with HIT technology
• Stainless-steel inner chamber
• Inner doors made of metal oxide-coated safety glass
• Two racks made of stainless steel
• Large access port with silicone plug
• Floor-standing units featuring robust twin casters with brakes at the front
• Stackable tabletop units with a volume of up to 130 liters
• Intuitive touchscreen controller with time-segment and real-time programming
• Ergonomically adjustable control terminal (for units with a volume of 470 liters and above)
• Signal triangle with light-up status display (for units with a volume of 470 liters and above)
• Internal data logger, measured values can be read out in open format via USB Class 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarms
• Unit self-test for comprehensive status analysis
• Data interfaces: Ethernet, USB
• BINDER Multi Management Software APT-COM™ basic edition
• Optional light modules for ICH photostability testing (for models 260, 470, 720)
• Optional LED light modules for plant growth (for models from 260)

The powerful virtuoso in cooling incubators for microorganisms: KB units are able to incubate with exceptional precision even when fully loaded, feature a hot-air disinfection routine, and can be programmed for weekend operation with ease. The new KB unit consumes as much as 40% less energy than the previous model.

IMPORTANT FEATURES

• Temperature range: 0°C to +70°C
• Proven APT.line™ preheating chamber technology
• Up to 40% lower energy consumption compared to the previous model
• Energy-efficient cooling with modern inverter cooling unit
• Cooling with climate-neutral R-600a refrigerant
• Door heating to prevent condensation
• Housing design with HIT technology
• Interior made completely of stainless steel
• Inner doors made of metal oxide-coated safety glass
• Two racks made of stainless steel
• Large access port with silicone plug
• Floor-standing units featuring robust twin casters with brakes at the front
• Stackable tabletop units with a volume of up to 130 liters
• Simple programming of a second set temperature value
• Internal data logger, measured values can be read out in open format via USB
• Class 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarms
• Unit self-test for comprehensive status analysis
• Data interfaces: Ethernet, USB

The Sigma 2‑7 Cyto combines the highlights of the Sigma 2‑7 laboratory centrifuge with state-of-the-art cytology centrifugation. This compact centrifuge excels in cytology labs with its perfectly matched accessories for the gentle and quiet depositing of cells on specimen slides and the possibility of repurposing the centrifuge for cell harvesting or processing of blood collection tubes. Along with saving space in the lab, this is a boon in economic terms.

It is ideal for gentle centrifugation in cytology labs to transfer cells to specimen slides for morphological assessment under the microscope. Cytodiagnostics, in which cells from bodily fluids or organs are subjected to microscopic examination to detect malignant cell changes, for example as part of cancer treatment, is a crucial application area for the Sigma 2‑7 Cyto.

What makes the Sigma 2‑7 Cyto so attractive?
This versatile benchtop centrifuge features barely audible running noise, a blue LED running indicator, ten program memory locations, and the availability of two curves each for braking and acceleration. Cytology rotors for the preparation of thin-film cell specimens and other swing-out rotors for cell harvesting or the preparation of blood collection tubes can be used.

Up to twelve specimens can be processed at the same time in the closed cytology rotors. There is a choice of cytology rotors designed for the RESOSPIN® clip system or the Shandon™ clip system. The cytology rotors can be autoclaved and have outstanding safety features for users and the centrifuge. The closed portable rotor protects the user before, during and after centrifugation of the specimens and allows loading in a laboratory fume cupboard or on a bench.

In addition, the available swing-out rotors and extensive accessories can accommodate tubes and flasks from 1.5 ml to 100.

Applications: Pathology, Hospitals

As the big sister of the Sigma 1‑14, the Sigma 1‑16 microcentrifuge stands out with its space-saving design, high-quality finishing and excellent performance characteristics.

The extensive range includes rotors for PCR strips, filter tubes and 2 ml or 5 ml microlitre tubes, and a rotor for centrifuging microhaematocrit capillary tubes. Its strong performance and range of rotors make the Sigma 1‑16 ideal for microbiological and protein biochemistry applications and clinical chemistry applications.

What makes the Sigma 1‑16 microcentrifuge so attractive?

The Sigma 1‑16 features RCF values greater than 20,600 x g, short acceleration and braking times, a high-grade stainless steel bowl, and a motorised lid lock for effortless closing. Further highlights include the ability to store ten standard programs, a closable biosafe rotor with a capacity of 36 x 2 ml, and a rotor for 12 x 5 ml test tubes.

Product options:
IVD
Centrifuge package with 24 x 2 ml PP rotor
Biosafe 36 x 2 ml rotor

Applications: Hospitals, Veterinary clinics, Food labs, Universities & colleges, Pharmaceutical labs, Cell culture labs

The Sigma 1‑16 is also available as the Sigma 1‑16K refrigerated centrifuge and as an IVD model.

Laboratory refrigerators and freezers are expected to provide the highest levels of safety and reliability. Precise electronic control, fan-assisted cooling, and highly efficient insulation result in outstanding energy efficiency, ensuring low operating costs and environmental protection. Advanced components and precise regulation ensure optimal storage of materials.

Product Features

• Fan-assisted cooling system
• Automatic defrost
• Temperature range: 0 °C to +16 °C
•
Easy Operation

• Built-in handle along the full height of the door
• 2.4” color electronic control panel with touch & swipe function
• Easy-to-clean stainless steel interior lining
• Flush-mounted interior lighting (vertical, full-height side LED lighting)

Safety and Reliability

• Temperature stability up to: ±3 °C
• VCC variable speed compressor
The variable-speed compressors always provide the appropriate performance. This results in reduced energy consumption and increased temperature stability.
• Warning signal in case of malfunction: optical and acoustic
• SafetyDevice: prevents the temperature from dropping below +2 °C to avoid freezing
• PT1000 product temperature sensor
In addition to the built-in control sensor, another temperature sensor is available for measuring the simulated product temperature. The value measured by the product temperature sensor can be displayed on the screen, calibrated, and used as the reference for the device's alarm function, ensuring safer storage based on real product temperature values.
• Power failure alarm
In case of a power outage, the built-in battery maintains power for at least twelve hours and immediately activates an audible and visual alarm. Additional indication of when the power outage started and the maximum temperature reached.
• LightAlarm
In case of uncontrolled temperature rise, a door left open, or another issue, the internal lighting of the device starts to flash.
• Alarm history: Easy quality control
Logging important data from the last 10 alarms (e.g., date or maximum temperature) for the final quality assessment of stored goods.
• Built-in data logger: Trackable for years
Complete traceability independent of monitoring systems with up to 5 years of logging for temperature profiles, alarm history, and service information. Stored data can be retrieved via the USB port.
• The door automatically closes if opened at less than a 90° angle.
• Probe access: 1 x Ø 12 mm
• Electronic locking system: Protects against unauthorized access with locking/unlocking via PIN code or remote control.
• SmartLock: Automatic door locking in case of temperature alarm, only accessible by authorized personnel.
• Long lifespan

Compliance and Documentation

• DIN 13277 and IEC 61010-2-011 compliance
Liebherr laboratory and pharmaceutical refrigeration units meet all the features and performance criteria necessary for full compliance with DIN 13277. This standard defines requirements and test procedures for cooling and freezing equipment used in laboratories and for drug storage.
• Temperature distribution and consistency according to IEC 60068-3
• Safety according to IEC 61010-2-011
• Temperature setting (calibration)
• Logging of minimum/maximum temperature values
• Integrated connectivity (LAN or WiFi for BMS or SmartMonitoring systems)

Technical Data

• Gross/net volume: 642/480 L
• External dimensions (W/D/H) mm: 697/867/2135
• Internal dimensions (W/D/H) mm: 489/638/1470
• White, stainless steel exterior casing
• Door/Cover material: insulated glass
• Adjustable shelves: 4
• Shelf material: steel with plastic coating
• Usable shelf size (W/D) mm: 480 / 638
• Shelf load capacity: 60 kg
• Door opening direction: right, reversible
• Castors with arrestor at the front, fixed castors at the rear
• Gross/net weight: 169/152 kg
• Energy consumption/year: 317 kWh
• Ambient temperature: +10 °C to +35 °C
• Heat emission: 365 kJ/h
• Refrigerant: R 600a
• Noise level: 60 dB(A)
• Frequency/voltage: 50/60 Hz / 220-240 V~

Each package contains a telescopic stand and a corresponding clamp to ensure ideal, ergonomic use on laboratory benches. In addition to that, we offer you two accessory parts that are meant to increase your own safety at work: the stirrer shaft guard and the beaker holder.

Included package components:
• Hei-TORQUE Ultimate 400
Speed range (rpm): Gear I 10 - 400; Gear II 20 - 2000
Max. torque (Ncm): 400
Volume H2O max. (l): 100
Viscosity up to (mPa s): 250000
• Telescopic stand
• Clamp
• Shaft guard
• Beaker holder

For the storage of lithium-ion batteries
• Type-tested by MPA/ TÜV SÜD according to DIN EN 14470-1, DIN EN 16121, DIN EN 16122, and DIN 31000 Loss prevention in terms of VdS 3103 Mark of approval: Safety tested and CE mark
• Outer WxDxH: 1194x612x2045 mm
• Supply voltage: no charging system
• Outer carcass sheet steel, RAL 7035
• Doors sheet steel, PANTONE 389 C
• Inner carcass decor panels, RAL 7035

Fittings and features:
• Doors remain open in any position
• Doors close automatically in case of fire
• Cylinder locks for access security
• Backdraftlock after inside fire
• Bottom tray sheet steel, RAL 7035
• 4 storage levels sheet steel, RAL 7035
• 2 storage area per storage level
• Exhaust air connection on the cabinet roof
• Visual inspection of the ventilation opening
• Monitoring (mechanical) at the backdraft lock, prepared for DÜPERTHAL connect
• Switch contact (potential-free)
• Earthing connection on the cabinet roof
• interior fittings grounded to carcass
• Adjustable feet for level adjustment
• Set-back base, RAL 7015

FVG – VERTICAL LAB STERILIZER
A COMPACT AND ERGONOMIC CHOICE.
• Applications: Bio-Pharmaceutical, Microbiology
• Loads: Sealed & unseald containers, Machine parts, Tools, Culture Media, Glassware
• Processes: Sterilization
• Useful chamber capacity: 50, 75,140 liters
FVG Vertical Lab Sterilizer combines excellent performances with overall high quality materials, simplicity of use and optimal consumption.
All FVG series autoclaves are equipped with a built-in steam generator with automatic water feed pump. These autoclaves can treat a wide range of laboratory goods with reliable sterilization technology, such as: glassware and plastic articles, unwrapped instruments, machine parts and components, porous goods, culture media and liquids in open small size containers, laboratory regular waste in open bags.
The FVG series sterilizers are suitable for the sterilization and decontamination in many different laboratory sectors as:
Private and public microbiology labs.
High schools and universities.
Research institutes.
Life science and biotech labs.
Please, click on the image “recommended kit” to check out all possible configurations referred to FVG series.
DESIGN AND TECHNICAL FEATURES
FVG series can be provided in three different chamber useful volumes: 50 liters (FVG1) – 75 liters (FVG2) – 140 liters (FVG3).
Sterilization chamber and lid are made of 316L stainless steel, with mirror polished sanitary finishing. FVG operates at high-pressure (3,5 bar g) and temperature (140°C).
Exclusive horizontal swiveling lid with pneumatic gasket “rotate-and-seal”, for improved user safety. FVG is equipped with a heat recovering system for water preheating to steam generator, assuring utilities cost saving.
FVG has TSC 09 microprocessor control system with graphic color LCD display and an exclusive dual sensor system, by pressure and temperature, for double regulation and control of the sterilization process.
KEY BENEFITS
• Ergonomically designed chamber for maximizing loadable capacity.
• Quick connections to all utilities for easy handling and installation.
• Timed free steaming with pulses for effective air removal.
• 14 free configurable automatic programs.
• Multilevel passwords protected key-users access to ensure process safety.
• Set of four castors for easy moving and installation in lab room.
• GLP compliance
COMPLIANT TO
• PED Directive 2014/68/UE – Pressure equipment
• Machine Directive Macchine 2006/42/EC
• EMC Directive 2014/35/UE
• LVD Directive 2006/95/UE

Optimally designed as space-saving solution to be used with a large-scale evaporator and other peripheral devices: this compact undercounter chiller can be perfectly placed among one of our Hei-VAP Industrial models. The power supply of the rotary evaporator is ensured by a power socket at the rear of the chiller. Moreover and despite its small footprint, this chiller also provides space for a vacuum pump and mounting possibilities for the automatic module Hei-VOLUME Distimatic Pro.

At the same time, with its cooling capacity of up to 5 kW, this recirculation chiller is extremely powerful. It has a large reservoir being particularly useful for peak loads, and a high flow rate. It is suitable even for demanding liquids like low-boilers and continuous evaporation, combined with the automatic module Hei-VOLUME Distimatic Pro.

Technical data

• Dimensions (W × H × D): External dimensions [W×D×H] 1100 x 730 x 730 mm | Installation dimensions [WxD] 1100 x 950 mm
• Working temperature range: -10°C to +40°C
• Cooling capacity: at 20°C: 5000 W | at 10°C: 3100 W | at 0°C: 2100 W | at -10°C: 900 W
• Circulation pump Flow rate [max.] 40 l/min | Flow pressure [max.] 3,0 bar
• Coolant tank: 28 liter
• Permitted ambient temperature range: 5°C to 40°C
• Max. operating pressure: 18 bar
• Protection class (EN 60529): IP20
• Acoustic pressure: 62,5 dB(A) [distance 1m]