Rotary evaporator

Rotary evaporators are used to remove solvents, concentrate solutions and recover solvents. The thin liquid film formed on the wall of the rotating evaporation flask increases the evaporation surface area, while reduced pressure lowers the solvent’s boiling point. The solvent vapour condenses in the condenser and collects in the receiving flask.


% Heidolph Hei-VAP Industrial - glassware set A2C • Excellent user safety with high-impact transparent PMMA door • Non-fogging safety glass and metal frame guard hood provides excellent user protection • The evaporation flask is illuminated during operation for increased visibility • Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C • Receiver cassettes and additional PMMA door housing protect against threat of glassware breakage • Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom • Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories • Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ) • Large touch screen control panel with illuminated displays for all process parameters, programmable ramps • Programs for your process control o SETpressure Program for solvent separations o This program holds a set vacuum constant and uses a hysteresis o Optionally, the process can be predefined via programmable ramps o AUTOaccurate Supports very precise automatic pressure control for solvent evaporation and separations. o This program identifies multiple boiling points automatically by reducing vacuum. • Hei-VAP Industrial - Technical Data • Lift: motor lift • Rotation speed range: 6 – 160 rpm • Temp. range heating bath: 20 – 180 °C • Bath temperature setting: digital • Temperature accuracy: ±1 °C • Heating capacity: 4,000 W • Overheat cut-off protection: yes • Display: 7" Touchpanel • Integrated vacuum controller: yes • Timer: yes • Vacuum program SETpressure: yes • Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes • Supply Power: 4,600 W • Protection class DIN EN 60529: IP 20 • Max. condensing surface: 1.2 m²	% Heidolph Hei-VAP Industrial - glassware set R Shorty • Excellent user safety with high-impact transparent PMMA door • Non-fogging safety glass and metal frame guard hood provides excellent user protection • The evaporation flask is illuminated during operation for increased visibility • Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C • Receiver cassettes and additional PMMA door housing protect against threat of glassware breakage • Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom • Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories • Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ) • Large touch screen control panel with illuminated displays for all process parameters, programmable ramps • Programs for your process control o SETpressure Program for solvent separations o This program holds a set vacuum constant and uses a hysteresis o Optionally, the process can be predefined via programmable ramps o AUTOaccurate Supports very precise automatic pressure control for solvent evaporation and separations. o This program identifies multiple boiling points automatically by reducing vacuum. • Hei-VAP Industrial - Technical Data • Lift: motor lift • Rotation speed range: 6 – 160 rpm • Temp. range heating bath: 20 – 180 °C • Bath temperature setting: digital • Temperature accuracy: ±1 °C • Heating capacity: 4,000 W • Overheat cut-off protection: yes • Display: 7" Touchpanel • Integrated vacuum controller: yes • Timer: yes • Vacuum program SETpressure: yes • Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes • Supply Power: 4,600 W • Protection class DIN EN 60529: IP 20 • Max. condensing surface: 1.2 m²	% Heidolph Hei-VAP Industrial - glassware set K • Excellent user safety with high-impact transparent PMMA door • Non-fogging safety glass and metal frame guard hood provides excellent user protection • The evaporation flask is illuminated during operation for increased visibility • Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C • Receiver cassettes and additional PMMA door housing protect against threat of glassware breakage • Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom • Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories • Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ) • Large touch screen control panel with illuminated displays for all process parameters, programmable ramps • Programs for your process control o SETpressure Program for solvent separations o This program holds a set vacuum constant and uses a hysteresis o Optionally, the process can be predefined via programmable ramps o AUTOaccurate Supports very precise automatic pressure control for solvent evaporation and separations. o This program identifies multiple boiling points automatically by reducing vacuum. • Hei-VAP Industrial - Technical Data • Lift: motor lift • Rotation speed range: 6 – 160 rpm • Temp. range heating bath: 20 – 180 °C • Bath temperature setting: digital • Temperature accuracy: ±1 °C • Heating capacity: 4,000 W • Overheat cut-off protection: yes • Display: 7" Touchpanel • Integrated vacuum controller: yes • Timer: yes • Vacuum program SETpressure: yes • Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes • Supply Power: 4,600 W • Protection class DIN EN 60529: IP 20 • Max. condensing surface: 1.2 m²	% Heidolph Hei-VAP Industrial - glassware set RC Shorty • Excellent user safety with high-impact transparent PMMA door • Non-fogging safety glass and metal frame guard hood provides excellent user protection • The evaporation flask is illuminated during operation for increased visibility • Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C • Receiver cassettes and additional PMMA door housing protect against threat of glassware breakage • Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom • Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories • Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ) • Large touch screen control panel with illuminated displays for all process parameters, programmable ramps • Programs for your process control o SETpressure Program for solvent separations o This program holds a set vacuum constant and uses a hysteresis o Optionally, the process can be predefined via programmable ramps o AUTOaccurate Supports very precise automatic pressure control for solvent evaporation and separations. o This program identifies multiple boiling points automatically by reducing vacuum. • Hei-VAP Industrial - Technical Data • Lift: motor lift • Rotation speed range: 6 – 160 rpm • Temp. range heating bath: 20 – 180 °C • Bath temperature setting: digital • Temperature accuracy: ±1 °C • Heating capacity: 4,000 W • Overheat cut-off protection: yes • Display: 7" Touchpanel • Integrated vacuum controller: yes • Timer: yes • Vacuum program SETpressure: yes • Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes • Supply Power: 4,600 W • Protection class DIN EN 60529: IP 20 • Max. condensing surface: 1.2 m²
% Heidolph Hei-VAP Industrial - glassware set KC • Excellent user safety with high-impact transparent PMMA door • Non-fogging safety glass and metal frame guard hood provides excellent user protection • The evaporation flask is illuminated during operation for increased visibility • Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C • Receiver cassettes and additional PMMA door housing protect against threat of glassware breakage • Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom • Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories • Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ) • Large touch screen control panel with illuminated displays for all process parameters, programmable ramps • Programs for your process control o SETpressure Program for solvent separations o This program holds a set vacuum constant and uses a hysteresis o Optionally, the process can be predefined via programmable ramps o AUTOaccurate Supports very precise automatic pressure control for solvent evaporation and separations. o This program identifies multiple boiling points automatically by reducing vacuum. • Hei-VAP Industrial - Technical Data • Lift: motor lift • Rotation speed range: 6 – 160 rpm • Temp. range heating bath: 20 – 180 °C • Bath temperature setting: digital • Temperature accuracy: ±1 °C • Heating capacity: 4,000 W • Overheat cut-off protection: yes • Display: 7" Touchpanel • Integrated vacuum controller: yes • Timer: yes • Vacuum program SETpressure: yes • Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes • Supply Power: 4,600 W • Protection class DIN EN 60529: IP 20 • Max. condensing surface: 1.2 m²	% Heidolph Hei-VAP Industrial B - glassware set R • Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C • Receiver cassettes protect against threat of glassware breakage • Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom • Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories • Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ) • Large touch screen control panel with illuminated displays for all process parameters, programmable ramps Features identical specifications as the Hei-VAP Industrial, but for limited budgets and comes without these safety aspects: • Metal frame and safety glass guard hood covering the bath • High-impact PMMA door covering the glassware assembly • High-impact PMMA latching doors which cover the receiving flask cassettes Programs for your process control • SETpressure Program for solvent separations o This program holds a set vacuum constant and uses a hysteresis o Optionally, the process can be predefined via programmable ramps • AUTOaccurate Supports very precise automatic pressure control for solvent evaporation and separations. o This program identifies multiple boiling points automatically by reducing vacuum. Technical Data • Lift: motor lift • Rotation speed range: 6 – 160 rpm • Temp. range heating bath: 20 – 180 °C • Bath temperature setting: digital • Temperature accuracy: ±1 °C • Heating capacity: 4,000 W • Overheat cut-off protection: yes • Display: 7" Touchpanel • Integrated vacuum controller: yes • Timer: yes • Vacuum program SETpressure: yes • Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes • Supply Power: 4,600 W • Protection class DIN EN 60529: IP 20 • Max. condensing surface: 1.2 m² Glassware R - Glassware only suitable for high-boiling media such as xylene, DMF or DMSO and reflux distillation Includes: • A single condenser for ascending condensation - condensation surface of 0.6 m² • A shut-off valve for operating the rotary evaporator as a reflux reactor • An evaporation flask of 20 liters • A receiving flask of 10 liters	% Heidolph Hei-VAP Industrial B - glassware set RC Picture similar • Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C • Receiver cassettes protect against threat of glassware breakage • Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom • Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories • Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ) • Large touch screen control panel with illuminated displays for all process parameters, programmable ramps Features identical specifications as the Hei-VAP Industrial, but for limited budgets and comes without these safety aspects: • Metal frame and safety glass guard hood covering the bath • High-impact PMMA door covering the glassware assembly • High-impact PMMA latching doors which cover the receiving flask cassettes Programs for your process control • SETpressure Program for solvent separations o This program holds a set vacuum constant and uses a hysteresis o Optionally, the process can be predefined via programmable ramps • AUTOaccurate Supports very precise automatic pressure control for solvent evaporation and separations. o This program identifies multiple boiling points automatically by reducing vacuum. Technical Data • Lift: motor lift • Rotation speed range: 6 – 160 rpm • Temp. range heating bath: 20 – 180 °C • Bath temperature setting: digital • Temperature accuracy: ±1 °C • Heating capacity: 4,000 W • Overheat cut-off protection: yes • Display: 7" Touchpanel • Integrated vacuum controller: yes • Timer: yes • Vacuum program SETpressure: yes • Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes • Supply Power: 4,600 W • Protection class DIN EN 60529: IP 20 • Max. condensing surface: 1.2 m² Glassware RC • Glassware only suitable for high-boiling media such as xylene, DMF or DMSO and reflux distillation Includes: • A single condenser for ascending condensation - condensation surface of 0.6 m² • A shut-off valve for operating the rotary evaporator as a reflux reactor • An evaporation flask of 20 liters • Two receiving flasks of 10 liters	% Heidolph Hei-VAP Industrial B - glassware set A Picture similar • Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C • Receiver cassettes protect against threat of glassware breakage • Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom • Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories • Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ) • Large touch screen control panel with illuminated displays for all process parameters, programmable ramps Features identical specifications as the Hei-VAP Industrial, but for limited budgets and comes without these safety aspects: • Metal frame and safety glass guard hood covering the bath • High-impact PMMA door covering the glassware assembly • High-impact PMMA latching doors which cover the receiving flask cassettes Programs for your process control • SETpressure Program for solvent separations o This program holds a set vacuum constant and uses a hysteresis o Optionally, the process can be predefined via programmable ramps • AUTOaccurate Supports very precise automatic pressure control for solvent evaporation and separations. o This program identifies multiple boiling points automatically by reducing vacuum. Technical Data • Lift: motor lift • Rotation speed range: 6 – 160 rpm • Temp. range heating bath: 20 – 180 °C • Bath temperature setting: digital • Temperature accuracy: ±1 °C • Heating capacity: 4,000 W • Overheat cut-off protection: yes • Display: 7" Touchpanel • Integrated vacuum controller: yes • Timer: yes • Vacuum program SETpressure: yes • Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes • Supply Power: 4,600 W • Protection class DIN EN 60529: IP 20 • Max. condensing surface: 1.2 m² Glassware A - Flexible glassware with excellent separation performance. Suitable for liquids with a boiling point up to 100 °C and/or foaming liquids. Includes: • 1 pc single condenser • 1 pc expansion vessel • 1 pc evaporation flask of 20 liters • 1 pc receiving flask of 10 liters
% Heidolph Hei-VAP Industrial B - glassware set A2 • Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C • Receiver cassettes protect against threat of glassware breakage • Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom • Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories • Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ) • Large touch screen control panel with illuminated displays for all process parameters, programmable ramps Features identical specifications as the Hei-VAP Industrial, but for limited budgets and comes without these safety aspects: • Metal frame and safety glass guard hood covering the bath • High-impact PMMA door covering the glassware assembly • High-impact PMMA latching doors which cover the receiving flask cassettes Programs for your process control • SETpressure Program for solvent separations o This program holds a set vacuum constant and uses a hysteresis o Optionally, the process can be predefined via programmable ramps • AUTOaccurate Supports very precise automatic pressure control for solvent evaporation and separations. o This program identifies multiple boiling points automatically by reducing vacuum. Technical Data • Lift: motor lift • Rotation speed range: 6 – 160 rpm • Temp. range heating bath: 20 – 180 °C • Bath temperature setting: digital • Temperature accuracy: ±1 °C • Heating capacity: 4,000 W • Overheat cut-off protection: yes • Display: 7" Touchpanel • Integrated vacuum controller: yes • Timer: yes • Vacuum program SETpressure: yes • Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes • Supply Power: 4,600 W • Protection class DIN EN 60529: IP 20 • Max. condensing surface: 1.2 m² Glassware A2 - Achieving very high rates of distillation - especially for foaming liquids Glassware for very high rates of distillation and excellent separation performance. For liquids with a boiling point up to 100 °C and/or foaming liquids. For distillation of most solvents including acetone, hexane, ethanol and water. Includes: • A double condenser in series (for descending and ascending condensation) – condensation surface of 1.2 m² • An expansion vessel as foam brake • An evaporation flask of 20 liters • A receiving flask of 10 liters	% Heidolph Hei-VAP Industrial B - glassware set A1 Picture similar • Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C • Receiver cassettes protect against threat of glassware breakage • Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom • Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories • Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ) • Large touch screen control panel with illuminated displays for all process parameters, programmable ramps Features identical specifications as the Hei-VAP Industrial, but for limited budgets and comes without these safety aspects: • Metal frame and safety glass guard hood covering the bath • High-impact PMMA door covering the glassware assembly • High-impact PMMA latching doors which cover the receiving flask cassettes Programs for your process control • SETpressure Program for solvent separations o This program holds a set vacuum constant and uses a hysteresis o Optionally, the process can be predefined via programmable ramps • AUTOaccurate Supports very precise automatic pressure control for solvent evaporation and separations. o This program identifies multiple boiling points automatically by reducing vacuum. Technical Data • Lift: motor lift • Rotation speed range: 6 – 160 rpm • Temp. range heating bath: 20 – 180 °C • Bath temperature setting: digital • Temperature accuracy: ±1 °C • Heating capacity: 4,000 W • Overheat cut-off protection: yes • Display: 7" Touchpanel • Integrated vacuum controller: yes • Timer: yes • Vacuum program SETpressure: yes • Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes • Supply Power: 4,600 W • Protection class DIN EN 60529: IP 20 • Max. condensing surface: 1.2 m² Glassware A1 • Glassware for very high rates of distillation. Also suitable for liquids with a boiling point up to 120 °C. Recommended for continuous evaporation in combination with the automatic module Hei-VOLUME Distimatic Pro. Includes: • A double condenser in series (for descending and ascending condensation) – condensation surface of 1.2 m² • An expansion vessel • An evaporation flask of 20 liters • A receiving flask of 10 liters	% Heidolph Hei-VAP Industrial B - glassware set AC • Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C • Receiver cassettes protect against threat of glassware breakage • Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom • Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories • Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ) • Large touch screen control panel with illuminated displays for all process parameters, programmable ramps Features identical specifications as the Hei-VAP Industrial, but for limited budgets and comes without these safety aspects: • Metal frame and safety glass guard hood covering the bath • High-impact PMMA door covering the glassware assembly • High-impact PMMA latching doors which cover the receiving flask cassettes Programs for your process control • SETpressure Program for solvent separations o This program holds a set vacuum constant and uses a hysteresis o Optionally, the process can be predefined via programmable ramps • AUTOaccurate Supports very precise automatic pressure control for solvent evaporation and separations. o This program identifies multiple boiling points automatically by reducing vacuum. Technical Data • Lift: motor lift • Rotation speed range: 6 – 160 rpm • Temp. range heating bath: 20 – 180 °C • Bath temperature setting: digital • Temperature accuracy: ±1 °C • Heating capacity: 4,000 W • Overheat cut-off protection: yes • Display: 7" Touchpanel • Integrated vacuum controller: yes • Timer: yes • Vacuum program SETpressure: yes • Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes • Supply Power: 4,600 W • Protection class DIN EN 60529: IP 20 • Max. condensing surface: 1.2 m² Glassware AC - Distill with flexibility – even when processing splashing and foaming substances. Flexible glassware with excellent separation performance. Suitable for liquids with a boiling point up to 100 °C and/or foaming liquids. Includes: • A single condenser • An expansion vessel • An evaporation flask of 20 liters • two receiving flasks of 10 liters	% Heidolph Hei-VAP Industrial B - glassware set A2C • Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C • Receiver cassettes protect against threat of glassware breakage • Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom • Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories • Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ) • Large touch screen control panel with illuminated displays for all process parameters, programmable ramps Features identical specifications as the Hei-VAP Industrial, but for limited budgets and comes without these safety aspects: • Metal frame and safety glass guard hood covering the bath • High-impact PMMA door covering the glassware assembly • High-impact PMMA latching doors which cover the receiving flask cassettes Programs for your process control • SETpressure Program for solvent separations o This program holds a set vacuum constant and uses a hysteresis o Optionally, the process can be predefined via programmable ramps • AUTOaccurate Supports very precise automatic pressure control for solvent evaporation and separations. o This program identifies multiple boiling points automatically by reducing vacuum. Technical Data • Lift: motor lift • Rotation speed range: 6 – 160 rpm • Temp. range heating bath: 20 – 180 °C • Bath temperature setting: digital • Temperature accuracy: ±1 °C • Heating capacity: 4,000 W • Overheat cut-off protection: yes • Display: 7" Touchpanel • Integrated vacuum controller: yes • Timer: yes • Vacuum program SETpressure: yes • Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes • Supply Power: 4,600 W • Protection class DIN EN 60529: IP 20 • Max. condensing surface: 1.2 m² Glassware A2C - Achieving very high rates of distillation - especially for foaming liquids Glassware for very high rates of distillation and excellent separation performance. For liquids with a boiling point up to 100 °C and/or foaming liquids. For distillation of most solvents including acetone, hexane, ethanol and water. Includes: A double condenser in series (for descending and ascending condensation) – condensation surface of 1.2 m² • An expansion vessel as foam brake • An evaporation flask of 20 liters • two receiving flasks of 10 liters
% Heidolph Hei-VAP Industrial B - glassware set A1C • Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C • Receiver cassettes protect against threat of glassware breakage • Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom • Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories • Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ) • Large touch screen control panel with illuminated displays for all process parameters, programmable ramps Features identical specifications as the Hei-VAP Industrial, but for limited budgets and comes without these safety aspects: • Metal frame and safety glass guard hood covering the bath • High-impact PMMA door covering the glassware assembly • High-impact PMMA latching doors which cover the receiving flask cassettes Programs for your process control • SETpressure Program for solvent separations o This program holds a set vacuum constant and uses a hysteresis o Optionally, the process can be predefined via programmable ramps • AUTOaccurate Supports very precise automatic pressure control for solvent evaporation and separations. o This program identifies multiple boiling points automatically by reducing vacuum. Technical Data • Lift: motor lift • Rotation speed range: 6 – 160 rpm • Temp. range heating bath: 20 – 180 °C • Bath temperature setting: digital • Temperature accuracy: ±1 °C • Heating capacity: 4,000 W • Overheat cut-off protection: yes • Display: 7" Touchpanel • Integrated vacuum controller: yes • Timer: yes • Vacuum program SETpressure: yes • Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes • Supply Power: 4,600 W • Protection class DIN EN 60529: IP 20 • Max. condensing surface: 1.2 m² Glassware A1C - Achieving very high rates of distillation - especially during automated processes Glassware for very high rates of distillation. Also suitable for liquids with a boiling point up to 120 °C. Recommended for continuous evaporation in combination with the automatic module Hei-VOLUME Distimatic Pro. Includes: • A double condenser in series (for descending and ascending condensation) – condensation surface of 1.2 m² • An expansion vessel • An evaporation flask of 20 liters • two receiving flasks of 10 liters	% Heidolph Hei-VAP Industrial B - glassware set R Shorty • Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C • Receiver cassettes protect against threat of glassware breakage • Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom • Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories • Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ) • Large touch screen control panel with illuminated displays for all process parameters, programmable ramps Features identical specifications as the Hei-VAP Industrial, but for limited budgets and comes without these safety aspects: • Metal frame and safety glass guard hood covering the bath • High-impact PMMA door covering the glassware assembly • High-impact PMMA latching doors which cover the receiving flask cassettes Programs for your process control • SETpressure Program for solvent separations o This program holds a set vacuum constant and uses a hysteresis o Optionally, the process can be predefined via programmable ramps • AUTOaccurate Supports very precise automatic pressure control for solvent evaporation and separations. o This program identifies multiple boiling points automatically by reducing vacuum. Technical Data • Lift: motor lift • Rotation speed range: 6 – 160 rpm • Temp. range heating bath: 20 – 180 °C • Bath temperature setting: digital • Temperature accuracy: ±1 °C • Heating capacity: 4,000 W • Overheat cut-off protection: yes • Display: 7" Touchpanel • Integrated vacuum controller: yes • Timer: yes • Vacuum program SETpressure: yes • Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes • Supply Power: 4,600 W • Protection class DIN EN 60529: IP 20 • Max. condensing surface: 1.2 m² Glassware Shorty R - For applications with limited mounting height Glassware similar to glassware R but with a shorter single condenser (32 cm less). To use when the mounting height is limited like for example under fume hoods or in confined conditions. Includes: • A single condenser for ascending condensation - condensation surface of 0.6 m² • An evaporation flask of 20 liters • A receiving flask of 10 liters	% Heidolph Hei-VAP Industrial B - glassware set RC Shorty • Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C • Receiver cassettes protect against threat of glassware breakage • Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom • Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories • Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ) • Large touch screen control panel with illuminated displays for all process parameters, programmable ramps Features identical specifications as the Hei-VAP Industrial, but for limited budgets and comes without these safety aspects: • Metal frame and safety glass guard hood covering the bath • High-impact PMMA door covering the glassware assembly • High-impact PMMA latching doors which cover the receiving flask cassettes Programs for your process control • SETpressure Program for solvent separations o This program holds a set vacuum constant and uses a hysteresis o Optionally, the process can be predefined via programmable ramps • AUTOaccurate Supports very precise automatic pressure control for solvent evaporation and separations. o This program identifies multiple boiling points automatically by reducing vacuum. Technical Data • Lift: motor lift • Rotation speed range: 6 – 160 rpm • Temp. range heating bath: 20 – 180 °C • Bath temperature setting: digital • Temperature accuracy: ±1 °C • Heating capacity: 4,000 W • Overheat cut-off protection: yes • Display: 7" Touchpanel • Integrated vacuum controller: yes • Timer: yes • Vacuum program SETpressure: yes • Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes • Supply Power: 4,600 W • Protection class DIN EN 60529: IP 20 • Max. condensing surface: 1.2 m² Glassware Shorty RC - For applications with limited mounting height Glassware similar to glassware R but with a shorter single condenser (32 cm less). To use when the mounting height is limited like for example under fume hoods or in confined conditions. Includes: • A single condenser for ascending condensation - condensation surface of 0.6 m² • An evaporation flask of 20 liters • two receiving flasks of 10 liters	% Heidolph Hei-VAP Industrial B - glassware set KC • Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C • Receiver cassettes protect against threat of glassware breakage • Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom • Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories • Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ) • Large touch screen control panel with illuminated displays for all process parameters, programmable ramps Features identical specifications as the Hei-VAP Industrial, but for limited budgets and comes without these safety aspects: • Metal frame and safety glass guard hood covering the bath • High-impact PMMA door covering the glassware assembly • High-impact PMMA latching doors which cover the receiving flask cassettes Programs for your process control • SETpressure Program for solvent separations o This program holds a set vacuum constant and uses a hysteresis o Optionally, the process can be predefined via programmable ramps • AUTOaccurate Supports very precise automatic pressure control for solvent evaporation and separations. o This program identifies multiple boiling points automatically by reducing vacuum. Technical Data • Lift: motor lift • Rotation speed range: 6 – 160 rpm • Temp. range heating bath: 20 – 180 °C • Bath temperature setting: digital • Temperature accuracy: ±1 °C • Heating capacity: 4,000 W • Overheat cut-off protection: yes • Display: 7" Touchpanel • Integrated vacuum controller: yes • Timer: yes • Vacuum program SETpressure: yes • Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes • Supply Power: 4,600 W • Protection class DIN EN 60529: IP 20 • Max. condensing surface: 1.2 m²
% Heidolph Distimatic Pro Workstation Stand-alone, automated rotary evaporator system This package includes: • Automatic module Hei-VOLUME Distimatic Pro Benchtop: For automated filling of the rotary flask and condensate drainage by overpressure • Hei-VAP Ultimate Control Benchtop rotary evaporator: Motor-driven lift model with integrated vacuum and recirculating chiller control. Equipped with coated G9B XL high-performance vertical condenser (condensation area: 0.22 m²). • Rotary evaporator including 5 L flask and 5 L long-lasting heating bath liquid for unattended operation of the system, without having to refill the heating bath • Hei-CHILL 1100 Pro recirculation chiller including cooling liquid - Hei-CHILL Pro (20 l) and RS 232 cable for central control of the chiller via the control panel of the rotary evaporator: Optimum performance for automated continuous operation. • Hei-VAC Vario Control vacuum pump including condensate chiller: quiet and energy-saving speed-controlled diaphragm vacuum pump for a stable system vacuum • Tubing set: Chemical-resistant tubing for vacuum and cooling lines	% Heidolph Distimatic Pro Workstation 24/7 Stand-alone, automated evaporator system This package includes: • Distimatic Pro Bench-top 24/7 including automatic drainage of residue • Hei-VAP Ultimate Control Rotary Evaporator with motor lift and coated, vertical glassware set G9B XL • Vacuum pump Hei-VAC Vario Control • Condenser for Hei-VAC Vario • Chiller Hei-CHILL 1100 Pro • Evaporator flask 5000ml • Cable RS232 SUB-D • Tubing set • Temperature transfer liquid for circulation chiller - Hei-CHILL Pro (20l), Heating bath liquid (170°) (5l)	% Heidolph Distimatic Pro Integration Package For integration in an existing vacuum and cooling system This package includes: • Distimatic Pro Bench-top without automatic drainage of residue • Hei-VAP Ultimate Control Rotary Evaporator with motor lift and coated, vertical glassware set G9B XL • Tubing set	% Heidolph Distimatic Pro Integration Package 24/7 For integration in an existing vacuum and cooling system This package includes: • Distimatic Pro 24/7 Bench-top including automatic drainage of residue • Hei-VAP Ultimate Control Rotary Evaporator with motor lift and coated, vertical glassware set G9B XL • Tubing set

Rotary evaporator

Filters by category