All products


% Liebherr SFPvg 8401 laboratory freezer Laboratory refrigerators and freezers are expected to offer the highest level of safety and reliability. The precise electronic control, forced-air cooling system, and highly efficient insulation combine to deliver outstanding energy efficiency, keeping operating costs low while protecting the environment. The advanced components and precise regulation ensure optimal storage conditions for materials over the long term. Product Features Simple Operation User-friendly solutions for daily use • Built-in handle spanning the full height of the door • Monochrome, 3-button electronic control interface • Easy-to-clean stainless steel interior • The door stays open at an angle greater than 90° • Flush-mounted internal ceiling LED lighting Compliance and Documentation Built-in safety features to protect sensitive materials • Temperature setting (calibration) • Recording of minimum/maximum temperature values The set minimum and maximum internal temperatures are saved by the device and can be easily viewed on the display • Connectivity via retrofit (LAN or WiFi for BMS or SmartMonitoring system) • Standard compliance: IEC 60068-3, IEC 61010-2-011 Safety and Reliability Reliable storage due to consistent cooling performance, even under extreme environmental temperature conditions • Temperature stability: up to ±3 °C for Refrigerator / ±5 °C for Freezer • Alarm relay Alarm signals are transmitted to the monitoring system, ensuring no deviations go unnoticed • The door automatically closes when opened less than 90° • Probe access port: 10 mm diameter • Mechanical door lock • Long lifespan Technical Data • Gross/net capacity: 871/702 liters • External dimensions (W/D/H): 787/1017/2135 mm • Internal dimensions (W/D/H): 489/638/1470 mm • Energy consumption per year: 870 kWh • Ambient temperature: +10 °C to +35 °C • Heat emission: 1110 kJ/h • Refrigerant: R 290 • Noise level: 60 dB(A) • Frequency / voltage: 50 Hz / 220-240 V~ • Ventilated cooling system • Automatic defrost • Temperature range: -9°C to -30°C • External casing/color: steel / white • Interior casing: Chrome-nickel steel (1.4301 / AISI 304) • Door/Cover material: steel • Network connectivity option: SmartModule / retrofittable • WLAN/LAN connectivity: optional • Number of adjustable shelves: 4 • Shelves material: steel with plastic coating • Usable shelf size (W/D): 480 / 638 mm • Shelf load capacity: 60 kg • Castors with arrestor at the front, fixed castors at the rear • Probe access port: 1 x Ø 12 mm • Door opening direction: right, reversible • Gross/net weight: 166/149 kg	% Nabertherm LT 60/12/C550 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type S (1200 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With lift door (LT) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation C550 • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door	% Miele E 134 insert 1/2 For optimum loading of 210 slides. • Area of application: reprocessing laboratory glassware Machine affiliation: G 7825 PG 8527 PG 8535 PG 8536 PLW 8636 [LAB / LAB MON] PG 8504 PG 8583 PG 8583 CD PG 8593 PLW 8505 PLW 8604 PLW 8615 PLW 8616 PLW 8617 PLW 8683 PLW 8683 CD PLW 8693 PLW 6011 PLW 6111 PLW 7111	% Miele E 136 insert 1/1 For optimum loading of 56 half petri dishes. • Area of application: reprocessing laboratory glassware • Suitable for 56 half petri dishes with Ø 100 mm • Equipped with 56 holders, height 70 mm, distance apart approx. 26 mm • For use in lower basket Machine affiliation: G 7825 PG 8527 PG 8535 PG 8536 PLW 8636 [LAB / LAB MON] PG 8504 PG 8583 PG 8583 CD PG 8593 PLW 8505 PLW 8604 PLW 8615 PLW 8616 PLW 8617 PLW 8683 PLW 8683 CD PLW 8693 PLW 6011 PLW 6111 PLW 7111
% Miele E 137 insert 1/1 For optimum loading of 56 half petri dishes. • Area of application: reprocessing laboratory glassware • Suitable for 56 half petri dishes with Ø 100 mm • Equipped with 56 holders, height 70 mm, distance apart approx. 26 mm • For use in lower basket Machine affiliation: G 7825 PG 8527 PG 8535 PG 8536 PLW 8636 [LAB / LAB MON] PG 8504 PG 8583 PG 8583 CD PG 8593 PLW 8505 PLW 8604 PLW 8615 PLW 8616 PLW 8617 PLW 8683 PLW 8683 CD PLW 8693 PLW 6011 PLW 6111 PLW 7111	% Miele E 139/1 insert 1/4 • Area of application: reprocessing laboratory glassware • Suitable for test tubes up to 12 x 200 mm • Divided into 6 surfaces • Mesh width 9 x 9 mm • For use in lower basket • Including lid A 13 Machine affiliation: G 7825 PG 8527 PG 8535 PG 8536 PLW 8636 [LAB / LAB MON] PG 8504 PG 8583 PG 8583 CD PG 8593 PLW 8615 PLW 8616 PLW 8617 PLW 8683 PLW 8683 CD PLW 8693 PLW 6011 PLW 6111 PLW 7111 PLW 8505 PLW 8604	% Miele E 144 insert 1/2 For the optimum loading of up to 18 beakers. • Area of application: reprocessing laboratory glassware • Suitable for 18 glass beakers • Equipped with 18 x 3 stay bars • For use in upper and lower basket Machine affiliation: G 7825 PG 8527 PG 8535 PG 8536 PLW 8636 [LAB / LAB MON] PG 8504 PG 8583 PG 8583 CD PG 8593 PLW 8505 PLW 8604 PLW 8615 PLW 8616 PLW 8617 PLW 8683 PLW 8683 CD PLW 8693 PLW 6011 PLW 6111 PLW 7111	% Liebherr SFPvh 1402 laboratory freezer Laboratory refrigerators and freezers are expected to provide the highest level of safety and reliability. The precise electronic control, forced-air cooling system, and highly efficient insulation ensure exceptional energy efficiency, leading to low operating costs while safeguarding the environment. The advanced components and precise regulation ensure the optimal storage of materials over the long term. Product Features Easy Operation User-friendly solutions for daily use • Full-height integrated handle • 2.4” color electronic interface with touch & swipe functionality • Easy-to-clean stainless steel interior • Flush-mounted, full-height internal side LED lighting Safety and Reliability • Ventilated cooling system • NoFrost cooling technology • Temperature range: -9 °C to -35 °C • Temperature stability: ±5 °C maximum • VCC variable speed compressor The variable speed compressors ensure the right performance is always available. This results in reduced energy consumption and improved temperature stability. • Optical and acoustic alarms in case of failure • SafetyDevice: prevents the temperature from dropping below +2 °C, avoiding freezing • PT1000 product temperature sensor In addition to the built-in control sensor, another temperature sensor is available to measure simulated product temperature. The value measured by the product temperature sensor can also be displayed on the screen. The value can be calibrated, and the device’s alarm thresholds will then be based on this value, ensuring safer storage based on real product temperature values. • Power failure alarm In case of a power outage, the built-in battery maintains power for at least twelve hours, activating an immediate audible and visible alarm. Additional indication of the start of the power outage and the maximum temperature reached is also provided. • LightAlarm If the internal temperature rises unchecked, the door is left open, or other issues occur, the internal lighting will begin to flash. • Alarm history: Simple quality control The last 10 alarms, including key data like date and maximum temperature, are logged for final quality assessment of stored goods. • Built-in data logger: traceable for years Complete traceability independent of monitoring systems through logging of the temperature profile, alarm history, and service information for up to 5 years. Stored data can be read via USB port. • Door automatically closes if opened less than 90° • Probe access port: 1 x Ø 12 mm • Electronic locking system: protection against unauthorized access with PIN or remote lock/unlock capability • SmartLock: automatic door locking in case of temperature alarm, which can only be unlocked by authorized personnel • Long lifespan Compliance and Documentation • Complies with DIN 13277 and IEC 61010-2-011 Liebherr laboratory and pharmaceutical refrigeration units meet all the characteristics and performance criteria necessary for full compliance with the DIN 13277 standard. DIN 13277 specifies requirements and test procedures for refrigeration and freezer equipment used in laboratories and for storing pharmaceuticals. • IEC 60068-3 standard for temperature distribution and consistency • IEC 61010-2-011 standard for safety • Temperature adjustment (calibration) • Recording of minimum/maximum temperature values • Integrated connectivity (LAN or WiFi for BMS or SmartMonitoring system) Technical Specifications • Gross/net volume: 1391/1091 l • External dimensions (W/D/H): 1427/867/2135 mm • Internal dimensions (W/D/H): 1210/638/1470 mm • White, stainless steel external casing • Door/Cover material: steel • Adjustable shelves: 8 • Shelves: plastic-coated grates • Usable shelf size, mm (W/D): 570 / 788 • Shelf load capacity: 60 kg • Door opening: right fixed / left fixed • Castors with arrestor at the front, fixed castors at the rear • Gross/net weight: 235/210 kg • Energy consumption/year: 1162 kWh • Ambient temperature: +10 °C to +35 °C • Heat emission: 1485 kJ/h • Refrigerant: R 290 • Noise level: 60 dB(A) • Frequency / voltage: 50/60 Hz / 220-240 V~a
% Miele E 149 insert 1/4 For optimum loading of 80 test tubes, 16 x 105 mm. • Area of application: reprocessing laboratory glassware • Suitable for 80 test tubes up to 16 x 105 mm • Additionally equipped with a lid • Mesh width on the base 8 x 8 mm Machine affiliation: G 7825 PG 8527 PG 8535 PG 8536 PLW 8636 [LAB / LAB MON] PG 8504 PG 8583 PG 8583 CD PG 8593 PLW 8604 PLW 8615 PLW 8616 PLW 8617 PLW 8683 PLW 8683 CD PLW 8693 PLW 6011 PLW 6111 PLW 7111 PLW 8505	% Miele E 402 insert For optimum loading of up to 44 watch glasses. • Area of application: reprocessing laboratory glassware • Suitable for 44 watch glasses Ø 80 - 125 mm • Equipped with 23 bars spaced 15 mm apart Machine affiliation: G 7825 PG 8527 PG 8535 PG 8536 PLW 8636 [LAB / LAB MON] PG 8504 PG 8583 PG 8583 CD PG 8593 PLW 8505 PLW 8604 PLW 8615 PLW 8616 PLW 8617 PLW 8683 PLW 8683 CD PLW 8693 PLW 6011 PLW 6111 PLW 7111	% Miele E 403 insert 1/2 For optimum loading of up to 105 watch glasses. • Area of application: reprocessing laboratory glassware • Suitable for 105 watch glasses Ø 50 - 60 mm • Equipped with 36 bars spaced 9 mm apart Machine affiliation: G 7825 PG 8527 PG 8535 PG 8536 PLW 8636 [LAB / LAB MON] PG 8504 PG 8583 PG 8583 CD PG 8593 PLW 8505 PLW 8604 PLW 8615 PLW 8616 PLW 8617 PLW 8683 PLW 8683 CD PLW 8693 PLW 6011 PLW 6111 PLW 7111	% Miele E 494 insert 1/2 Insert for the gentle holding of 5 microtiter plates. Machine affiliation: G 7825 PG 8527 PG 8535 PG 8536 PLW 8636 [LAB / LAB MON] PG 8504 PG 8583 PG 8583 CD PG 8593 PLW 8505 PLW 8604 PLW 8615 PLW 8616 PLW 8617 PLW 8683 PLW 8683 CD PLW 8693 PLW 6011 PLW 6111 PLW 7111
% Miele E 960/1 insert 1/2 Insert for the optimum loading of wide necked Erlenmeyer flasks. • Equipped with 20 large and 26 small spring hooks • Suitable for Erlenmeyer flasks & measuring cylinders Machine affiliation: PG 8527 PLW 8615 PLW 8616 PLW 8617	% Liebherr SFPvg 1402 laboratory freezer Users expect laboratory refrigerators and freezers to provide the highest levels of safety and reliability. The precise electronic control, forced-air cooling system, and highly efficient insulation together result in outstanding energy savings, keeping operating costs low while ensuring environmental protection. The advanced components and precise regulation work together to ensure optimal storage of materials. Product Features Easy Operation User-friendly solutions for everyday use • Built-in handle spanning the full height of the door • Monochrome, 3-touch electronic control panel • Easy-to-clean, stainless steel interior • Door stays open at angles greater than 90° • Flush-mounted internal ceiling LED lighting Compliance and Documentation Built-in safety features to protect sensitive materials • Temperature setting (calibration) • Logging of minimum/maximum temperature values The device records the minimum and maximum internal temperatures, which are easily readable on the display • Connectivity for retrofitting (LAN or WiFi for BMS or SmartMonitoring systems) • Standard compliance: IEC 60068-3, IEC 61010-2-011 Safety and Reliability Reliable storage due to consistent cooling performance, even under extreme ambient temperature conditions • Temperature stability: ±3 °C for refrigerator / ±5 °C for freezer • Alarm relay Transmits alarms to the monitoring system / ensures no deviations go unnoticed • The door automatically closes if the opening angle is less than 90° • Probe access port with a diameter of 10 mm • Mechanical door lock • Long service life Technical Specifications • Gross/net capacity: 1391/1091 liters • External dimensions (W/D/H) mm: 1427/867/2135 • Internal dimensions (W/D/H) mm: 1210/638/1470 • Energy consumption/year: 464 kWh • Ambient temperature: +10 °C to +35 °C • Heat emission: 1420 kJ/h • Refrigerant: R 290 • Noise level: 60 dB(A) • Frequency/voltage: 50 Hz / 220-240 V~ • Ventilated cooling system • Automatic defrost • Temperature range: -9 °C to -30 °C • External casing/color: steel / white • Internal lining: Chrome-nickel steel (1.4301 / AISI 304) • Door/Cover material: steel • Network connectivity via SmartModule / retrofittable • WLAN/LAN port: optional • Number of adjustable shelves: 8 • Shelf material: steel with plastic coating • Usable shelf size (W/D) mm: 480/638 mm • Shelf load capacity: 60 kg • Castors with arrestor at the front, fixed castors at the rear • Probe access port: 1 x Ø 12 mm • Door opening direction: left fixed / right fixed • Gross/net weight: 225/200 kg	% Miele E 963 insert 1/2 Insert for the optimum loading of beakers up to 250 ml. • Equipped with 33 x 3 stay bars for beakers up to 250 ml Machine affiliation: PG 8527 PLW 8615 PLW 8616 PLW 8617	% Miele E 965 insert 1/2 Insert for the optimum loading of beakers 250 - 600 ml. • Equipped with 15 x 3 stay bars for beakers from 250 ml to 600 ml Machine affiliation: PG 8527 PLW 8615 PLW 8616 PLW 8617
% Miele E 969 insert Insert for holding different utensils. • Perforated plate 7 x 7 x 3 mm • Suitable for E 900-4/1, E 935/1, E 975/2, E 941 with E 945* Machine affiliation: PG 8527 PLW 8615 PLW 8616 PLW 8617	% Miele APLW 045 injector nozzle Injector nozzle with plastic support, conical, Ø 2.5, length 80 mm. • Area of application: reprocessing laboratory glassware • Suitable e.g. for measuring cylinders, flasks and test tubes • Suitable for standard mobile injector units and injector baskets • Including nozzle cap, Ø 4 mm Machine affiliation: Can be used for PLW 6111 devices.	% Miele APLW 046 injector nozzle Injector nozzle with plastic support, conical, and spring holder, Ø 2.5, length 80 mm. • Area of application: reprocessing laboratory glassware • Suitable e.g. for measuring cylinders, flasks and test tubes • Suitable for standard mobile injector units and injector baskets • Including nozzle cap, Ø 4 mm Machine affiliation: Can be used for PLW 6111 devices.	% Ohaus Adapter, D6mm, 0.2/0.4ml Tubes x6 With the help of high-quality Ohaus Frontier rotors and adapters, you can find the best solution for both basic and high-performance sample preparation needs.