Drying and heating chamber

Drying ovens, heating chambers, and laboratory furnaces provide controlled and uniform temperature conditions for the treatment of samples and materials. They can be used for drying, sample preparation, material testing, thermal stress testing, as well as high-temperature annealing and ashing applications. Their precise and reliable operation contributes to reproducible results.


% Nabertherm LT 40/11/B510 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type N (1100 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With lift door (LT) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation B510 (5 programs with each 4 segments) • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door	% Nabertherm LT 40/11/C550 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type N (1100 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With lift door (LT) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation C550 • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door	% Nabertherm LT 40/12/B510 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type S (1200 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With lift door (LT) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation B510 (5 programs with each 4 segments) • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door	% Nabertherm LT 40/12/C550 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type S (1200 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With lift door (LT) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation C550 • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door
% Nabertherm L 40/11/B510 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type N (1100 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With flap door (L) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation B510 (5 programs with each 4 segments) • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door	% Nabertherm L 40/12/B510 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type S (1200 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With flap door (L) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation B510 (5 programs with each 4 segments) • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door	% Nabertherm L 40/12/C550 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type S (1200 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With flap door (L) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation C550 • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door	% Nabertherm LT 60/11/B510 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type N (1100 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With lift door (LT) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation B510 (5 programs with each 4 segments) • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door
% Nabertherm LT 60/11/C550 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type N (1100 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With lift door (LT) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation C550 • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door	% Nabertherm LT 60/12/B510 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type S (1200 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With lift door (LT) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation B510 (5 programs with each 4 segments) • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door	% Nabertherm LT 60/12/C550 muffle furnace The muffle furnaces L 3/11 - LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Standard Equipment • Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 - LT 60/12) for an optimal temperature uniformity • Temperature uniformity of +/− 5 K with closed fresh-air inlet in empty work space according to DIN 17052-1 at working temperatures above 800 °C • Thermocouple type S (1200 °C) • Ceramic heating plates with integral heating element which is safeguarded and easy to replace • With lift door (LT) • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used. • Adjustable air inlet integrated in door (see illustration) • Exhaust air outlet in rear wall of furnace • Controller with touch operation C550 • Solid state relays provide for lownoise operation Option • Chimney, chimney with fan or catalytic converter (not for L 1 and L 15) • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door	% Nabertherm LT 15/13/C550 muffle furnace with brick insulation Heating elements on support tubes radiating freely into the furnace chamber provide for particularly short heating times for these muffle furnaces. Thanks to their robust lightweight refractory brick insulation, they can reach a maximum working temperature of 1300 °C. These muffle furnaces thus represent an interesting alternative to the familiar L(T) ../12 models, when you need a higher application temperature. Standard Equipment • Heating from two sides • Heating elements on support tubes ensure free heat radiation and a long service life • Multi-layer insulation with robust lightweight refractory bricks in the furnace chamber • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability • With lift door (LT) • Adjustable air inlet in the furnace door • Exhaust air outlet in rear wall of furnace • Solid state relays provide for lownoise operation • With Controller C550 (10 programs / 20 steps) Option • Chimney, chimney with fan or catalytic converter • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load • Protective gas connection to purge with non-flammable process gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight • Manual or automatic gas supply system • Port for thermocouple in the rear wall or in the furnace door
% Binder FED 400 drying and heating chambers with forced convection BINDER heating chambers of the FED series provide almost unlimited capacity and are particularly adaptable. With advanced timing functions and a adjustable fan, temperature and convection conditions are easily controlled. Benefits • Uniform drying conditions thanks to APT.line™ technology • Identical test conditions throughout the chamber interior independent of sample size and quantity • Outstanding thermal insulation saves operation costs Important characteristics • Temperature range: +5 °C above ambient temperature to +300 °C • APT.line™ preheating chamber technology • Adjustable fan speed • Adjustable exhaust air flap • Controller with expanded timer functions • 2 chrome-plated racks • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm • Computer interface: RS 422	% Binder FED 720 drying and heating chambers with forced convection BINDER heating chambers of the FED Avantgarde.Line series provide almost unlimited capacity and are particularly adaptable. With advanced timing functions and a controllable fan, temperature and convection conditions are easily controlled. Benefits • Best energy efficiency on the market • Excellent temporal and spatial temperature accuracy • USB connection for recording data • Temperature range up to 300 °C Important characteristics • Temperature range: +10 °C above ambient temperature to +300 °C • Up to 30% lower energy consumption compared to conventional units on the market • High temperature accuracy thanks to APT.line™ technology • Adjustable fan speed • Controller with LCD display and enhanced time functions • Electromechanical control of the exhaust air flap • 2 chrome-plated racks • Units up to 115 liters are stackable • Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm • Ergonomic handle design • Ethernet interface • USB port for recording data

Drying and heating chamber

Filters by category