All products

The new generation of laboratory circulators for routine work andstandard tasks
The Open Heating Bath Circulators of the new CORIO™ series feature high-quality transparent bath tanks.

Your advantages

• Models for internal applications
• Bright, white, easy to read display
• Very quiet

Frontier 5000 Multi-Pro Centrifuges are designed for universal use in multiple applications in research, industrial, and clinical laboratories and can be combined with our range of rotors and accessories for customized use. Available in 11 models with capacities from 0.2 ml to 4 × 1000 ml - and feature high-speed performance at maximum volume, automatic rotor identification and safety features.

Features

• Applications: Centrifugal Separation, General Sample Preparation, Cell Pelleting, Protein Separation, Nucleic Acid Separation, Cell Concentrating, Chemical Separation, Diagnostics, Environmental Sample Preparation, Blood Sample Processing
• Display: Backlit Liquid Crystal Display (LCD)
• Operation: Designed to be used with a variety of rotors and accessories
• Communication: N/A
• Construction: Corrosion-resistant stainless steel chamber with Polycarbonate/ABS plastic lid
• Design Features
Ten acceleration & deceleration rates, selection of running time from 10s to 99h 59min or continuous, quick spin, CFC-free refrigeration system, sample temp. indication (refrigerated models), lid-locking system, over-speed protection, dual imbalance sensing

For the optimum loading of 38 pipettes.
• Area of application: reprocessing pipettes/vials
• for 10 100 ml pipettes in row 1, distance 20 mm
• for 14 25 ml pipettes in a 2nd row, distance 26 mm
• for 14 10 ml pipettes in a 3rd row, distance 26 mm

Machine affiliation:
PG 8583
PG 8583 CD
PG 8593
PLW 8604
PLW 8683
PLW 8683 CD
PLW 8693

Optimum level of comfort for the storage of flammable chemicals with 90 minutes of fire protection
• Interior fittings: 4 storage shelves and 1 bottom trays made of powder-coated sheet steel
• Wing doors, powder-coated sheet steel
• Outer carcass, powder-coated sheet steel
• Inner carcass made of high-quality decor panels
Colour standard version:
• Wing doors in zinc yellow RAL 1018
• Carcass completely in light grey RAL 7035
• Base in slate grey RAL 7015
Available Models:
• with classical wing door technology (doors can be opened with minimum effort)
• with one-hand wing door technology (doors can be opened with minimum effort)
Technical data
• Cabinet: safety storage cabinet
• Interior: bottom traystorage shelves
• Fire resistance: 90 min
• Doors, drawers: wing doors
• Product weight: 455 Kg

The new generation
• Full convenience in use and display for all bath types
• Easy to operate - self-explanatory symbols well recognizable parameters, target as well as actual values - brightly lighting LED-display
• 4-step-operation as "plug and clean"
• Adjustable temperature range: 20-80 °C, with LED-display for target value and actual value of temperature
• Optical signal in case of excess temperature
• Timer for countdown and continuous operation
• DEGAS: adjustable pulse sound level for removing unwanted air bubbles, visible at LCD-display
• Automatic short-time ultrasound during heating
• Up period to avoid delay in boiling - switch-off possible
• Medical device class I
• Quality management system according to the requirements of EN ISO 13485
• protection class IP 33 at highest possible level through liquid-tight mains cable and housing Front without openings.
• SweepTec for permanent sound field oscillation ensures even and gentle cleaning
• Automatical safety shut-down 12 hours after last keypress
• Marking of filling level for safe dosage
• One-piece welded drain bow
• Transducers with high efficiency

The BINDER MK 240 CO₂ climate chamber is an ideal solution for applications requiring rapid and precise temperature changes. The unit provides stable and reproducible conditions within a temperature range of -40 °C to +180 °C, making it perfectly suited for cyclic temperature testing, material testing, as well as research and development and quality assurance processes.

The equipment combines reliability, safety, and modern digital functionality. Long-lasting components and standards-compliant operation ensure consistent performance, while the intuitive user interface and advanced programming capabilities enable efficient and convenient use.

Why choose this model?

• Reliable protection for samples, data, and processes
• Stable, long-term operation in industrial and laboratory environments
• Intuitive touchscreen control with advanced programmability
• Energy-efficient and environmentally friendly CO₂ (R-744) cooling technology
• Excellent price-performance ratio with modern technical solutions

Key features and technological solutions

The MK 240 CO₂ model incorporates advanced technologies to support precise and efficient testing. The APT.line™ preheating chamber technology ensures uniform temperature distribution, even during intensive temperature changes, while fast heating and cooling capabilities enable dynamic test cycles.

Thanks to digital control, users can set time-segment and real-time programs, while the integrated data logger allows for easy data handling. Data can be exported via USB and integrated into networks via Ethernet connection.

Product features:

• Temperature range: -40 °C to +180 °C
• Fast heating and cooling rates (up to 5 K/min)
• Integrated data logger with USB data export
• Ethernet and USB interfaces
• Stainless steel interior
• Heated viewing window with LED interior lighting
• Condensation protection and heated door
• Programmable ramp function and real-time clock
• Visual and acoustic alarm system
• Independent temperature safety device
• Number of shelves (std./max.)_1/6

Areas of application

• Testing of electronic and automotive components
• Material testing under extreme temperature conditions
• Rapid temperature cycling tests
• Research and development projects
• Quality assurance processes

Flexible expandability

The MK 240 CO₂ climate chamber can be customized with various accessories and software solutions, allowing it to be precisely adapted to specific testing requirements. Options include advanced data management software, additional accessories, and validation services that support operation in regulated environments.

This model is an ideal choice for users seeking a reliable, precise, and long-term stable climate chamber with modern technology and sustainable operation.

VALEGRO recirculating coolers with additional heating function have an extended working temperature range from -20 to +85 °C. The pump can be easily adjusted in user-friendly, percentage-based stages.

Whether in the laboratory, research, or production, the VALEGRO 801H recirculating coolers offer a constant cooling capacity of 0.8 kW at 20 °C, supporting stable processes around the clock. These modern units offer precise temperature control for a wide range of applications and, thanks to their compact design, fit seamlessly into any working environment. The refrigeration circuit uses an eco-friendly, natural refrigerant.

When designing the VALEGRO recirculating coolers, the focus was on maximum user-friendliness. Many helpful features such as a timer function, a removable venting grid that does not require tools, and an illuminated and simple to clean level indicator make daily work easier. The inclined OLED touch display is easy to read and ergonomic to use. The intuitive menu navigation allows quick access to all functions. Warning notices and system messages are displayed in clear, understandable language, ensuring maximum safety when using the device.

In addition to RS232 and USB-C interfaces, VALEGRO recirculating coolers are also available with Ethernet (optional). All interfaces are located directly below the display and are easy to use from the front.

FOB4 – STAND-ALONE LAB STERILIZER
HIGH FLEXIBILITY. PROCESS OPTIMIZATION.
Applications: Food, Bio-pharmaceutical, Cosmetics, Microbiology, Packaging
Loads: Canned food, Sealed & unsealed containers, Large volume parenterals, Machine parts, Blood bags, Syringes, Tools, Wrapped tools, Culture media, Garments, Glassware
Processes: Sterilization
Useful chamber capacity: 147 liter
The FOB4 Stand-alone Lab Sterilizer is an autoclave that combines excellent performances with overall high quality materials and ease of use.
The FOB4 Lab Sterilizer is suitable for the use in laboratory for many different applications, such as:
• Microbiology and analytical labs.
• Research institutes and examination agencies.
• Bio-Technologies and life sciences.
• Animal facility and clinical diagnostic labs.
• Pharmaceutical, food, chemistry industries, QC labs.
• Agricultural, environmental and veterinary labs.
These sterilizers have been specially designed with ergonomical features for easy handling of higher volume sterilization materials and goods as: glassware, media preparation, liquids, in open and sealed containers, mixed regular and high risk waste, as well as surgery instruments, textiles, rubber articles and packaged tools.
FOB4 Stand-alone Lab Sterilizer is easy to be configured, thanks to its conceptual design and modular construction with a convenient portfolio of optional kits. In fact, all the models can be configured using various customized systems guaranteed by the wide range of processes, software options and an extensive choice of accessories. Please, click on the link “recommended kit” to check out all possible configurations referred to FOB4 series.
DESIGN AND TECHNICAL FEATURES
FOB4 can be designed in two chamber dimensions: 147 liters (FOB4-TS) with single vertical sliding door or 210 liters (FOB4S-TS – FOB4/L TS) with double vertical sliding door for pass-through purposes. The vertically automatic sliding doors are pneumatically activated for space efficiency in laboratory and hospitals.
FOB4 autoclave has internal 316L stainless steel plates fed by steam used both as heat-exchanger system for steam pre-heating and to cool the chamber temperature by means of cold softened water. As an option these plates can be used for drying purposes at the end of the cycle.
Fedegari designs laboratory autoclaves combining operators’ safety as well as equipment performances. Thermal blocking system to prevent door openings in hazardous situations. Temperature probes and pressure transducers ensure constant process monitoring, as well as precision and optimal temperature distribution in the chamber, guaranteeing a high level of safety for the operator and performance and reproducibility of the sterilization process.
FOB series is equipped with DCS20 process controller: 30 cycles easy to customize in a multi-user environment. Large touch-screen color display and interface for remote monitoring via Ethernet control. DCS20 process controller is fully validated and documented.
KEY BENEFITS
• Energy and water cost-saving.
• Small foot print with superior loading capacity.
• Ergonomic positioning of adjustable operator display.
• Full and easy accessibility to technical area from front and lateral sides.
• Special test programs for routine check of sterilizer efficiency.
• GAMP5 compliant.
• GLP compliant.
• Reduced process time.
• Flexible process machine
COMPLIANCE TO
PED Directive 2014/68/UE – Pressure equipment
Machine Directive Macchine 2006/42/EC
EMC Directive 2014/35/UE
LVD Directive 2006/95/UE

Heating elements on support tubes radiating freely into the furnace chamber provide for particularly short heating times for these muffle furnaces. Thanks to their robust lightweight refractory brick insulation, they can reach a maximum working temperature of 1300 °C. These muffle furnaces thus represent an interesting alternative to the familiar L(T) ../12 models, when you need a higher application temperature.

Standard Equipment
• Heating from two sides
• Heating elements on support tubes ensure free heat radiation and a long service life
• Multi-layer insulation with robust lightweight refractory bricks in the furnace chamber
• Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
• With flap door (L)
• Adjustable air inlet in the furnace door
• Exhaust air outlet in rear wall of furnace
• Solid state relays provide for lownoise operation
• With Controller C550 (10 programs / 20 steps)

Option
• Chimney, chimney with fan or catalytic converter
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight
• Manual or automatic gas supply system
• Port for thermocouple in the rear wall or in the furnace door

The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability.

Standard Equipment
• Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity
• Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C
• Thermocouple type S (1200 °C)
• Ceramic heating plates with integral heating element which is safeguarded and easy to replace
• With lift door (LT)
• Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
• Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
• Adjustable air inlet integrated in door (see illustration)
• Exhaust air outlet in rear wall of furnace
• Controller with touch operation B510 (5 programs with each 4 segments)
• Solid state relays provide for lownoise operation

Option
• Chimney, chimney with fan or catalytic converter (not for L 1 and L 15)
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight
• Manual or automatic gas supply system
• Port for thermocouple in the rear wall or in the furnace door

For the optimum loading of 4 DIN mesh trays.
• Area of application: reprocessing OP instruments
• Suitable for 4 DIN mesh trays on 2 levels
• Insert frames: Removable for the reprocessing of tall wash items
• 6 additional connection options via Luer lock connection
• With integrated spray arm
• Loading volumes for the different levels differ from each other
Loading area
Clearances from bottom:
Level 1: with connection frame H 95, W 516, D 498 mm, without connection frame H 135, W 490, D 498 mm
Level 2: H 135, W 516, D 498 mm

Machine affiliation:
PG 8562
PG 8582
PG 8582 CD
PG 8583
PG 8583 CD
PG 8592
PG 8593
PLW 8604
PLW 8683
PLW 8683 CD
PLW 8693

A temperature control cabinet that can do it all, the KB PRO is our most powerful cooling incubator. With a temperature range of -20°C to +100°C and comprehensive programming options, it covers a wide range of applications that extend well beyond incubation. Optional light modules are also available to turn the KB PRO into a chamber for ICH photostability testing or plant growth.

Product features

• Temperature range: -20°C to +100°C
• Proven APT.line™ preheating chamber technology
• Energy-efficient cooling with modern inverter cooling unit
• Cooling with climate-neutral R-290 refrigerant
• Door heating to prevent condensation
• Adjustable fan speed
• Housing design with HIT technology
• Stainless-steel inner chamber
• Inner doors made of metal oxide-coated safety glass
• Two racks with stainless-steel telescopic rails
• Large access port with silicone plug
• Floor-standing units featuring robust twin casters with brakes at the front
• Stackable tabletop units with a volume of up to 130 liters
• Intuitive touchscreen controller with time-segment and real-time programming
• Ergonomically adjustable control terminal (for units with a volume of 470 liters and above)
• Signal triangle with light-up status display (for units with a volume of 470 liters and above)
• Internal data logger, measured values can be read out in open format via USB
• Class 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarms
• Unit self-test for comprehensive status analysis
• Data interfaces: Ethernet, USB
• BINDER Multi Management Software APT-COM™ basic edition
• Optional light modules for ICH photostability testing (for models 260, 470, 720)
• Optional LED light modules for plant growth (for models from 260)

Laboratory refrigerators and freezers are expected to offer the highest level of safety and reliability. The precise electronic control system, forced-air cooling, and highly efficient insulation combine to achieve outstanding energy efficiency, keeping operating costs low while ensuring environmental protection. Advanced components and precise regulation work together to ensure optimal storage conditions for materials over the long term.

Product Features

Simple Operation
User-friendly solutions for everyday use

• Built-in handle spanning the full height of the door
• Monochrome electronic control panel with 3 touch buttons
• Easy-to-clean stainless-steel interior
• The door remains open at an angle greater than 90°
• Flush-mounted internal ceiling LED lighting

Compliance and Documentation
Built-in safety features for the protection of sensitive materials:

• Temperature setting (calibration)
• Logging of minimum/maximum temperature values
The recorded minimum and maximum internal temperatures are saved by the unit and can be easily read on the display.
• Connectivity option for retrofitting (LAN or WiFi for BMS or SmartMonitoring system)
• Standards compliance: IEC 60068-3, IEC 61010-2-011

Safety and Reliability

Reliable storage due to consistent cooling performance, even under extreme environmental temperature conditions:
• Maximum temperature stability: ±3 °C for refrigerators / ±5 °C for freezers
• Alarm relay
Alarm transmission to the monitoring system to ensure no deviations are missed.
• The door automatically closes if opened at less than 90°.
• 10 mm diameter probe access port
• Mechanical door lock
• Long lifespan

Technical Data

• Gross/net capacity: 1447/1091 L
• External dimensions (W/D/H): 1427/867/2135 mm
• Internal dimensions (W/D/H): 1210/638/1470 mm
• Energy consumption/year: 464 kWh
• Ambient temperature: +10 °C to +35 °C
• Heat emission: 650 kJ/h
• Refrigerant: R 290
• Noise level: 60 dB(A)
• Frequency/voltage: 50 Hz / 220-240 V~
• Ventilated cooling system
• Automatic defrost
• Temperature range: 0 °C to +16 °C
• External cover/color: Steel / White
• Internal liner: Chrome-nickel steel (1.4301 / AISI 304)
• Door/Cover material: Insulated glass
• Connectivity type: SmartModule / retrofittable
• WLAN/LAN connection: Optional
• Number of adjustable shelves: 8
• Shelf material: Steel, plastic-coated
• Usable shelf size (W/D): 480/638 mm
• Shelf load capacity: 60 kg
• Castors with arrestor at the front, fixed castors at the rear
• Probe access: 1 x Ø 12 mm
• Door opening: Left fixed/right fixed
• Gross/net weight: 201/178 kg

Ashing furnace LV ../11 is designed especially for ashing processes to 1050 °C in the laboratory. Applications include determining loss on ignition, ashing food and plastics for subsequent substance analysis. A special fresh-air and exhaust air system ensures that the air is replaced 6 times per minute so that there is always sufficient oxygen for the ashing process. Incoming air passes the furnace heating and is pre-heated to ensure good temperature uniformity.

Standard Equipment
• Heating from two sides
• Ceramic heating plates with integral heating element which is safeguarded, and easy to replace
• Air exchange of more than 6 times per minute
• Good temperature uniformity due to preheating of incoming air, temperature uniformity according to DIN 17052-1 to +/− 10 °C in the defined empty work area (from 550 °C)
• Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
• Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP)
• Suitable for many standardized ashing processes according to ISO, ASTM, EN, and DIN
• With flap door (LV)
• Solid state relays provide for lownoise operation
• Controller C550 (10 programs with each 20 segments)

Options
• Overtemperature limit controller
• Hole for thermocouple in rear wall
• Hole for thermocouple in furnace door

• RGH-98 for 600mL reactor Holder for 3 x 600ml reactor
• 1 row of 3 tubes
• Vertical mounting
• Angle non-adjustable
• For fitting on a universal tray EU-EXU-FU-CU

Clamp U-300 for Erlenmeyer flasks with 250 ml vol.

Tray with fixed clamps E-2000 To load 5 Erlenmeyer flasks with a volume of 2000 ml

Available for light sensitive medium or organisms. Any Kuhner incubator shaker can be delivered with blackened windows to prevent unwanted daylight or UV radiation inside the incubator.

• Fast and convenient tube changes
• Low pulsation due to 5 roller system
• Pump head features ball bearings
• Rollers made of stainless steel
• For tubes with a 1.6-mm wall thickness (wt)
• Depending on drive and tubing, flow rate ranges from 0.38 to 3,436 ml per minute

• Tmax 1100 °C
• Dimensions 230 x 330 x 20 mm
• For models L 15, LT 15, LV 15, LVT 15, N 11