All products

The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability.

Standard Equipment
• Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity
• Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C
• Thermocouple type S (1200 °C)
• Ceramic heating plates with integral heating element which is safeguarded and easy to replace
• With lift door (LT)
• Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
• Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
• Adjustable air inlet integrated in door (see illustration)
• Exhaust air outlet in rear wall of furnace
• Controller with touch operation C550
• Solid state relays provide for lownoise operation

Option
• Chimney, chimney with fan or catalytic converter (not for L 1 and L 15)
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight
• Manual or automatic gas supply system
• Port for thermocouple in the rear wall or in the furnace door

A BINDER MKF series environmental simulation chamber is ideally suited for any cold and heat testing based on current temperature and climate testing methods according to DIN and IEC standards. The comprehensive standard equipment for this environmental simulation chamber ensures ease of operation.

Benefits
• Homogeneous climate conditions thanks to APT.line™ technology
• Automatic water and wastewater management
• Pressure humidification with fast response times
• Comprehensive programming and data acquisition
• Large heated viewing window

Main features

• Temperature range: -40 °C to +180 °C
• Humidity range: 10% to 98% RH
• Humidity regulation with capacitive humidity sensor and steam humidification
• APT.line™ preheating chamber technology
• Intuitive touchscreen controller with time-segment and real-time programming
• CFC-free refrigerant R-452A
• Integrated water-storage tank, 20 L
• 1 stainless steel rack
• 2 access ports with silicone plugs, 80 mm, left and right
• 4 zero-voltage relay contacts

Optional equipment

• APT-COM Multi Management Sofware – for managing, recording, and documenting unit parameters
• Racks – option of stainless steel racks, depending on test requirements
• Systems for water treatment and compressed air supply
• Services – wide range of services to ensure that the unit functions correctly

Tray with fixed clamps EX-150 To load 36 x 150 ml Erlenmeyer flasks

ISF1-Z incubator shaker - the perfect solution for shaken cultivation processes
The ISF1-Z incubator shaker is suitable for applications in laboratories, research centers and production facilities. The ISF1-Z complies with GMP (good manufacturing practice) requirements and regulations. It offers a large shaking capacity with a small footprint and many features allowing straightforward, safe handling of any culture or product. The incubator shaker is applicable for microbial, plant, human and animal cell cultures.
Performance characteristics of ISF1-Z models
• Large shaking capacity with small footprint
• Hygienic design according to DIN EN ISO 14159
• Improved direct drive: stronger, higher shaking frequencies, very long lasting
• Up to three machines can be stacked without additional components: incubators ISF1-X/W and new ISF1-Z mixable in stack
• Flexible and retrofittable: all options and accessories applicable
Includes all features of the basic model plus:
• Uses long-lasting Peltier elements for precise heating, cooling and humidity control
• Eco-friendly concept: no coolants or compressors required
• Humidity control with vast control range of 50 - 85%
• Humidifying and dehumidifying possible
Detailed technical data can be found in the product catalog.

PharMed® Extension tubing for Cassette small
• Application: Ideal for medical, lab and research uses
Features:
• High fatigue strength under repeated reversed bending stresses
• Non-toxic, biocompatible
• Very low gas permeability
• Well suited to acids and bases
• Material: Thermoplastic elastomer on a polypropylene base with plasticizers; excellent tensile strength; opaque
• Complies with the standards: USP Class VI, GLP, Pharmacopoea and Europaea
• Temperature range: -51 to +135 °C
• Sterilization: Can be autoclaved or sterilized with ethylene oxide or sterilized by irradiation
• Restriction: Additives may migrate

• Tmax 1200 °C
• Dimensions 240 x 220 x 12.7 mm
• For models L 9, LT 9, LV 9, LVT 9, N 7

For standard 2-inch High Boxes for UUS-363/480/597/714 Model with 5 Inner Doors Configuration
• Rack Dimension (WxDxH): 139x551x228mm
• Can fit standard 130 x 130 x 50 mm (5.25” x 5.25” x 2”) boxes
• Has 4 shelves and contain 4 boxes per shelf. (4 x 4 configuration)
• Made of stainless steel and has handles.
• Weight: 5 Kg

Frontier rotors extend the functionality of Frontier centrifuges by increasing the number of tubes of varied types and sizes that can be used in conjunction with each of the centrifuge models. Easy to clean and operate, the rotors are durably constructed to withstand demanding centrifugation.

Compatible adapters and other accessories:
• Adapter, D11mm, 1.5/2.0ml Tubes x6 (30130886); Adapter, D13.5mm, 5ml Tubes x2 (30130890); Adapter, D13.5mm, 7ml Tubes x2 (30130889)

For optimum loading of laboratory glassware – can be equipped with 32 nozzles.
• Area of application: reprocessing laboratory glassware
• Suitable for lab. glassware incl. Erlenmeyer and round flasks.
• Equipped with 16 A 844 nozzles and 16 A 845 nozzles
Size of A 844 injector nozzle:– Ø 2.5 mm, height 80 mm
Size of A 845 injector nozzle:– Ø 2.5 mm, height 125 mm
• Part of the EasyLoad system. The EasyLoad system makes reprocessing laboratory glassware considerably faster, simpler and more reliable. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as height adjustment of the holders is no longer necessary thanks to the smart combination of nozzles and holding frames. This makes correct positioning extremely easy.
• Nozzle spacing 60 mm across the width, 57 mm across the depth

Machine affiliation:
PLW 8636 [LAB / LAB MON]
PG 8504
PG 8583
PG 8583 CD
PG 8593
PLW 7111
PLW 8604
PLW 8683
PLW 8683 CD
PLW 8693

Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum. All parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. The pump MZ 2C NT is equipped with a gas ballast valve for continuous condensate purge increasing the pumping capability of condensable vapors. This pump is our most popular chemistry diaphragm pump, and is the heart of a family of VACUUBRAND pumping systems. The NT-series features further improved performance data and superior vapor tolerance.

Performance features
• outstanding chemical resistance and superior vapor tolerance
• high performance even at low vacuum levels
• optimized vacuum even with gas ballast for condensate purge
• whisper quiet and low vibration
• long diaphragm life, maintenance-free drive system

Selection of the suitable SONOREX SUPER depends on the sizes and numbers of objects to be cleaned and of the sample vessels to be sonicated. Different sizes of ultrasonic baths are available for various applications.

Features

• PZT-large area oscillating systems
• HF-Frequency 35 kHz
• Timer 1 - 15 minutes and continuous operation
• Housing of stainless steel - drip proof
• Drain cock included for easy emptying (from RK 100 SH upward )
• SONOREX SUPER units are CE marked

Hei-VAP Ultimate Control
Adds numerous smart features to the Hei-VAP Ultimate, as well as an overview of all parameters and the current process
• 7" touch display for controlling the entire system including the vacuum and the cooling temperature
• For precise monitoring, the pictogram on the display also symbolizes active functions
• Separate knobs for quick access: the right one for direct vacuum control, the left one for the rotation
• Setting of values either via the touch display or the separate quick access knobs
• Direct access to two favorites on the start screen
• Expandable solvent library. You can also transfer your own favorites to other devices using a USB stick
• Define and save own evaporation processes (ramps)
• Automatically evaporate with the Dynamic AUTOaccurate Program (DAA). Convenient and customizable: from foam avoidance to highly efficient evaporation
• USB and Micro SD plus LAN / RS 232 interfaces (Lab 4.0 ready)
• Lift: Hand lift or Motor lift
• Rotation speed range: 10 - 280 rpm
• Rotation speed indicator: 7" LCD color graphic display
• Heating capacity: 1,300 W
• Overheat protection bath: cut-off at 5 °C over set temperature via separate PT 1000
• Bath temperature setting: 7" LCD color graphic display
• Heating bath temperature control: electronic / digital
• Max. size evaporating flask: 5 l
• Integrated vacuum controller: Yes
• Timer: Yes
• Integrated Hei-CHILL controller: Yes
• Vacuum program Dynamic AUTOaccurate
• requires AUTOaccurate sensor: Yes
• Programmable ramps: Yes
• Condensing surface: 1,400 cm²
• Condensing surface XL condenser: 2,200 cm²

The BINDER MKFT series environmental simulation chamber for low temperature alternating climate profiles is the specialist for dynamic alternating climate change between -70 °C and 180 °C. Large performance reserves and rapid cooling make the MKFT environmental simulation chamber the high-end product for complex standards-based climate tests.
Benefits
• Homogeneous climate conditions thanks to APT.line™ technology
• Automatic water and wastewater management
• Pressure humidification with fast response times
• Comprehensive programming and data acquisition
• Large heated viewing window
Important characteristics
• Temperature range: -70 °C to +180 °C
• Humidity range: 10 % to 98 % RH
• Integrated water-storage tank, 20 liters
• 4 zero-voltage relay contacts
• APT.line™ preheating chamber technology
• Programmable condensation protection for test material
• Intuitive touchscreen controller with time-segment and real-time programming
• Internal data logger, measured values can be read out in open format via USB
• Heated viewing window with LED interior lighting
• Humidity regulation with capacitative humidity sensor and vapor humidification
• BINDER Multi Management Software APT-COM™ Basic Edition
• Troubleshooting system with visual and audible alarms
• Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
• Access port with silicone plug (Models 115, 240: 50 mm, left)
• 2 access ports with silicone plugs (Model 720: 80 mm, left and right)
• 4 castors, two with brakes
• Computer interface: Ethernet
• 230 V power socket on the right-side control panel
• Adjustable ramp function
• Integrated chart recorder
• Real-time clock
• Door heating
• Alarm notification in the event of insufficient water in fresh water tank
• 1 stainless steel rack
• Complete safety connection kit for water supply and drainage, up to 1 m in height
• Inner chamber made of stainless steel
• CFC-free refrigerants R-452A and R-23
• Cooling with cascade compressor cooling unit

In addition to the advantages of the CORIO C Circulator, the CORIO CD and CP
Immersion Circulator can be equipped with an optional pump set for
temperature control of external applications.

Your advantages

• Models for internal and external applications
• Bright, white, easy to read display
• Very quiet
• Easy switching between internal and external circulation
• Powerful and infinitely adjustable pressure pump
• USB connection
• RS232 interface for online communication
• High-quality bath tanks made of stainless steel with bath lid and drain tap
• Integrated pump connection M16×1
• Integrated cooling coil for counter-cooling
• Precise temperature control
• Easy pump change-over between internal and external circulatio

The BINDER MKF 1020 CO₂ climate chamber is an ideal solution for all applications where fast and precise temperature changes are required alongside humidity control. The unit provides stable and reproducible testing conditions within a temperature range of -48 °C to +180 °C and a relative humidity range of 10–98%, making it perfectly suitable for complex climate tests, standardized (DIN, IEC) testing, as well as research and development and quality assurance tasks.

The equipment combines reliability, safety, and modern digital functionality. The robust design and long-lasting components ensure stable operation, while the intuitive touchscreen control and advanced programming options enable efficient and user-friendly operation.

Why choose this model?

• Precise simultaneous control of temperature and humidity
• Stable long-term operation in industrial environments
• Intuitive control and digital integration
• Energy-efficient and modern CO₂ technology
• High capacity for complex testing applications

Key features and technological solutions

The MKF 1020 CO₂ model features advanced climate simulation capabilities. APT.line™ technology ensures uniform temperature distribution, while the capacitive humidity sensor and vapor humidification enable precise and stable humidity control.

Thanks to digital control, time-segment and real-time programs can be set, while the integrated data logger ensures simple data handling. Data can be exported via USB and integrated via Ethernet connection.

Main product features

• Temperature range: -48 °C to +180 °C
• Humidity range: 10% to 98% RH
• APT.line™ technology for uniform temperature distribution
• Capacitive humidity sensor and vapor humidification
• Integrated water tank (20 liters)
• Integrated data logger with USB data export
• Ethernet interface
• Stainless steel interior
• Heated viewing window with LED interior lighting
• Programmable ramp function
• Visual and acoustic alarm system
• Independent temperature safety device

The MAZERUSTAR KK-V350WE is a vacuum planetary centrifugal mixer developed for simultaneous mixing and high-efficiency deaeration of high-viscosity materials. Thanks to its vacuum technology, the system efficiently removes entrapped air bubbles while providing homogeneous and reproducible mixing results.

Its independently controlled revolution and rotation movement enables precise processing of materials with different viscosities and specific gravities without the use of mixing blades. The contactless technology helps maintain material integrity and reduces contamination risk.

The KK-V350WE is particularly suitable for electronics, pharmaceutical, chemical, and advanced material applications where bubble-free and homogeneous material processing is essential.

Key Features

• Simultaneous mixing and vacuum deaeration
• Planetary centrifugal mixing technology
• Vacuum chamber design
• Contactless processing without mixing blades
• Suitable for high-viscosity materials
• Homogeneous mixing and efficient bubble removal
• Adjustable revolution and rotation settings
• User-programmable operating conditions
• Compact laboratory design
• CE-marked model

Typical Applications

• Electronic materials
• Adhesives and resins
• Conductive and ceramic pastes
• Pharmaceutical and medical materials
• Cosmetics and specialty chemicals
• Special industrial and research materials

Main Specifications

• Maximum processing capacity: approx. 350 g × 2 containers
• Standard container: HDPE container
• Vacuum operation
• Adjustable mixing speed
• Power consumption: approx. 1.2 kW
• Dimensions (W × D × H): approx. 500 × 650 × 650 mm
• Weight: approx. 95 kg
• Compact benchtop design
• High reproducibility and process stability

The HD 5100 optimally sonicates sample volumes of 2-200 ml at 20 kHz and sonotrodes with a diameter of 2-13 mm. The generator provides up to 100 W of power.

Homogenisers with amplitude control 10 to 100 % and actual value display, pulsation, AMPLICHRON® circuit (guarantees constant amplitude independent of changing conditions), integrated timer, remote control.
Areas of application
• Disruption of cells, bacteria, viruses, tissue (cell disruption)
• Production of finest emulsions
• Homogenising substances
• Degassing of liquids
• Sample preparation for particle size analysis
• Acceleration of chemical reactions

Properties
• More functionality
• For volumes from 2-200 ml
• Flexible application possibilities
• Large display
• Programme memory

Bethe ready-to-use set:
for volumes 2-200 ml
Ultrasonic nominal power max. 100 W
- Ultrasonic generator GM 5200
- Ultrasonic transducer UW 5100
- Step horn SH 100 G
- Sonotrode TS 103, Ø 3 mm
(for volumes 3-50 ml)
- incl. tool for mounting the probes

Technical data
• Sonication volume [ml]: 2-200
• Nominal ultrasonic power [W]: 100
• Ultrasonic frequency [kHz]: 20 ± 0,5
• Sonotrode diameter [mm]: 3
• Probe length [mm]: 147
• Time setting [min]: 9 h: 59 min: 59 s or continuous operation
• Pulsation times: Working intervals 0.5-600 s: Rest intervals 0.3-600 s
• Energy display: Ws
• Heat output [W]: 100

The BANDELIN SONOREX smart ST 170 H ultrasonic bath is a high-performance, heated device designed for laboratory, healthcare, and industrial ultrasonic applications. The intense cavitation generated by ultrasound ensures thorough and uniform cleaning even on hard-to-reach surfaces, while remaining gentle on sensitive instruments.

The intuitive touchscreen control allows precise adjustment and continuous monitoring of ultrasonic power, operating time, and temperature. The integrated program memory enables reproducible cleaning processes. SweepTec technology provides a uniform ultrasonic field, while the Degas function increases cleaning efficiency through rapid degassing of the liquid.

Product features

• Ultrasonic cleaning with intensive cavitation
• Touchscreen control for easy parameter adjustment and monitoring
• Adjustable ultrasonic power (10–100%)
• Integrated heating, adjustable temperature range: 20–80 °C
• SweepTec technology for uniform ultrasonic distribution
• Degas function for rapid degassing of the cleaning liquid
• Program memory for reproducible operating processes
• Timer adjustable from 1 second to 8 hours
• Stainless steel ultrasonic tank and housing
• Side drain valve for easy liquid exchange
• IP32 protection rating

For the optimum loading of up to 98 pipettes.
• Area of application: reprocessing pipettes/vials
• Suitable for 98 measuring and full pipettes, for example
• Height of holding frame 150 mm
• 1 unit can be inserted into each of the baskets A 150 and APLW 106
• Vertical clearance without upper basket: 450 mm (with A 150 lower basket)

Machine affiliation:
PLW 8636 [LAB / LAB MON]
PG 8583
PG 8583 CD
PG 8593
PLW 7111
PLW 8604
PLW 8683
PLW 8683 CD
PLW 8693

„All in one“ unit in a cabinet with lockable door and observation window. All components (pretreatment, water softening, reverse osmosis, pure water tank with level control and pressure booster) are integrated and premounted ready to connect. Multilingual microprocessor controller with LCD display for controlling and monitoring RO systems. Display of permeate conductivity, fully automatic rinsing cycles, potential-free fault reporting relay. Module-based capability of increasing capacity at a later stage.
• Power consumption: 1.2 kW
• Mains voltage: 230/50-60 V/Hz
• Max. operating pressure: 14 bar
• Dimensions mm (W x D x H): 820 x 600 x 1870