Laboratory refrigerator and freezer

Reliable laboratory refrigeration and freezing solutions for the safe storage of biological samples, reagents, chemicals, and other temperature-sensitive materials. Precise and stable temperature control, reliable operation, and energy-efficient technology provide optimal storage conditions for valuable samples and materials.


% KIRSCH LABEX® 468 PRO-ACTIVE laboratory refrigerator with explosion-proof interior This laboratory refrigerator features 6 shelves as standard. Plastic drawer with adjustable longitudinal and cross dividers or aluminium trays on telescopic runners are available at an extra cost. All shelves and inserts are vertically adjustable and the device has an explosion-proof interior. A glass door can also be ordered optionally. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • Re-circulating air cooling • 6 shelves, height-adjustable • Warning in case of power failure (optical and acoustic) • Explosion proof interior (LABEX®-Increased-Safety) • Optimized ventilation plates to minimize interior temperature differences • Automatic defrosting • Meltwater tray for manual emptying • Easy-to-read LED temperature display • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission Options • Insulating glass door • Lock for glass door • Decorative frame • Castors • Additional shelves on mountings or support rails • Drawers on telescopic runners: 57x43x5,6 cm • Additional length and cross dividers for drawer • GSM-Module • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 460 l • Temperature setting (approx.): +0 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 / 60 Hz • Power consumption: 170 Watts • Average consumption: 1,03 KWh / 24 h • Overall dimensions • (incl. distance from wall): 74 x 80 x 181 (w x d x h in cm) • Interior dimensions: 60 x 57 x 128 (w x d x h in cm) • Overall dimensions with door • opened at 90°: 74 x 144 (w x d in cm) • Drawer inner dimensions: 57 x 43 x 5,6 (w x d x h in cm) • Shelf dimensions: 59 x 50 (w x d in cm) • Max. loading capacity per drawer/shelf: 24 kg / 40 kg • Weight: 112 kg / 125 kg (net / gross)	% KIRSCH LABEX® 340 PRO-ACTIVE laboratory refrigerator with explosion-proof interior This laboratory fridge features 2 plastic drawers and 4 plastic-coated shelves as standard. All shelves and inserts are vertically adjustable and the device has an explosion-proof interior. Optionally the laboratory refrigerator can also be fitted with castors. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • Re-circulating air cooling • 2 drawers and 4 shelves, height-adjustable • Warning in case of power failure (optical and acoustic) • Explosion proof interior (LABEX®-Intrinsic Safety) • Optimized ventilation plates to minimize interior temperature differences • Automatic defrosting • Meltwater tray for manual emptying • Easy-to-read LED temperature display • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission Options • Insulating glass door with lock • Decorative frame • Castors • Drawers on telescopic runners • Additional shelves on mountings or support rails • Additional lenght and cross dividers for drawer • GSM-Module • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 330 l • Temperature setting (approx.): +0 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 / 60 Hz • Power consumption: 128 Watts • Average consumption: 1,14 KWh / 24 h • Overall dimensions • (incl. distance from wall): 67 x 69 x 181 (w x d x h in cm) • Interior dimensions: 53 x 45 x 128 (w x d x h in cm) • Overall dimensions with door • opened at 90°: 67 x 127 (w x d in cm) • Drawer inner dimensions: 50,4 x 32 x 5,6 (w x d x h in cm) • Shelf dimensions: 52,7 x 39 (w x d in cm) • Max. loading capacity per drawer/shelf: 16 kg / 40 kg • Weight: 93 kg / 105 kg (net / gross)	% KIRSCH LABEX® 288 PRO-ACTIVE laboratory refrigerator with explosion-proof interior This laboratory fridge features 1 plastic drawer and 3 plastic-coated shelves as standard. All shelves and inserts are vertically adjustable and the device has an explosion-proof interior. A glass door can also be ordered optionally. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • Re-circulating air cooling • 1 drawer and 3 shelves, height-adjustable • Warning in case of power failure (optical and acoustic) • Explosion proof interior (LABEX®-Increased-Safety) • Optimized ventilation plates to minimize interior temperature differences • Automatic defrosting • Meltwater tray for manual emptying • Easy-to-read LED temperature display • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission Options • Insulating glass door with lock • Decorative frame • Castors • Drawers on support rails • Additional shelves with support brackets or support rails • Additional lenght and cross dividers for drawer • GSM-Module • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 280 l • Temperature setting (approx.): +0 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 / 60 Hz • Power consumption: 100 Watts • Average consumption: 0,76 KWh / 24 h • Overall dimensions • (incl. distance from wall): 67 x 75 x 131 (w x d x h in cm) • Interior dimensions: 53 x 50 x 100 (w x d x h in cm) • Overall dimensions with door • opened at 90°: 67 x 135 (w x d in cm) • Drawer inner dimensions: 50,4 x 32 x 5,6 (w x d x h in cm) • Shelf dimensions: 52,7 x 39 (w x d in cm) • Max. loading capacity per drawer/shelf: 16 kg / 40 kg • Weight: 72 kg / 85 kg (net / gross)	% KIRSCH LABO-720-CHROMAT PRO-ACTIVE laboratory refrigerator This laboratory fridge has a glass door, an integrated power outlet strip with 3 sockets and a cable bushing with a diameter of approximately 7 cm fitted as standard. The cable bushing is located in the middle of the right side panel. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 5 shelves, height-adjustable • Castors • Warning in case of power failure (optical and acoustic) • Insulating glass door and interior light • Built-in 3-way-socket • Access port for cables and probes • diameter app. 7 cm • Re-circulating air cooling • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Rapid defrosting • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Low-noise compressor • Potential free contact for alarm transmission • Low-noise compressor • Lockable door Options • Insulating glass door • Adjustable feet to compensate for uneven floors. • Lock for glass door • Additionals shelves on mountings or support rails • Additional drawers on telescopic runner (57x40x5,6 cm): max. 12 pieces • Additional lenght and cross dividers for drawers • Aluminium trays or baskets with support rails • Meltwater tray for manual emptying • Cooling machine with cold water connection • Cooling machines with natural refrigerant • Outer panels in stainless steel 4301 • GSM-Modul • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Disc-type pen-recording thermometer with 7-day measuring cycle with 100 recording discs and 5 felt tip pens • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 720 l • Temperature setting (approx.): +2 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 Hz • Power consumption: 250 Watts • Average consumption: 1,63 KWh / 24 h • Overall dimensions (incl. distance from wall): 77 x 98 x 195,5 (w x d x h in cm) • Interior dimensions: 62 x 77 x 140 (w x d x h in cm) • Overall dimensions with door opened at 90°: 77 x 165 (w x d in cm) • Shelf dimensions: 59 x 65 (w x d in cm) • Max. loading capacity per shelf: 40 kg • Weight: 145 kg / 174 kg (net / gross)
% KIRSCH LABO-720 PRO-ACTIVE laboratory refrigerator This laboratory refrigerator has 5 vertically adjustable and plastic coated shelves which rest on mountings. This laboratory refrigerator can optionally be fitted with a glass door. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 5 shelves, height-adjustable • Castors. • Re-circulating air cooling • Warning in case of power failure (optical and acoustic) • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Rapid defrosting • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software • Potential free contact for alarm transmission • Low-noise compressor Options • Insulating glass door with lock • Adjustable feet to compensate for uneven floors. • Shelves on mountings or support rails • Additional drawers on telescopic runners (57x40x5,6 cm): max. 12 pieces • Additional lenght and cross dividers for drawers • Aluminium trays or baskets with support rails • LED illumination mounted at side wall • Meltwater tray for manual emptying • Cooling machine with cold water connection • Cooling machines with natural refrigerant • Outer panels in stainless steel 4301 • GSM-Modul • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Disc-type pen-recording thermometer with 7-day measuring cycle with 100 recording discs and 5 felt tip pens • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 700 l • Temperature setting (approx.): +2 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 Hz • Power consumption: 250 Watts • Average consumption: 1,46 KWh / 24 h • Overall dimensions • (incl. distance from wall): 77 x 98 x 195,5 (w x d x h in cm) • Interior dimensions: 62 x 77 x 140 (w x d x h in cm) • Overall dimensions with door • opened at 90°: 77 x 165 (w x d in cm) • Shelf dimensions: 59 x 65 (w x d in cm) • Max. loading capacity per drawer/shelf: 40 kg • Weight: 145 kg / 174 kg (net / gross)	% KIRSCH LABO-520 PRO-ACTIVE laboratory refrigerator This laboratory refrigerator has 5 vertically adjustable and plastic coated shelves which rest on mountings. The shelves can optionally rest onsupport rails. Drawers, aluminium trays and wire baskets are available as well. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • Castors • 5 shelves, height-adjustable • Re-circulating air cooling • Warning in case of power failure (optical and acoustic) • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission • Low-noise compressor • Lockable door Options • Insulating glass door with lock • Adjustable feet to compensate for uneven floors. • Shelves on mountings or support rails • Additional drawers on telescopic runners (57x40x5,6 cm): max. 12 pieces • Additional length and cross dividers for drawers • Aluminum trays or baskets with support rails • LED illumination mounted at side wall • Meltwater tray for manual emptying • Cooling machine with cold water connection • Cooling machines with natural refrigerant • Outer panels in stainless steel 4301 • GSM-Modul • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Temperature probe PT 100 or PT 1000, 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 500 l • Temperature setting (approx.): +2 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 Hz • Power consumption: 250 Watts • Average consumption: 1,40 KWh / 24 h • Overall dimensions (incl. distance from wall): 77 x 76 x 195,5 (w x d x h in cm) • Interior dimensions: 62 x 57 x 140 (w x d x h in cm) • Overall dimensions with door opened at 90°: 74 x 144 (w x d in cm) • Shelf dimensions: 59 x 45 (w x d in cm) • Max. loading capacity per drawer/shelf: 40 kg • Weight: 120 kg / 148 kg (net / gross)	% KIRSCH LABO-468 PRO-ACTIVE laboratory refrigerator This laboratory refrigerator has 4 vertically adjustable and plastic coated shelves which rest on mountings. The shelves can optionally rest on support rails. Drawers, aluminium trays and wire baskets are available as well. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 4 shelves, height-adjustable • Re-circulating air cooling • Warning in case of power failure (optical and acoustic) • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission • Low-noise compressor • Lockable door Options • Insulating glass door • Lock for glass door • Decorative frame • 60 Hz cooling machine upon request • Castors • Additional shelves on mountings or support rails • Additional drawers on telescopic runners (57x43x5,6 cm): max. 12 pieces • Additional lenght and cross dividers for drawers • Aluminium trays or baskets with support rails • LED illumination mounted at side wall • Meltwater tray for manual emptying • GSM-Module • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 460 l • Temperature setting (approx.): +2 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 Hz • Power consumption: 170 Watts • Average consumption: 1,00 KWh / 24 h • Overall dimensions (incl. distance from wall): 74 x 80 x 181 (w x d x h in cm) • Interior dimensions: 60 x 57 x 128 (w x d x h in cm) • Overall dimensions with door opened at 90°: 74 x 144 (w x d in cm) • Shelf dimensions: 59 x 50 (w x d in cm) • Max. loading capacity per drawer/shelf: 24 kg / 40 kg • Weight: 109 kg / 122 kg (net / gross)	% KIRSCH LABO-340 PRO-ACTIVE laboratory refrigerator The laboratory fridge comes with 1 drawer and 4 shelves as standard. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 4 shelves, height- adjustable • Re-circulating air cooling • Warning in case of power failure (optical and acoustic) • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission • Lockable door Options • Insulating glass door • Lock for glass door • Decorative frame • Castors • Additional s helves on mountings or telescopic runners • Additional drawers on telescopic runners: max. 10 pieces • Additional lenght and cross dividers for drawer • LED illumination mounted at side wall • Meltwater tray for manual emptying • GSM-Module • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity: 330 l • Temperature setting (approx.): +2 to +15 °C • Voltage: 220 - 240 V • Frequency: 50 Hz • Power consumption: 110 Watts • Average consumption: 0,65 KWh / 24 h • Overall dimensions (incl. distance from wall): 67 x 69 x 181 (w x d x h in cm) • Interior dimensions: 53 x 45 x 128 (w x d x h in cm) • Overall dimensions with door opened at 90°: 67 x 127 (w x d in cm) • Drawer inner dimensions: 50,4 x 32 x 5,6 (w x d x h in cm) • Shelf dimensions: 53 x 39 • Max. loading capacity per drawer/shelf: 16 kg / 40 kg • Weight: 88 kg / 100 kg (net / gross)
% KIRSCH LABO-288 PRO-ACTIVE laboratory refrigerator This laboratory fridge comes with 3 shelves as standard. The refrigerator can also be equipped with power failure alarm against surcharge. • PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 3 shelves, height- adjustable • Re-circulating air cooling • Warning in case of power failure (optical and acoustic) • Optimized ventilation plates to minimize interior temperature differences • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission • Lockable door Options • Decorative frame • Glass door with lock • 60 Hz cooling machine upon request • Castors • Door fitting • Condensate container • Plastic-drawer on roller runners • Aluminium-drawer on roller runners • Stainless steel-drawer • Additional shelf on rails or overlays • Additional lenght and cross dividers for drawer • LED illumination mounted at side wall • GSM-Module • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with waxed paper strips • Temperature probe PT 100 or PT 1000, • 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical specifications • Capacity 280 l • Temperature setting (approx.) +2 to +15 °C • Voltage : 220 - 240 V • Frequency: 50 Hz • Power consumption: 88 Watts • Average consumption: 0,68 KWh / 24 h • Overall dimensions (incl. distance from wall): 67 x 75 x 124 (w x d x h in cm) • Interior dimensions: 53 x 50 x 100 (w x d x h in cm) • Overall dimensions with door opened at 90°: 67 x 135 (w x d in cm) • Shelf dimensions: 52 x 39 (w x d in cm) • Max. loading capacity per drawer/shelf: 40 kg • Weight: 78 kg / 85 kg (net / gross)	% KIRSCH LABO-100 PRO-ACTIVE laboratory refrigerator This laboratory refrigerator can be installed normally as well as in an undercounter installation. Door coupling fittings or decorative frames are available at an extra cost. When the device is being installed as a stand-alone unit we can optionally supply a matching tabletop. • PRO-ACTIVE- Control: • Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors • 2 shelves • Re-circulating air cooling • Undercounter type • Warning in case of power failure (optical and acoustic) • Automatic defrosting • Melt water evaporation • Easy-to-read LED temperature display • Automatical defrosting and melt water evaporation • Easy accessible control panel with key switch • Micro-processor controlled temperature and thawing regulation to maximize temperature stability • Minimum/maximum temperature memory • Safety device to prevent freezing • Optical and acoustical alarm • Data documentation can be read via USB interface with KIRSCH Datanet software. • Potential free contact for alarm transmission • Low-noise compressor (noise level I; sounds perception: whisper) • Lockable door Options • Glass door with lock • Work surface • 60 Hz cooling machine upon request • Decorative frame • Door fitting • Castors • Additional shelf or drawer • Additional length and cross dividers • Melt water tray for manual emptying • GSM-Module • PC-KIT-NET (Network capable version) • Pen-recording thermometer for placing loosely inside appliance with 2 waxed paper strips • Temperature probe PT 100 or PT 1000, 4 wire sensor, class 1/3 B, incl. measuring flask incorporated Technical Specifications • Capacity 95 l • Temperature setting (approx.) +2 to +15 °C • Voltage 220 - 240 V • Frequency 50 Hz • Power consumption 76 Watts • Average consumption 0,64 KWh / 24 h • Overall dimensions • (incl. distance from wall) 54 x 54 x 82 (w x d x h in cm) • Interior dimensions 44 x 43 x 47 (w x d x h in cm) • Overall dimensions with door • opened at 90° 54 x 106 (w x d in cm) • Drawer inner dimensions 40 x 32 x 5,6 (w x d x h in cm) • Shelf dimensions 43 x 36 (w x d in cm) • Max. loading capacity per drawer/shelf 13 kg / 25 kg • Weight 46 kg / 50 kg (net / gross)	% KIRSCH LABO 125 ESSENTIAL laboratory refrigerator This laboratory fridge can be installed normally as well as in an undercounter installation. Door coupling fittings or decorative frames are available at an extra cost. The temperature display can optionally be installed in the front side of an external furniture. When the device is being installed as a stand-alone unit we can supply a matching tabletop at a surcharge. Overview • 2 shelves • Undercounter type • Automatic defrosting • Melt water evaporation • Digital temperature display • Acoustic warning device • Lockable door Options • Glass door • Work surface • Decorative frame • Door fitting • Castors • Additional shelves: 43,8 x 33 cm • Additional drawers: 40,8 x 32 x 5,6 cm • Additional length and cross dividers • Digital temperature display prepared for external installation • Connecting terminal for remote alarm (potential free contact) • Melt water tray for manual emptying • GSM-Module • Compressor ventilator installed, in case built-in furniture or handling with 60Hz version • GSM-Module • Pen-recording thermometer for placing loosely inside appliance with 2 waxed paper strips • PT 100 or PT 1000 sensor for temperature recording and monitoring via EDP system Technical specifications • Capacity: 120 l • Temperature setting (approx.): +2 to +15 °C • Voltage: 220 - 240 V • Frequeny: 50 Hz • Power consumption: 125 Watts • Average consumption: 0,55 KWh / 24 h • Overall dimensions (incl. distance from wall): 54 x 53,5 x 81 (w x d x h in cm) • Interior dimensions: 44 x 42 x 67 (w x d x h in cm) • Overall dimensions with door opened at 90°: 54 x 106 (w x d in cm) • Shelf dimensions: 43 x 33 (w x d in cm) • Max. loading capacity per drawer/shelf : 13 kg / 25 kg • Weight: 42 kg / 44 kg (net / gross)

Laboratory refrigerator and freezer

Filters by category