All products

Steam condenser for optimal dehumidification and cooling of the air outlet.
• Can only be used with a drying unit
• Option to connect to the on-site cooling water circuit

Machine affiliation: Can be used for PLW 8617 devices.

Mobile unit for optimum loading of laboratory glassware on the lowest level.
• Area of application: reprocessing laboratory glassware
• Maximum loading width: 470 mm
• Maximum loading depth: 490 mm

Machine affiliation: Can be used for PLW 6111 devices.

Wall fitting for the manual production of demineralised water.
• Pressurised to 10 bar
• Complete with pressure hose 150 cm

Injector nozzle with plastic supports, Ø 3, length 110 mm.
• Area of application: reprocessing laboratory glassware
• Suitable for measuring flasks and test tubes, for example
• Suitable for standard mobile injector units and injector baskets

Machine affiliation: Can be used for PG 8583, PG 8583 CD, PG 8593 devices.

To raise the machine incl. side unit.
• 60 cm deep, 90 cm wide.
• For use in Aqua Purificator PG 8595 and DOS cabinet PG 8596

Machine affiliation: Can be used in PG 8504, PG 8583, PG 8593 devices.

For optimum loading of 210 slides.
• Area of application: reprocessing laboratory glassware

For the optimum loading of wide neck flasks, measuring cylinders, etc.
• Area of application: reprocessing laboratory glassware
• Equipped with 26 small spring hooks x 105 mm height
• The distance between the spring hooks is approx. 60 mm

For loading different utensils.
• Area of application: reprocessing laboratory glassware
• Suitable for beakers, funnels, breast milk pumps, for example
• With flexible handles

For the optimum loading of up to 98 pipettes.
• Area of application: reprocessing pipettes/vials
• Suitable for 98 measuring and full pipettes, for example
• Height of holding frame 150 mm

It can be used in the lower basket A 150.

For optimum loading of laboratory glassware – can be equipped with 8 nozzles.
• Area of application: reprocessing laboratory glassware
• Suitable for lab. glassware incl. Erlenmeyer and round flasks.
• Equipped with 4 A 840 nozzles and 4 A 841 nozzles
Size of A 840 injector nozzle: Ø 6 mm, height 130 mm
Size of A 841 injector nozzle: Ø 6 mm, height 210 mm
• Part of the EasyLoad system. The EasyLoad system makes reprocessing laboratory glassware considerably faster, simpler and more reliable. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as height adjustment of the holders is no longer necessary thanks to the smart combination of nozzles and holding frames. This makes correct positioning extremely easy.
• Nozzle spacing 118 mm across the width, 118 mm across the depth

For the optimum loading of injector modules or inserts.
• Area of application: reprocessing pipettes/vials, laboratory glassware, butyrometers, measuring cylinders
• Lower basket with two module connections
• for holding up to 2 injector modules or inserts
• Automatic closing of the connections when not in use
• Clearances: width 494, length 440 mm

Machine affiliation: Can be used in PG 8504, PG 8583, PG 8583 CD, PG 8593 devices.

Description
The BioChem-VacuuCenter BVC basic is designed for connection to an existing external vacuum source like a diaphragm pump or a vacuum network (e.g., VACUU•LAN®) and does not require electric power. The chemical-resistant mechanical vacuum controller always ensures an optimal operating vacuum. The controller opens only when needed thus limiting the gas load on the vacuum source. The evaporation of collected liquid is minimized. The inlet tubing integrated in the bottle head reduces aerosol and foam formation and ensures a long service life of the hydrophobic protection filter. The aspiration system is available either as BVC basic with 4l PP bottle or as BVC basic G with 2l coated borosilicate glass bottle.
Performance features
• mechanical vacuum regulator and integrated check valve to provide optimum working vacuum and minimize the vapor load on the vacuum network
• stable base and electricity-free operation for convenience
• autoclavable collection bottle designed to reduce aero­sol and foam formation; autoclavable quick-couplings available as accessory
• aspiration hand set VacuuHandControl (VHCpro) with flow-through suction tube - no contamination of handle by aspirated media
• hydrophobic 0.2 µm sterilizable filter - contamination risks for the vacuum pumping system are greatly reduced; autoclavable as complete unit together with the collection bottle

While others rely on traditional PSC motors, the Esco Airstream® Gen 3 Vertical Laminar Flow Cabinet is the only vertical-type clean bench in the market that uses Direct Current Electronically Commutated Motor (DC ECM) technology. Reducing energy costs by up to 70%, these clean benches are the greenest ones yet.
The secret to achieving energy savings through ECM technology lies in its high electrical efficiency and ability to run precisely on programmed speeds. Enjoy low heat and noise emission as well with the Esco Airstream® Gen 3 Vertical Laminar Flow Cabinet.
Esco's laminar air flow cabinet is a product of robust engineering combined with strategic ergonomic design. It provides long-term reliability and ultimate user comfort making it ideal for non-hazardous applications that need a sterile environment
Applications:
• Microbiology (non-pathogenic)
• Forensics
• Sterile product compounding
Features
• High-Quality Construction
Stainless steel worktop
Spill-retaining design will ensure containment of accidental liquid spills
• Quiet Operation
Comfortable low noise at 52 dBA
Reduce fatigue and improve work concentration
• ULPA Filter
10x Filtration efficiency of HEPA filter Creates ISO Class 3 work zone instead of industry-standard ISO Class 5
• Energy-efficient
Powered by latest generation DC ECM blower, that is more efficient than legacy ECM and VFD motors
70% Energy savings compared to AC motor
Stable airflow, despite building voltage fluctuations & filter loading
• Isocide™ Antimicrobial Powder Coating
Eliminates 99.9% of surface bacteria within 24 hours of exposure

Airstream® Gen 3 Vertical Laminar Flow Cabinet
While others rely on traditional PSC motors, the Esco Airstream® Gen 3 Vertical Laminar Flow Cabinet is the only vertical-type clean bench in the market that uses Direct Current Electronically Commutated Motor (DC ECM) technology. Reducing energy costs by up to 70%, these clean benches are the greenest ones yet.
The secret to achieving energy savings through ECM technology lies in its high electrical efficiency and ability to run precisely on programmed speeds. Enjoy low heat and noise emission as well with the Esco Airstream® Gen 3 Vertical Laminar Flow Cabinet.
Esco's laminar air flow cabinet is a product of robust engineering combined with strategic ergonomic design. It provides long-term reliability and ultimate user comfort making it ideal for non-hazardous applications that need a sterile environment
Applications:
• Microbiology (non-pathogenic)
• Forensics
• Sterile product compounding
Features
• High-Quality Construction
Stainless steel worktop
Spill-retaining design will ensure containment of accidental liquid spills
• Quiet Operation
Comfortable low noise at 52 dBA
Reduce fatigue and improve work concentration
• ULPA Filter
10x Filtration efficiency of HEPA filter Creates ISO Class 3 work zone instead of industry-standard ISO Class 5
• Energy-efficient
Powered by latest generation DC ECM blower, that is more efficient than legacy ECM and VFD motors
70% Energy savings compared to AC motor
Stable airflow, despite building voltage fluctuations & filter loading
• Isocide™ Antimicrobial Powder Coating
Eliminates 99.9% of surface bacteria within 24 hours of exposure

Orbital shaken bioreactor for single-use bags

The SB50-X is an orbital shaken bioreactor for the cultivation of human, mammalian and plant cells in a single-use bag. A working volume from 15 litres up to 50 litres for the SB50-X ensures easy scale-up from microtiter plates to shaking flasks and all the way up to 200 litres. The SB50-X can be used in research, process development or production.
The SB50-X was developed and tested in collaboration with ExcellGene SA (Monthey, Switzerland) and the Swiss Federal Institutes of Technology EPFL (Lausanne, Switzerland).

Performance characteristics

• Large capacity (50L working volume)

• Single use bioreactor system

• Cultivation of human, mammalian and plant cells

• Fast, simple set up

• Easy scale-up

• Online measurement of pH and DO

Single-use bag for fast and simple set up
The cylindrical vessel accepts a single-use bag. This bag requires no additional mixing device, enables quick set up times and eliminates elaborate cleaning and sterilising procedures. Various ports are incorporated to allow feeding, inoculation, harvesting and sampling. The bag has built in optical sensors for pH and DO.

Orbital motion
The orbital motion of the SB50-X ensures efficient liquid mixing. It allows high oxygen transfer rates with low shear forces. Mechanical stress on the cells is reduced thanks to bubble-free surface gassing with almost no frothing. This motion is particularly suitable for microcarrier cultivation. The SB50-X uses the unique Kuhner direct drive which provides accurate control of the orbital speed.

Trouble free scale-up
The SB50-X fills a gap in the scale-up chain from microtiter plates all the way up to 200 litres. The consistent hydro-dynamics of shaken bioreactors provide reproducible cultivation conditions throughout the volume range. The culture from the SB50-X can also serve as preculture or inoculum for the SB200-X.

Control unit and online measurement
The bespoke control unit, designed by Kuhner, uses the latest touch-screen technology and Kuhner Insight software for data recording, calibration, programming and controlling. Technical controls for 21 CFR Part 11 compliance are built into the software.
The SB50-X can be heated or cooled. Temperature ramps are easily programmed and processed.
Online measurement of each parameter (dissolved oxygen and pH-value in the medium) is available.

Pumping system
The control unit incorporates two small and one big peristaltic pump. This enables simple regulation of the pH value, feeding and the transfer of the culture media (scale-up or processing).

Gas mixing
The SB50-X has an integrated gas mixing device (FlowCon).
Whether stabilizing the pH with CO2, or preventing low dissolved oxygen concentrations, the gas mixer meets all user needs. Four mass flow controllers ensure highly accurate and reproducible gas mixing. An integrated pressure sensor prevents over pressure in the bioreactor by reducing the gas flow in the first step (1. limit) and shutting off the gas flow in the second step (2. limit). Step limits can be freely programmed by the user. Integrated air filters and back pressure valves ensure interference free and long operating times for the FlowCon.

Filter heater
A height adjustable filter heater, with up to two exhaust filters, is installed above the cylindrical vessel. Special emphasis has been placed on developing a user friendly unit. The filter heater combats any water vapour condensation in the outlet air which might cause the membranes to block. The temperature is monitored and controlled by Kuhner Insight software.

Detailed technical data can be found in the product catalog.

The Pioneer PX combines essential weighing functionality with competitive performance, offering high accuracy and repeatability for applications in laboratory, industrial and education settings. The PX is affordably priced, and intuitively designed for intelligent operation with a second line display for additional information, and USB and RS232 connectivity for easy communication.
• Applications
Basic Weighing, Parts Counting, Percent Weighing, Animal Weighing, Density Determination
• Display
Backlit Liquid Crystal Display (LCD); Second line display for additional information or guidance (dot matrix)
• Operation
AC adapter (included)
• Communication
RS232 and USB device (included); GLP/GMP data output with real-time clock
• Construction
Metal base, plastic top housing, removable stainless steel pan, glass draftshield, integrated weigh-below-hook, security bracket, calibration lock and in-use cover
• Design Features
User-selectable environmental filters and brightness settings, auto-tare, auto-dim, user-selectable span calibration points, software lockout and reset menu, userselectable communication settings and data print options, user-definable project and user IDs, software overload/underload indicator, stability indicator, four operating languages

FRONTIER™5000 SERIES Multi-Pro Centrifuges
Powerful and Versatile Universal Centrifuges for Virtually Every Lab
Application
Frontier 5000 Multi-Pro Centrifuges are designed for universal use in virtually every application in research, industrial & clinical laboratories. Combine with our range of rotors & accessories for customized use in specific applications. Available in 9 models with capacities from 0.2 ml to 4 × 750 ml - and feature high speed performance at maximum volume, automatic rotor identification and safety features.
Standard Features Include
• Powerful Platform Offers Maximum Flexibility for a Range of Applications
Our multi-purpose centrifuges offer a high-speed centrifugation platform which can be customized to fit workflow needs using a wide variety of rotors and accessories.
• Intuitively Designed for User-Friendly Operation
The intuitive design of the centrifuges & accessories enable easy access to parameter settings, and quick rotation between applications. Features include automatic rotor recognition and backlit LCD.
• Solid Engineering Ensures Reliability and Durability
The performance of these centrifuges is propelled by German engineering, and high-quality components for reliable use. Constructed of chemical-resistant stainless steel to ensure durability in lab use.
• Increased Safety
With Built-in Protective Features Frontier 5000 Series is equipped with protective features, including automatic over-speed protection, imbalance detection and self-diagnostic system to ensure reliable use and operator safety.

BINDER VDL series safety vacuum drying chambers ensure maximum safety when drying organic solvents. Explosion-protected unit with classification according to ATEX directive 2014/34/EU: EX II 2/3/- G IIB T3 Gb/Gc/- X.
Benefits
• Fast, gentle drying
• Optimum heat transfer through large thermal conducting plates
• Safe working thanks to ATEX-compliant safety concept
• Also option of modular complete system with vacuum pump and pump chamber
Important characteristics
• Temperature range: +9 °C above ambient temperature to +110 °C
• ATEX conformity for units: EX II 2/3/- G IIB T3 Gb/Gc/- X
• Intuitive touchscreen controller with graphical pressure and temperature display
• Program-controlled drying monitoring with automatic ventilation at end of process
• Internal data logger, measured values can be read out in open format via USB
• Pressure control device for heating activated from < 100 mbar
• 2 aluminum expansion racks, can be custom-positioned
• Universal connection for ventilation with ambient air or inert gas
• Universal access port DN 16 - for the introduction of external measuring devices
• Shatterproof, spring-mounted safety glass panel
• Large viewing window
• Computer interface: Ethernet
Optional equipment
• Expansion racks - Choice of aluminum or stainless steel racks depending on the application requirements
• Analogue output for temperature and pressure signals - for external monitoring and evaluation of the process parameters, integration into in-house systems is possible
• Universal ventilation - Selection of different ventilation by air or inert gas
• Universal access port DN 40 - for the introduction of external measuring devices
• Multi Management Software APT-COM - Manage, record and document device parameters
• Services - extensive services ensure correct device function

BINDER’s VD series vacuum drying chambers deliver impressive performance through their precise temperature control and gentle drying. The patented expansion rack technology from BINDER also optimizes heat transfer. The shelves can be repositioned for flexible placement and the interior of the chamber is easy to clean.
Benefits
• Fast, gentle drying
• Optimum heat transfer through large thermal conducting plates
• Safe work thanks to proven safety concept
• Also option of modular complete system with vacuum pump and pump chamber
• Important characteristics
• Temperature range: +9 °C above ambient temperature to +220 °C
• Controller with digital display of pressure and temperature
• Program-controlled drying monitoring with automatic ventilation at end of process
• Internal data logger, measured values can be read out in open format via USB
• 1 aluminum expansion rack, can be custom-positioned
• Inert gas connection
• Universal access port DN 16 - for the introduction of external measuring devices
• Shatterproof, spring-mounted safety glass panel
• Large viewing window with option of interior lighting
• Computer interface: Ethernet
• 2 relay outputs, 24 V DC (max. 0.4 A)
Optional equipment
• Touchscreen Controller - Graphical display of main process parameter
• Expansion racks - Choice of aluminum or stainless steel racks depending on the application requirements
• Analogue output for temperature and pressure signals - for external monitoring and evaluation of the process parameters, integration into in-house systems is possible
• Universal ventilation - Selection of different ventilation by air or inert gas
• Universal access port DN 40 - for the introduction of external measuring devices
• Multi Management Software APT-COM - Manage, record and document device parameters
• Services - extensive services ensure correct device function