Accessories for Miele PLW 8617 laboratory washers

Base, rollable 1.150 mm wide ready, with bottom tray, floor drain. established connection without.
• Can be used for 1-door appliances with a width of 1.150 mm
• Running wheels for pulling the equipment forward, in case of servicing
• Can only be used for appliances with a drain valve
• Easy access for servicing

Machine affiliation: Can be used for PLW 8617 devices.

Steam condenser for optimal dehumidification and cooling of the air outlet.
• Can only be used with a drying unit
• Option to connect to the on-site cooling water circuit

Machine affiliation: Can be used for PLW 8617 devices.

Wall fitting for the manual production of demineralised water.
• Pressurised to 10 bar
• Complete with pressure hose 150 cm

For loading different utensils.
• Area of application: reprocessing laboratory glassware
• Suitable for beakers, funnels, breast milk pumps, for example
• With flexible handles

Drying unit, electric, for appliances 1.150 mm wide and for optimal internal/external drying of laboratory equipment.
• With superstructure cover, air intake. through the ceiling installation
• With 2 H14 HEPA filters
• Optimum safety – HEPA filter directly in front of the rinsing chamber
Due to the location of the HEPA filter in front of the flushing chamber, it also retains particles from the heating system.
• Air capacity 250 m³/h
• HEPA filter lifetime: 1,000 hours


Machine affiliation: Can be used for PLW 8617 devices.

Drain pump to convert an appliance with a drain valve into a version equipped with a drain pump.
• For installations without a floor drain

Machine affiliation: Can be used for PLW 8617 devices.

Transfer trolley for loading and unloading cleaning and disinfection machines and laboratory washers.
• Equipped with 4 castors, lockable
• Simple and comfortable handling thanks to the ergonomic handle bar
• Equipped with a removable drip tray
• Adjustable to different heights
• Suitable for cleaning in container wagon washing systems

Machine affiliation: Can be used for PLW 8617 devices.

Built-in protocol printer for printing process protocols.

Machine affiliation: Can be used for PLW 8617 devices.

Lid for fixing delicate wash items.
Area of application: reprocessing laboratory glassware
• Perforated plate 7 x 7 x 3 mm

Machine affiliation: Can be used for PLW 8617 devices, suitable for insert E 969.

For optimum loading of up to 105 watch glasses.
• Area of application: reprocessing laboratory glassware
• Suitable for 105 watch glasses Ø 50 - 60 mm
• Equipped with 36 bars spaced 9 mm apart

Insert for the gentle cleaning of delicate load items by interrupting the water jet.
• Area of application: reprocessing laboratory glassware
• With perforations 7 x 7 mm

Machine affiliation: Can be used for PLW 8617 devices.

Insert for loading different utensils.
• Area of application: reprocessing laboratory glassware
• Suitable for beakers, funnels, breast milk pumps, for example
• With flexible handles

Machine affiliation: Can be used for PLW 8617 devices.

Mobile unit no levels, for cleaning laboratory glassware/utensils.
• For holding inserts and mesh trays
• Depending on the height, up to 6 module scan be used. Load dimensions: H 670, W 565, D 770 mm
• Upper rail and upper strut can be removed. This enables particularly tall modules to be used.

Machine affiliation: Can be used for PLW 8617 devices.

With plastic supports, nozzle diameter 6 mm, length 130 mm, 1 item.
• Area of application: reprocessing laboratory glassware
• Suitable for mobile injector units & baskets screw connection
• Part of the EasyLoad system. The EasyLoad system makes reprocessing laboratory glassware considerably faster, simpler and more reliable. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as height adjustment of the holders is no longer necessary thanks to the smart combination of nozzles and holding frames. This makes correct positioning extremely easy.
• Packaging unit with 1 nozzle

Module for the use of e.g. lab glassware inserts on the top level of A 503 mobile units.
• Area of application: reprocessing laboratory glassware
• With spray arm

Machine affiliation: Can be used for PLW 8617 devices.

With plastic supports, nozzle diameter 6 mm, length 210 mm, 1 item
• Area of application: reprocessing laboratory glassware
• Suitable for mobile injector units & baskets screw connection
• Part of the EasyLoad system. The EasyLoad system makes reprocessing laboratory glassware considerably faster, simpler and more reliable. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as height adjustment of the holders is no longer necessary thanks to the smart combination of nozzles and holding frames. This makes correct positioning extremely easy.
• Packaging unit with 1 nozzle

Module for the optimum reprocessing of large-volume laboratory glassware.
• Can be equipped with injector nozzles based on individual needs
The maximum diameter of the load items depends on the number of nozzles used. Nozzles required depending on items: A 846, A 847 and/or A 848.
• Suitable for 2–10 l laboratory flasks, 2–6 l round flasks
The maximum diameter of the wash items depends on the number of nozzles used. Nozzles required depending on items: A 846, A 847, and/or A 848.
• Suitable for 2–5 l Erlenmeyer flasks, 2–5 l measuring flasks
The maximum diameter of the wash items depends on the number of nozzles used. Nozzles required depending on items: A 846, A 847, and/or A 848.

Machine affiliation: Can be used for PLW 8617 devices for the A 503 mobile unit.

With plastic supports, nozzle diameter 4 mm, length 90 mm, 1 item
• Area of application: reprocessing laboratory glassware
• Suitable for mobile injector units & baskets screw connection
• Part of the EasyLoad system. The EasyLoad system makes reprocessing laboratory glassware considerably faster, simpler and more reliable. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as height adjustment of the holders is no longer necessary thanks to the smart combination of nozzles and holding frames. This makes correct positioning extremely easy.
• Packaging unit with 1 nozzle

Module for the optimum reprocessing of laboratory glassware, 10 injector positions.
• Can be equipped with up to 10 nozzles based on individual needs
Particularly suitable for nozzle diameters of 6 mm, e.g. A 840 or A 841; other diameters are possible depending on the application.
• Part of the EasyLoad system. The EasyLoad system makes reprocessing laboratory glassware considerably faster, simpler and more reliable. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as height adjustment of the holders is no longer necessary thanks to the smart combination of nozzles and holding frames. This makes correct positioning extremely easy.

Machine affiliation: Can be used for PLW 8617 devices for the A 503 mobile unit.

With plastic supports, nozzle diameter 4 mm, length 185 mm, 1 item
• Area of application: reprocessing laboratory glassware
• Suitable for mobile injector units & baskets screw connection
• Part of the EasyLoad system. The EasyLoad system makes reprocessing laboratory glassware considerably faster, simpler and more reliable. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as height adjustment of the holders is no longer necessary thanks to the smart combination of nozzles and holding frames. This makes correct positioning extremely easy.
• Packaging unit with 1 nozzle