All products

Tray with fixed clamps E-300 To load 15 Erlenmeyer flasks with a volume of 300 ml

We recommend these accessories for applications up to 1100 °C to protect the furnace floor, especially if a charging cart is used.
• Tmax 1100 °C
• Three raised edges
• Heat-resistant alloy 314 (AISI)/(DIN material no. 1.4841)
• Outer dimensions in mm (WxDxH 340x1040x30)

Frontier rotors extend the functionality of Frontier centrifuges by increasing the number of tubes of varied types and sizes that can be used in conjunction with each of the centrifuge models. Easy to clean and operate, the rotors are durably constructed to withstand demanding centrifugation.

Compatible adapters and other accessories:
• No adapters

Thanks to thermoelectric cooling technology with patented heat dissipation, the new KB ECO cooling incubator is one of the most energy-ecient cooling incubator on the market. The thermoelectric cooling technology means the KB ECO series is also very quiet during operation.
Benefits
• Safe: Unique condensate and dry-out protection for all operating conditions
• Reliable: Fail-safe operation due to intelligent thermoelectric tempering
• Smart: Temperatures programmable for intermitted incubation and refrigeration
• Economical: Minimum energy consumption thanks to optimized thermoelectric cooling
Main features
• Temperature range: 0 °C through +70 °C (max. 28 °C below the ambient temperature)
• APT.line™ preheating chamber technology
• Electric temperature control thanks to thermoelectric cooling module with innovative heat dissipation
• Inner door made of tempered safety glass
• Inner chamber made completely of stainless steel
• 2 rack, stainless steel
• Access port with silicone plug Ø 30 mm
• LCD to display temperature along with additional information and alarms
• Internal data logger, measured values can be read out in open format via USB
• Unit self-test for comprehensive status analysis

Description
Diaphragm pumps are an excellent solution for continuous, oil-free evacuation and pumping of gases. All parts in contact with pumped media are made of aluminum and selected plastics, and allow a wide range of applications for non-corrosive gases. The highly flexible, fabric-reinforced double diaphragm made of FKM is ideal for extended operating life. These pumps with four heads provide very high pumping speed. The new NT-series features improved performance data.
Performance features
• contamination-free pumping and evacuation
• very high flow rate even near ultimate vacuum
• quiet operation
• very low vibration
• exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs

Flexible and robust lab shaker
The Lab-Shaker LS-Z combines approved Kuhner quality and technology in a new modular system to provide maximum flexibility to our customers. The LS-Z, just like its predecessor LS-X, is a sturdy benchtop shaker designed for continuous and maintenance-free operation. The LS-Z is the perfect starter model, e.g. for universities or start-ups with limited space and resources. The shaker can be used for cultivation of microbial, plant and animal cell cultures.
Performance characteristics
• Compact footprint
• Hygienic design: easy cleaning
• Flexible: detachable control unit and power cube
• Robust: tolerates up to 90% rel. humidity
Quality
• Reliable technology by Kuhner
The in-house designed magnetic drive system of the LS-Z shaker guarantees accurate control and low energy consumption/heat dissipation even at high speeds. The maintenance-free direct drive is long lasting, robust, and economical. Due to hygienic design, the drive is also protected from any spills.
Flexibility
• New modular system
The LS-Z comes with three functional options: benchtop only/stand-alone, combinable with incubators from other manufacturers, or combined with the new Kuhner Kelvin+ incubator for temperature control. The LS-Z shaker will accept loads up to 25 kg and the shaking diameter can be adjusted at any time. There are three standard shaking diameters (12.5, 25 and 50 mm) with others available on request. The LS-Z shaker unit tolerates an ambient relative humidity of up to 90% and features a detachable control unit and power cube. Therefore, the LS-Z is extremely flexible regarding its installation site: it can be placed in any lab incubator or temperature controlled room.
Automatisation
• Features for automated processes
The LS-Z has a fixed stop position, which is especially useful for automated processes. The integration in a liquid handling system was successfully performed several times already. Due to the flexible Net60 interface, the LS-Z can be controlled by nearly every external software system.
Warranty
• Quality guaranteed
As with all Kuhner products, the LS-Z is a cost effective investment in quality backed with a five year warranty.

The safety storage cabinets of the UTS line are specially constructed for the storage of hazardous substances close to where they are needed. With the UTS line, all containers are always safely stored and at your fingertips when you need them.

Health
• Ideal layout of ventilation ensures an optimised air exchange.

Safety
• In case of fire, a thermocouple automatically initiates the uninterrupted closing of the doors.

Working safety
• Equipotential bonding saddles as a standard on the cabinet help to prevent spark formation.


Specifications

• Pull-out tray extends automatically
• Automatic door closure in case of fire
• Efficient airflow for low energy consumption
• Interior fittings conductive and connected to the body
• Potential equalization tabs to prevent sparking
• Type 90 - 90-minute fire protection
• Smooth wing door technology


Technical details

• Base: 35 mm
• Storage areas: 2, Storage levels: 1
• Bottom tray: extendable
• Bottom tray insert: perforated sheet insert
• Type testing by TÜV SÜD according toDIN EN 14470-1, DIN EN 16121/16122

FRONTIER™5000 SERIES Multi-Pro Centrifuges
Powerful and Versatile Universal Centrifuges for Virtually Every Lab
Application
Frontier 5000 Multi-Pro Centrifuges are designed for universal use in virtually every application in research, industrial & clinical laboratories. Combine with our range of rotors & accessories for customized use in specific applications. Available in 9 models with capacities from 0.2 ml to 4 × 750 ml - and feature high speed performance at maximum volume, automatic rotor identification and safety features.
Standard Features Include
• Powerful Platform Offers Maximum Flexibility for a Range of Applications
Our multi-purpose centrifuges offer a high-speed centrifugation platform which can be customized to fit workflow needs using a wide variety of rotors and accessories.
• Intuitively Designed for User-Friendly Operation
The intuitive design of the centrifuges & accessories enable easy access to parameter settings, and quick rotation between applications. Features include automatic rotor recognition and backlit LCD.
• Solid Engineering Ensures Reliability and Durability
The performance of these centrifuges is propelled by German engineering, and high-quality components for reliable use. Constructed of chemical-resistant stainless steel to ensure durability in lab use.
• Increased Safety
With Built-in Protective Features Frontier 5000 Series is equipped with protective features, including automatic over-speed protection, imbalance detection and self-diagnostic system to ensure reliable use and operator safety.

The Binder Environmental Walk-in Chambers with either 6 m², 9 m² or 12 m² internal dimensions and 2,3 m height are an excellent choice for stability testing in Pharma, Food & Beverage, Cosmetics, Material Testing and many other fields of application.

In Pharma, the Binder Walk-in Chambers cover long-term and accelerated stability test conditions as specified in the ICH Q1A (R2) for new drug substances and drug products.

The walk-in chambers are designed and produced in Germany, and the temperature and environmental conditioners are made by Parameter Generation and Control in Black Mountain, NC USA. The chambers offer a wide range of features and benefits to perfectly meet requirements in stability testing.

Product features

• Long-term and accelerated stability tests according to the guidelines of ICH Q1R (R2)
• Temperature accuracy: ± 1.5°C
• Humidity range (% rH): 20...90
• Humidity accuracy: ± 2.5% RH
• High-efficiency insulation panels with a U-value of 0.21 W/m2K
• Motion sensor LED lighting
• Entire inner chamber made of stainless steel
• External service access to the conditioning unit
• Safety lockable door, which can always be opened from the inside
• Environmentally friendly refrigerant R450A
• Power supply: 230V / 50Hz, 11.5A
• Available accessories: shelving system, ramp

The Binder Environmental Walk-in Chambers with either 6 m², 9 m² or 12 m² internal dimensions and 2,3 m height are an excellent choice for stability testing in Pharma, Food & Beverage, Cosmetics, Material Testing and many other fields of application.

In Pharma, the Binder Walk-in Chambers cover long-term and accelerated stability test conditions as specified in the ICH Q1A (R2) for new drug substances and drug products.

The walk-in chambers are designed and produced in Germany, and the temperature and environmental conditioners are made by Parameter Generation and Control in Black Mountain, NC USA. The chambers offer a wide range of features and benefits to perfectly meet requirements in stability testing.

Product features

• Long-term and accelerated stability tests according to the guidelines of ICH Q1R (R2)
• Temperature accuracy: ± 1.5°C
• Humidity range (% rH): 20...90
• Humidity accuracy: ± 2.5% RH
• High-efficiency insulation panels with a U-value of 0.21 W/m2K
• Motion sensor LED lighting
• Entire inner chamber made of stainless steel
• External service access to the conditioning unit
• Safety lockable door, which can always be opened from the inside
• Environmentally friendly refrigerant R450A
• Power supply: 230V / 50Hz, 11.5A
• Available accessories: shelving system, ramp

The safety storage cabinets of the UTS line are specially constructed for the storage of hazardous substances close to where they are needed. With the UTS line, all containers are always safely stored and at your fingertips when you need them.

Health
• Ideal layout of ventilation ensures an optimised air exchange.

Safety
• In case of fire, a thermocouple automatically initiates the uninterrupted closing of the doors.

Working safety
• Equipotential bonding saddles as a standard on the cabinet help to prevent spark formation.


Specifications

• Automatic door closure in case of fire
• Efficient airflow for low energy consumption
• Interior fittings conductive and connected to the body
• Optimal space utilization with fixed bottom containment trays
• Potential equalization tabs to prevent sparking
• Type 90 - 90-minute fire protection
• Smooth wing door technology


Technical details

• Base: 35 mm
• Storage areas: 2, Storage levels: 1
• Bottom tray: fixed
• Bottom tray insert: perforated sheet insert
• Type testing by TÜV SÜD according toDIN EN 14470-1, DIN EN 16121/16122

The safety storage cabinets of the UTS line are specially constructed for the storage of hazardous substances close to where they are needed. With the UTS line, all containers are always safely stored and at your fingertips when you need them.

Health
• Ideal layout of ventilation ensures an optimised air exchange.

Safety
• In case of fire, a thermocouple automatically initiates the uninterrupted closing of the doors.

Working safety
• Equipotential bonding saddles as a standard on the cabinet help to prevent spark formation.


Specifications

• Pull-out tray extends automatically
• Automatic door closure in case of fire
• Efficient airflow for low energy consumption
• Interior fittings conductive and connected to the body
• Potential equalization tabs to prevent sparking
• Type 90 - 90-minute fire protection
• Smooth wing door technology


Technical details

• Base: 35 mm
• Storage areas: 2, Storage levels: 1
• Bottom tray: extendable
• Bottom tray insert: perforated sheet insert
• Type testing by TÜV SÜD according toDIN EN 14470-1, DIN EN 16121/16122

The compactness of a benchtop centrifuge with the performance of a floor-standing centrifuge. The heated Sigma 6 16HS is suitable for a wide variety of routine and research applications. Along with high throughput with fixed-angle and swing-out rotors, it easily achieves RCF values up to 25,419 x g. Its key features are high versatility, an advanced user interface and outstanding reliability.

What makes the Sigma 6 16HS benchtop centrifuge so attractive?
Particularly thanks to the ability to use large-capacity fixed-angle rotors with high RCF, the centrifuge covers a distinctly broader spectrum of applications compared to competitive units.

The Sigma 6 16HS delivers precise separation results in all cases, whether blood pouches, petroleum flasks, microtiter and deepwell plates, or tubes and flasks from 0.2 ml to 1,000 ml.
It is widely used in microbiology and molecular biology, pharmaceutics, genomics, clinical diagnostics, bioproduction, cell culture labs and transfusion facilities. A total of twelve fixed-angle rotors and six swing-out rotors are available, along with numerous buckets and adapters – including many biosafe configurations. The heated Sigma 6 16HS has a precisely adjustable temperature range from 0°C to +70°C. It is specifically optimised for measuring the moisture content of crude oil and products made from crude oil (in accordance with ASTM D91/96).

The Sigma 6 16HS features a clearly organised display. The patented Spincontrol S one-knob controller provides superior operating convenience and process reliability. Optimisation of separation runs and yields is supported by 60 programs with the option of making user-specific settings, as well as 30 profiles for use as acceleration or braking curves. Custom person-specific settings can be saved with password-protected access control. An extremely practical feature is the large program status display, visible from a distance, with a progress bar.

Applications: Food labs, Universities & colleges, Pharmaceutical labs, Environmental labs, Oil industry

Options: Sigma 6 16S unrefrigerated centrifuge, Sigma 6 16KS refrigerated centrifuge, Sigma 6 16KHS refrigerated and heated centrifuge, Biosafe swing-out and fixed-angle rotors, Configuration for ASTM applications at +70°C, RS 232 interface

Thanks to thermoelectric cooling technology with patented heat dissipation, the new KB ECO cooling incubator is one of the most energy-efficient cooling incubator on the market. The thermoelectric cooling technology means the KB ECO series is also very quiet during operation.
Benefits
• Safe: Unique condensate and dry-out protection for all operating conditions
• Reliable: Fail-safe operation due to intelligent thermoelectric tempering
• Smart: Temperatures programmable for intermitted incubation and refrigeration
• Economical: Minimum energy consumption thanks to optimized thermoelectric cooling
Main features
• Temperature range: 0 °C through +70 °C (max. 28 °C below the ambient temperature)
• APT.line™ preheating chamber technology
• Electric temperature control thanks to thermoelectric cooling module with innovative heat dissipation
• Inner door made of tempered safety glass
• Inner chamber made completely of stainless steel
• 2 rack, stainless steel
• Access port with silicone plug Ø 30 mm
• LCD to display temperature along with additional information and alarms
• Internal data logger, measured values can be read out in open format via USB
• Unit self-test for comprehensive status analysis

Optimum level of comfort for the storage of flammable chemicals with 90 minutes of fire protection
Interior fittings: 2 Storage shelves, 1 bottom tray made of powder-coated sheet steel and base
Construction:
• Wing doors, powder-coated sheet steel
• The doors are generally right-hinged for one-door cabinets. A left-hung door can be delivered at no extra charge
• Outer carcass, powder-coated sheet steel
• Inner carcass made of high-quality decor panels
Colour standard version:
• Wing doors in zinc yellow RAL 1018
• Carcass completely in light grey RAL 7035
• Base in slate grey RAL 7015
Available Models:
• with classical wing door technology (doors can be opened with minimum effort)
Cabinet: safety storage cabinet
Interior: bottom traystorage shelves
Fire resistance: 90 min
Door: left-hingedright-hinged
Doors, drawers: wing doors
Product weight: 195,00 Kg

Optimum level of comfort for the storage of flammable chemicals with 90 minutes of fire protection
• Interior fittings: 4 Storage shelves, 1 bottom tray made of powder-coated sheet steel and base
Construction:
• Wing doors, powder-coated sheet steel
• The doors are generally right-hinged for one-door cabinets. A left-hung door can be delivered at no extra charge
• Outer carcass, powder-coated sheet steel
• Inner carcass made of high-quality decor panels
Colour standard version:
• Wing doors in zinc yellow RAL 1018
• Carcass completely in light grey RAL 7035
• Base in slate grey RAL 7015
Available Models:
• with classical wing door technology (doors can be opened with minimum effort)

• Cabinet: safety storage cabinet
• Interior: bottom traystorage shelves
• Fire resistance: 90 min
• Door: left-hingedright-hinged
• Doors, drawers: wing doors

The legendary "Vortex-Genie" you trust is now part of OHAUS! As a global leader in instruments and equipment, we assure you that the performance and quality of the Vortex-Genie will remain exceptional, and we will continuously strive to provide you with an outstanding experience. Additionally, we will empower this legend with the OHAUS advantages of Trust, Agility, Ingenuity, and Commitment, offering you greater value and superior products.

Technical data

• Control: analog
• Display: adjustment knob(s) with dial markings for analog models
• Orbit: 4 mm
• Dimensions: 165 mm x 165 mm x 122 mm (LxHxW)
• Speed Range: 600 rpm – 2,700 rpm
• Accessories included: pop-off cup; 3-inch platform

FGW – LAB GLASSWARE WASHER
THE COST-EFFECTIVE CHOICE.
LAB GLASSWARE WASHER.
Applications: Food, Bio-Pharmaceutical, Cosmetics, Microbiology
Loads: Tools, Glassware
Processes: Washing
Fedegari Lab Division latest innovation is a Lab Glassware Washer that capitalizes the experience done with FOWS-series of washers in the pharmaceutical industry.
The power of steam: a cost-effective cleaning
The new FGW Lab Glassware Washer uses a steam generator to improve washing performances. Steam has an optimized emollient effect on greasy and sticky dirt. In addition, steam is able to access hard-to-reach areas and therefore clean thoroughly. Moreover the use of steam can significantly reduces operating costs: this really eco-friendly solution allows to minimize the need of detergents as well as water consumption, lowering the running costs per cycle.
A conductivity meter placed on the FGW drain is capable to detect the water purity, helping to terminate the process as soon as the desired set-point is reached thus further reducing water and other utilities consumption of the washer.
The cleaning process is constantly supervised: dedicated probes monitoring the temperature of the air/water and of the steam in chamber. Fedegari Glassware Washer has an internal LED lamp that remains operative during the whole cycle: in case of alarm evident signals are displayed by color change.
DESIGN AND TECHNICAL FEAUTURES
The piping, as any other equipment manufactured by Fedegari, has a rigorous sanitary finishing. The FGW glassware washer is equipped with custom-made and modular internal trays, connected to the hydraulic system. The external trolleys are fully compatible with those of the FOB5 autoclave.
KEY BENEFITS
• Steam improves washing performances.
• Thema4Lab.
• Steam as Eco-friendly solution.
• Energy saving function.
• Customizable internal rack.
• Trolleys and trays fully compatible with FOB5 series.
• Sanitary components and CIP to ensure a perfect washing.
• GLP compliance.
COMPLIANCE TO
• PED Directive 2014/68/UE – Pressure equipment**
• Machine Directive Macchine 2006/42/EC
• EMC Directive 2014/35/UE
• LVD Directive 2006/95/UE

FOB – BENCHTOP LAB STERILIZER
HIGH-PERFORMANCE AND MODULAR DESIGN.
Applications: Food, Bio-Pharmaceutical, Cosmetics, Microbiology, Packaging
Loads: Canned food, Sealed & unsealed containers, Large volume parenterals, Machine parts, Blood bags, Syringes, Tools, Wrapped tools, Culture Media, Garments, Glassware
Processes: Sterilization
Useful chamber capacity: 90
FOB is a benchtop lab sterilizer that combines excellent performance with high quality materials, ease of use and reduced utilies consumption.
The FOB series are suitable for many different applications, making it the perfect choice to satisfy modern laboratory needs. FOB series autoclaves combines technology and know-how, and can be used by very different laboratories, such as:
• Private and public microbiology labs.
• High schools and Universities.
• Research institutes, life sciences and biotech labs.
• Clinical diagnostic labs.
• Agriculture, environmental and veterinary labs.
• Material testing laboratories.
• Quality control lab´s in pharma, food/beverage, chemistry/cosmetics and other industrial sectors.
FOB may be adapted to satisfy various laboratory applications and the treatment of many different types of loads, including waste with high pathogen risk, in addition to solid porous goods, packaged items and liquid/media, in open and sealed containers.
FOB series autoclaves are used in highly specialized fields thanks to a wide selection of options on a modular system. Hence, FOB sterilizers can be configured to meet the most demanding user’s requirements.
DESIGN AND TECHNICAL FEATURES
A unique opening/closing door system with patented pneumatic gasket seal guarantees perfect airtight, maximum reliability and improved safety for operators. Moreover, FOB autoclaves can be equipped with safety device to prevent door opening.
Chambers, pneumatic valves and hydraulic components are made of 316L stainless steel, with sanitary electropolished finishing. FOB is designed to assure wide and easy access to technical area for maintenance activities.
Easy installation and quick connection to the utilities makes FOB series autoclave even more attractive. To assure energy savings, FOB has a heat exchanger recovery system installed out of the chamber to reuse the heat of condensate for water pre-heating before the steam generation.
FOB series is equipped with DCS 20 process controller: 30 cycles easy to customize in a multi-user environment. Large touch-screen color display and interface for remote monitoring via Ethernet control. DCS 20 process controller is fully validated and documented.
KEY BENEFITS
• Modular concept: extremely flexible configuration.
• Energy saving system.
• Increase of the maximum temperature and the pressure
• Adjustable operator display for an ergonomic postioning.
• Space optimization: load capacity improved
• Extensive choice of loading equipment (racks, adjustable shelves, baskets, etc.).
• High level of programming with 30 configurable cycles .
• Special test programs (i.e. Bowie-Dick, vacuum, pressure leak, etc.) for routine check of sterilizer efficiency.
COMPLIANCE TO
• PED Directive 2014/68/UE – Pressure equipment
• Machine Directive Macchine 2006/42/EC
• EMC Directive 2014/35/UE
• LVD Directive 2006/95/UE