Test chamber


% Binder MKFT 115 dynamic climate chamber with humidity control The BINDER MKFT series environmental simulation chamber for low temperature alternating climate profiles is the specialist for dynamic alternating climate change between -70 °C and 180 °C. Large performance reserves and rapid cooling make the MKFT environmental simulation chamber the high-end product for complex standards-based climate tests. Benefits • Homogeneous climate conditions thanks to APT.line™ technology • Automatic water and wastewater management • Pressure humidification with fast response times • Comprehensive programming and data acquisition • Large heated viewing window Important characteristics • Temperature range: -70 °C to +180 °C • Humidity range: 10 % to 98 % RH • Integrated water-storage tank, 20 liters • 4 zero-voltage relay contacts • APT.line™ preheating chamber technology • Programmable condensation protection for test material • Intuitive touchscreen controller with time-segment and real-time programming • Internal data logger, measured values can be read out in open format via USB • Heated viewing window with LED interior lighting • Humidity regulation with capacitative humidity sensor and vapor humidification • BINDER Multi Management Software APT-COM™ Basic Edition • Troubleshooting system with visual and audible alarms • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm • Access port with silicone plug (Models 115, 240: 50 mm, left) • 2 access ports with silicone plugs (Model 720: 80 mm, left and right) • 4 castors, two with brakes • Computer interface: Ethernet • 230 V power socket on the right-side control panel • Adjustable ramp function • Integrated chart recorder • Real-time clock • Door heating • Alarm notification in the event of insufficient water in fresh water tank • 1 stainless steel rack • Complete safety connection kit for water supply and drainage, up to 1 m in height • Inner chamber made of stainless steel • CFC-free refrigerants R-452A and R-23 • Cooling with cascade compressor cooling unit	% Binder MKFT 240 dynamic climate chamber with humidity control The BINDER MKFT series environmental simulation chamber for low temperature alternating climate profiles is the specialist for dynamic alternating climate change between -70 °C and 180 °C. Large performance reserves and rapid cooling make the MKFT environmental simulation chamber the high-end product for complex standards-based climate tests. Benefits • Homogeneous climate conditions thanks to APT.line™ technology • Automatic water and wastewater management • Pressure humidification with fast response times • Comprehensive programming and data acquisition • Large heated viewing window Important characteristics • Temperature range: -70 °C to +180 °C • Humidity range: 10 % to 98 % RH • Integrated water-storage tank, 20 liters • 4 zero-voltage relay contacts • APT.line™ preheating chamber technology • Programmable condensation protection for test material • Intuitive touchscreen controller with time-segment and real-time programming • Internal data logger, measured values can be read out in open format via USB • Heated viewing window with LED interior lighting • Humidity regulation with capacitative humidity sensor and vapor humidification • BINDER Multi Management Software APT-COM™ Basic Edition • Troubleshooting system with visual and audible alarms • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm • Access port with silicone plug (Models 115, 240: 50 mm, left) • 2 access ports with silicone plugs (Model 720: 80 mm, left and right) • 4 castors, two with brakes • Computer interface: Ethernet • 230 V power socket on the right-side control panel • Adjustable ramp function • Integrated chart recorder • Real-time clock • Door heating • Alarm notification in the event of insufficient water in fresh water tank • 1 stainless steel rack • Complete safety connection kit for water supply and drainage, up to 1 m in height • Inner chamber made of stainless steel • CFC-free refrigerants R-452A and R-23 • Cooling with cascade compressor cooling unit	% Binder MKFT 720 dynamic climate chamber with humidity control The BINDER MKFT series environmental simulation chamber for low temperature alternating climate profiles is the specialist for dynamic alternating climate change between -70 °C and 180 °C. Large performance reserves and rapid cooling make the MKFT environmental simulation chamber the high-end product for complex standards-based climate tests. Benefits • Homogeneous climate conditions thanks to APT.line™ technology • Automatic water and wastewater management • Pressure humidification with fast response times • Comprehensive programming and data acquisition • Large heated viewing window Important characteristics • Temperature range: -70 °C to +180 °C • Humidity range: 10 % to 98 % RH • Integrated water-storage tank, 20 liters • 4 zero-voltage relay contacts • APT.line™ preheating chamber technology • Programmable condensation protection for test material • Intuitive touchscreen controller with time-segment and real-time programming • Internal data logger, measured values can be read out in open format via USB • Heated viewing window with LED interior lighting • Humidity regulation with capacitative humidity sensor and vapor humidification • BINDER Multi Management Software APT-COM™ Basic Edition • Troubleshooting system with visual and audible alarms • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm • Access port with silicone plug (Models 115, 240: 50 mm, left) • 2 access ports with silicone plugs (Model 720: 80 mm, left and right) • 4 castors, two with brakes • Computer interface: Ethernet • 230 V power socket on the right-side control panel • Adjustable ramp function • Integrated chart recorder • Real-time clock • Door heating • Alarm notification in the event of insufficient water in fresh water tank • 1 stainless steel rack • Complete safety connection kit for water supply and drainage, up to 1 m in height • Inner chamber made of stainless steel • CFC-free refrigerants R-452A and R-23 • Cooling with cascade compressor cooling unit	% Binder MKT 115 dynamic climate chamber Temperature ranges between -70 °C and 180 °C, with the added benefit of natural simulation, are what make the BINDER MKT series so unique. At the same time, this environmental simulation chamber fulfills the very highest precision and performance requirements for cyclical temperature tests. Benefits • Homogeneous climate conditions thanks to APT.line™ technology • Comprehensive programming and data acquisition • Large heated viewing window Important characteristics • Temperature range: -70 °C to +180 °C • 4 zero-voltage relay contacts • APT.line™ preheating chamber technology • Programmable condensation protection for test material • Heated viewing window with LED interior lighting • BINDER Multi Management Software APT-COM™ Basic Edition • Troubleshooting system with visual and audible alarms • Intuitive touchscreen controller with time-segment and real-time programming • Internal data logger, measured values can be read out in open format via USB • Access port with silicone plug (Models 115, 240: 50 mm, left) • 2 access ports with silicone plugs (Model 720: 80 mm, left and right) • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm • 4 castors, two with brakes • Computer interface: Ethernet • 230 V power socket on the right-side control panel • Adjustable ramp function • Integrated chart recorder • Real-time clock • Door heating • 1 stainless steel rack • Inner chamber made of stainless steel • CFC-free refrigerants R-452A and R-23 • Cooling with cascade compressor cooling unit
% Binder MKT 240 dynamic climate chamber Temperature ranges between -70 °C and 180 °C, with the added benefit of natural simulation, are what make the BINDER MKT series so unique. At the same time, this environmental simulation chamber fulfills the very highest precision and performance requirements for cyclical temperature tests. Benefits • Homogeneous climate conditions thanks to APT.line™ technology • Comprehensive programming and data acquisition • Large heated viewing window Important characteristics • Temperature range: -70 °C to +180 °C • 4 zero-voltage relay contacts • APT.line™ preheating chamber technology • Programmable condensation protection for test material • Heated viewing window with LED interior lighting • BINDER Multi Management Software APT-COM™ Basic Edition • Troubleshooting system with visual and audible alarms • Intuitive touchscreen controller with time-segment and real-time programming • Internal data logger, measured values can be read out in open format via USB • Access port with silicone plug (Models 115, 240: 50 mm, left) • 2 access ports with silicone plugs (Model 720: 80 mm, left and right) • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm • 4 castors, two with brakes • Computer interface: Ethernet • 230 V power socket on the right-side control panel • Adjustable ramp function • Integrated chart recorder • Real-time clock • Door heating • 1 stainless steel rack • Inner chamber made of stainless steel • CFC-free refrigerants R-452A and R-23 • Cooling with cascade compressor cooling unit	% Binder MKT 720 dynamic climate chamber Temperature ranges between -70 °C and 180 °C, with the added benefit of natural simulation, are what make the BINDER MKT series so unique. At the same time, this environmental simulation chamber fulfills the very highest precision and performance requirements for cyclical temperature tests. Benefits • Homogeneous climate conditions thanks to APT.line™ technology • Comprehensive programming and data acquisition • Large heated viewing window Important characteristics • Temperature range: -70 °C to +180 °C • 4 zero-voltage relay contacts • APT.line™ preheating chamber technology • Programmable condensation protection for test material • Heated viewing window with LED interior lighting • BINDER Multi Management Software APT-COM™ Basic Edition • Troubleshooting system with visual and audible alarms • Intuitive touchscreen controller with time-segment and real-time programming • Internal data logger, measured values can be read out in open format via USB • Access port with silicone plug (Models 115, 240: 50 mm, left) • 2 access ports with silicone plugs (Model 720: 80 mm, left and right) • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm • 4 castors, two with brakes • Computer interface: Ethernet • 230 V power socket on the right-side control panel • Adjustable ramp function • Integrated chart recorder • Real-time clock • Door heating • 1 stainless steel rack • Inner chamber made of stainless steel • CFC-free refrigerants R-452A and R-23 • Cooling with cascade compressor cooling unit	% Binder LIT MK 240 battery test chamber Battery test chambers from BINDER are ideal for aging, performance, and stress testing in quality assurance and battery production. To ensure maximum safety, all the chambers in the LIT MK series are fitted with detection and fire suppression equipment as standard. TÜV SÜD AG has recently confirmed that the LIT MK 240 and LIT MK 720 battery test chambers are suitable for EUCAR LEVEL 6. Benefits • Safety thanks to extensive protective measures • Homogeneous climate conditions thanks to APT.line™ preheating chamber • Extensive programming and data collection • Excellent overview of the test object thanks to large heated viewing window Important characteristics • Temperature range: -40 °C to +110 °C • Class 2 independent temperature safety device when temperature is set to +120 °C • Reversible stainless steel pressure relief flap installed in the middle on top of the unit • Enhanced door-locking mechanism with reinforced brackets • Monitoring of CO, H₂, O₂, and temperature in testing area atmosphere • Inertization equipment • CO₂ fire suppression • APT.line™ preheating chamber technology • Programmable condensation protection for samples • Heated viewing window with LED interior lighting • BINDER Multi Management Software APT-COM™ basic edition • Intuitive touchscreen controller with time-segment and real-time programming • Internal data logger, measured values can be read out in open format via USB • Access port with silicone plug (Models 240), 50 mm, left • 2 access ports with silicone plugs (Model 720), 80 mm, left and right • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm • Computer interface: Ethernet • 230 V power socket on the side control panel on the right • 1 stainless steel rack, can be freely positioned • CFC-free refrigerant R-452A • Cooling with compressor cooling unit • TÜV SÜD confirms that the LIT MK 240 and LIT MK 720 chambers are suitable for EUCAR level 6 Optional equipment • Electromechanical door-locking mechanism • Additional access ports available in various sizes and locations • Multi Management Software APT-COM for managing, recording, and documenting unit parameters • Services – wide range of services to ensure that the unit functions correctly	% Binder LIT MK 720 battery test chamber Battery test chambers from BINDER are ideal for aging, performance, and stress testing in quality assurance and battery production. To ensure maximum safety, all the chambers in the LIT MK series are fitted with detection and fire suppression equipment as standard. TÜV SÜD AG has recently confirmed that the LIT MK 240 and LIT MK 720 battery test chambers are suitable for EUCAR LEVEL 6. Benefits • Safety thanks to extensive protective measures • Homogeneous climate conditions thanks to APT.line™ preheating chamber • Extensive programming and data collection • Excellent overview of the test object thanks to large heated viewing window Important characteristics • Temperature range: -40 °C to +110 °C • Class 2 independent temperature safety device when temperature is set to +120 °C • Reversible stainless steel pressure relief flap installed in the middle on top of the unit • Enhanced door-locking mechanism with reinforced brackets • Monitoring of CO, H₂, O₂, and temperature in testing area atmosphere • Inertization equipment • CO₂ fire suppression • APT.line™ preheating chamber technology • Programmable condensation protection for samples • Heated viewing window with LED interior lighting • BINDER Multi Management Software APT-COM™ basic edition • Intuitive touchscreen controller with time-segment and real-time programming • Internal data logger, measured values can be read out in open format via USB • Access port with silicone plug (Models 240), 50 mm, left • 2 access ports with silicone plugs (Model 720), 80 mm, left and right • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm • Computer interface: Ethernet • 230 V power socket on the side control panel on the right • 1 stainless steel rack, can be freely positioned • CFC-free refrigerant R-452A • Cooling with compressor cooling unit • TÜV SÜD confirms that the LIT MK 240 and LIT MK 720 chambers are suitable for EUCAR level 6 Optional equipment • Electromechanical door-locking mechanism • Additional access ports available in various sizes and locations • Multi Management Software APT-COM for managing, recording, and documenting unit parameters • Services – wide range of services to ensure that the unit functions correctly

Test chamber

Filters by category