All products

Thanks to thermoelectric cooling technology with patented heat dissipation, the new KB ECO cooling incubator is one of the most energy-efficient cooling incubator on the market. The thermoelectric cooling technology means the KB ECO series is also very quiet during operation.
Benefits
• Safe: Unique condensate and dry-out protection for all operating conditions
• Reliable: Fail-safe operation due to intelligent thermoelectric tempering
• Smart: Temperatures programmable for intermitted incubation and refrigeration
• Economical: Minimum energy consumption thanks to optimized thermoelectric cooling
Main features
• Temperature range: 0 °C through +70 °C (max. 28 °C below the ambient temperature)
• APT.line™ preheating chamber technology
• Electric temperature control thanks to thermoelectric cooling module with innovative heat dissipation
• Inner door made of tempered safety glass
• Inner chamber made completely of stainless steel
• 2 rack, stainless steel
• Access port with silicone plug Ø 30 mm
• LCD to display temperature along with additional information and alarms
• Internal data logger, measured values can be read out in open format via USB
• Unit self-test for comprehensive status analysis

The Kühner Rack-Shaker SBM/SS-X is a space saving shaker system designed for environmental rooms, laboratories and corridors. It is an extendable rack system with integrated shaking units made of stainless steel. Size and configuration can be altered at any given time.
Flexible, integrated system
Up to four shaking units (SS-X) can be incorporated into a single rack. The robustly built rack system ensures the shaking units run quietly. The rack system is designed and constructed for maximum flexibility, can be adapted to fit almost any room, and is easily extended. The configuration of the shaking units can be altered at any time with little effort. Each shaking unit is fitted with a speed controller and operates independently. Users are able to choose either orbital or linear motion as well as a suitable shaking diameter for each unit.
Ideal solution for temperature controlled rooms
The rack system is suitable for use in temperature controlled rooms. Racks and shaking units are made of stainless steel with hermetically sealed electronic parts.
Low energy consumption – low heat generation
The Kühner drive generates minimal heat which is an important factor when using the rack system in temperature controlled rooms.
Technical data SBM: SMX1900, SEM: SMX1901
Weight SBM: 54kg
Weight SS-X: 60kg
Interface, standard: CAN-Bus
Interface, optional: USB, Ethernet, digital, analogue
Ambient temperature: 0°Cup to 60°C
Consumption, maximum: 240 W (4 machines, max. Acceleration)
Consumption, maximum: 480 W (4 machines with high torgue drive)
Consumption, typical: 50 W (4 machines)

Are you screening using large numbers of 50ml bioreactors (TPP, Falcon tubes etc.)? Then our new EPFL-table is the ideal solution. This table accepts tube holders, each with a capacity of 24 x 50ml tubes. Each tube holder has its own clamp handle allowing it to be easily taken out of the incubator shaker and put on a clean bench while the other tubes keep on shaking. It’s also possible to shake microtiter plates on the EPFL-table, using Duetz 4-place coverclamps. If you have a Kuhner F-size tray (800 x 420mm), you can also clamp that on the table instead of individual holders.

• Test tube holder RGH-18 (24 tubes)
• For test tubes with 18 - 19 mm diameter

Tray for Microtiter plates E-MT.47 For 4x12 Microtiterplates or 1x12 Deepwell platesTray size E (420x420mm)

Universal tray EXU compl. 500 mm x 420 mm with shaped M4 threads for mixed loading with clamps for different Erlenmeyer flasks or test tube holders

Tray with fixed clamps E-50 To load 50 Erlenmeyer flasks with a volume of 50 ml

ISF1-Z incubator shaker - the perfect solution for shaken cultivation processes
The ISF1-Z incubator shaker is suitable for applications in laboratories, research centers and production facilities. The ISF1-Z complies with GMP (good manufacturing practice) requirements and regulations. It offers a large shaking capacity with a small footprint and many features allowing straightforward, safe handling of any culture or product. The incubator shaker is applicable for microbial, plant, human and animal cell cultures.
Performance characteristics of ISF1-Z models:
• Large shaking capacity with small footprint
• Hygienic design according to DIN EN ISO 14159
• Improved direct drive: stronger, higher shaking frequencies, very long lasting
• Up to three machines can be stacked without additional components: incubators ISF1-X/W and new ISF1-Z mixable in stack
• Flexible and retrofittable: all options and accessories applicable
Includes all features of the basic model plus:
• Vast temperature range: from 3 to 80°C, it provides the user a greater flexibility in terms of low and high temperatures.
• Fast cooling and heating
• Low temperatures for storage and inoculum preparation
• Two cooling units with eco-friendly natural gas
• Humidifying and dehumidifying possible
Detailed technical data can be found in the product catalog.

Recirculation cooler for high-performance rotary evaporators
• Filling opening at the top, drain tap at the rear
• Integrated programmer with 150 segments, can be divided into 5 programs
• Electronic level indicator and low-level alarm
• SmartCool system for digital, energy-saving cooling control, including automatic compressor control
• Clearly arranged control elements, large TFT display and membrane keypad
• USB interface and an alarm contact are integrated as standard features
• Temperature range: -20...+40 °C
• Cooling capacity at +20 °C (20 °C ambient temp.): 5000 W
• Pump pressure max.: 2 bar
• Pump flow max.: 20 l/min
• Thermal fluid fill volume: 20 – 33 l
• Dimensions (w/d/h): 550 x 650 x 970 mm

Chemically resistant membrane pump for For Hei-VAP Core models. The vacuum can be controlled by changing the speed of the pump, enabling constant distillation conditions and shorter operation times.Fully controllable stand-alone pumping unit including vacuum controller.
• Precise vacuum control avoids bumping and eliminates foaming of your evaporation solution
• Due to automatic vacuum supply to the process parameters you have more time for important laboratory activities
• Condenser is not in scope of delivery.

Chemically resistant membrane pump for all Hei-VAP models.
• Recommended for solvents with low or medium boiling points
• Vacuum can be controlled via valve operated or manual vacuum controllers
• A Vacuum valve is necessary, if you want to combine this vacuum pump with the Hei-VAP Expert Control / Hei-VAP Ultimate Control rotary evaporators

Storage tanks in grey PP for storing purified water from reverse osmosis systems. Closed and opaque design, round, including manhole for cleaning. The tank comes completely piped and is available with optional accessories.
• Input connection: R ¾''
• Drain connection: R 1¼''
• Volume (l): 200
• Dimensions (Ø x height, mm): 560 x 840
• Net weight (kg): 14

One way mixed bed ion exchange resin for polishing process water to achieve demineralized water quality.

Up to 10 bar pressure-resistant, stainless steel, empty cartridge for ion exchange resin.
• Material: stainless steel – AISI 316
• Dimensions mm (Ø x height): 240 x 410
• Connection: R ¾ "

We recommend these accessories for applications up to 1100 °C to protect the furnace floor, especially if a charging cart is used.
• Tmax 1100 °C
• Three raised edges
• Heat-resistant alloy 314 (AISI)/(DIN material no. 1.4841)
• Outer dimensions in mm (WxDxH 340x540x30)

For easy loading and unloading of the furnace

Fiberboard boxes have the dimension of 130 x 130 x 80 mm (5.25’’ x 5.25’’ x 3’’).
Dividers have to be ordered separately.

Frontier rotors extend the functionality of Frontier centrifuges by increasing the number of tubes of varied types and sizes that can be used in conjunction with each of the centrifuge models. Easy to clean and operate, the rotors are durably constructed to withstand demanding centrifugation.

Compatible adapters and other accessories:
• Adapter, D11mm, 1.5/2.0ml Tubes x6 (30130886); Adapter, D12.6mm, 1.0ml Cryo x6 (30130887); Adapter, D12.6mm, 1.8ml Cryo x6 (30130888)

Hei‐PLATE Mix'n'Heat Core+ + Pt 1000 (V4A) + Heat‐On 250 ml Block + Findenser Mini 24/24 + Findenser™ attachment kit
Includes: Magnetic stirrer Hei-PLATE Mix 'n' Heat Core+. Fast and precise heating - Without overshoot - Gentle to the sample. Pt1000 - enables precise temperature regulation. 250 ml Heat-On Blocks - ensures optimal heat transfer without the use of water or oil. Findenser™ Mini - completes the system as a high-performance condenser that is used without the use of water. The performance is optimal for solvent volumes up to 125 ml.
The magnetic stirrer Hei-PLATE Mix 'n' Heat Core+ offers you a digital display for setting your desired temperature to the degree. This precise temperature without overshooting is controlled by two selectable heating modes (FAST/PRECISE) and the optional external temperature sensor Pt1000.
It convinces with its robust design and its sophisticated functionalities, such as its key and knob illumination, which provides information about active functions at any time. The dynamic rotary knobs respond to turning speed - slow for precise adjustments, or fast for bigger jumps. The locking function protects against accidental changing of the values. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures > 50 °C, protect against burns. A carrying aid on the underside ensures safe transport.
• Circular scratch-resistant, chemical-resistant mixing plate with Kera-Disk coating
• Plate diameter ø: 145 mm
• Temperature range: 20 – 300 °C
• Heating power: 800 W
• Rotation speed range: 100… 1400 rpm
• Accuracy temperature setting: ± 1 K
• Speed accuracy: ± 2 %
• Max. stirring capacity (H₂O): 20 l
• The appliance has a residual heat indication
• Maximum load: 25 kg
• Protection class IEC 60529: IP 42
• The high performance Findenser™ Mini is for syntheses under reflux with solvent voluments up to 125 ml. It can be secured with standard laboratory clamps or with the Findenser™ attachment kit (sold separately). Save water, space and costs with Findenser™ Mini!

It convinces with its robust design and its sophisticated functionalities, such as its key and knob illumination, which provides information about active functions at any time. The dynamic rotary knobs respond to turning speed - slow for precise adjustments, or fast for bigger jumps. The locking function protects against accidental changing of the values. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures > 50 °C, protect against burns. A carrying aid on the underside ensures safe transport.
The magnetic stirrer Hei-PLATE Mix 'n' Heat Core+ offers you a digital display for setting your desired temperature to the degree. This precise temperature without overshooting is controlled by two selectable heating modes (FAST/PRECISE) and the optional external temperature sensor Pt1000.
• Circular scratch-resistant, chemical-resistant mixing plate with Kera-Disk coating
• Plate diameter ø: 145 mm
• Temperature range: 20 – 300 °C
• Heating power: 800 W
• Rotation speed range: 100… 1400 rpm
• Accuracy temperature setting: ± 1 K
• Speed accuracy: ± 2 %
• Max. stirring capacity (H₂O): 20 l
• The appliance has a residual heat indication
• Maximum load: 25 kg
• Protection class IEC 60529: IP 42
• Pt1000: optional, can be ordered separately for the product