All products

The new Solid.Line KBF-S climate chamber is a custom-made solution for long-term testing and accelerated stability testing for pharmaceutical products in accordance with the ICH Q1A guideline. The corrosion-free and condensation-free interior also ensures exceptionally stable temperature and moisture levels, even when fully loaded.
Benefits
• Homogeneous climate conditions thanks to APT.line™ preheating chamber
• Standard-compliant testing according to ICH Q1A
• Precise temperature and humidity control
Important characteristics
• Temperature range: 0 °C to +70 °C
• Humidity range: 20% to 80% RH
• APT.line™ preheating chamber technology
• Humidity regulation with capacitive humidity sensor and steam humidification
• LCD to display temperature and humidity along with additional information and alarms
• Internal data logger, measured values can be read out in open format via USB
• Unit self-test for comprehensive status analysis
• Inner chamber made completely of stainless steel
• 2 stainless steel racks, incl. shelf supports
• Access port with silicone plug, 30 mm, left
• Robust twin casters with brakes, from 240 L
• Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
• Computer interface: Ethernet
• Independent water supply via tank

The BINDER CB series CO₂ incubator is the premium class among the CO₂ incubators. It is suitable for all sensitive incubation applications and ensures optimal cell growth. A BINDER CB series CO₂ incubator can perform complex cultivation experiments as well as specific enviromental conditions.
Benefits
• Maximum usable space with minimal footprint and excellent ease of use
• Minimum risk of contamination thanks to uncompromising hot-air sterilization
• Fanless, easy-to-clean hygienic interior without fixtures
• Stable pH values thanks to drift-free CO₂ IR sensor technology
• Low evaporation of the medium due to high levels of humidity and quick recovery time
Important characteristics
• Temperature range: +4 °C above ambient temperature to +60 °C
• Humidity range: 90 to 95% RH
• CO₂ control range: 0 to 20 vol.% CO₂
• Tried-and-tested anti-contamination concept with 180 °C hot air sterilization
• Optimized double-pan humidification system with condensation protection
• CO₂ gas-mixing jet with Venturi effect
• Hot-air sterilizable CO₂ sensor with single-beam infrared technology
• Intuitive touchscreen controller
• Internal data recording, can be read out in open format via USB interface
• Fail-safe CO₂ system for protecting the pH of cell cultures
• DuoDoor™ system: Unit door and glass door can be opened with one handle
• Tightly fitted inner door made of safety glass
• Lockable door handle
• Seamless inner chamber made of stainless steel with flanges as shelf support system
• Perforated shelves, stainless steel
• Troubleshooting system with visual and acoustic alarms
• Interfaces: Ethernet, USB, zero-voltage alarm contact
• Units can be stacked with stacking adapters; the CB is suitable for stacking with CBF and CB-S models of the same size

Series CB-S incubators are suitable for routine cell cultivation applications: They are free from contamination due to 180 °C hot-air sterilization and reliable pH stability thanks to the drift-free infrared CO₂ measurement system.
Benefits
• Maximum usable space with minimal footprint and excellent ease of use
• Minimum risk of contamination thanks to uncompromising hot air sterilization
• Fanless, easy-to-clean hygienic interior without fixtures
• Simple and fast cleaning thanks to a seamless inner chamber
Important characteristics
• Temperature range: +6 °C above ambient temperature to +50 °C
• Humidity range: 90 to 95% RH
• CO₂ control range: 0 to 20 vol.% CO₂
• Tried-and-tested anti-contamination concept with 180 °C hot air sterilization
• Humidification system with condensation protection
• CO₂ gas mixing jet with Venturi effect
• CO₂ sensor with infrared technology
• LCD to display temperature and CO₂ along with additional information and alarms
• Internal data logger, measured values can be read out in open format via USB
• Tightly fitted inner door made of safety glass
• Seamless stainless steel inner chamber
• Perforated shelves, stainless steel
• Troubleshooting system with visual and acoustic alarms
• Interfaces: Ethernet, USB, zero-voltage alarm contact
• Units can be stacked with stacking adapters; the CB-S is suitable for stacking with CB and CBF models of the same size
Optional equipment
• Copper interior fittings consisting of copper shelves and copper-plated water pan
• Stacking adapter for secure, space-saving installation
• CO₂ gas tank changer for connecting two gas tanks to one or two incubators
• CO₂ shaker with corrosion-resistant components in a stainless-steel housing
• APT-COM Multi Management Software – for managing, recording, and documenting unit parameters
• Services – wide range of services to ensure that the unit functions correctly

Battery test chambers from BINDER are ideal for aging, performance, and stress testing in quality assurance and battery production. To ensure maximum safety, all the chambers in the LIT MK series are fitted with detection and fire suppression equipment as standard. TÜV SÜD AG has recently confirmed that the LIT MK 240 and LIT MK 720 battery test chambers are suitable for EUCAR LEVEL 6.
Benefits
• Safety thanks to extensive protective measures
• Homogeneous climate conditions thanks to APT.line™ preheating chamber
• Extensive programming and data collection
• Excellent overview of the test object thanks to large heated viewing window
Important characteristics
• Temperature range: -40 °C to +110 °C
• Class 2 independent temperature safety device when temperature is set to +120 °C
• Reversible stainless steel pressure relief flap installed in the middle on top of the unit
• Enhanced door-locking mechanism with reinforced brackets
• Monitoring of CO, H₂, O₂, and temperature in testing area atmosphere
• Inertization equipment
• CO₂ fire suppression
• APT.line™ preheating chamber technology
• Programmable condensation protection for samples
• Heated viewing window with LED interior lighting
• BINDER Multi Management Software APT-COM™ basic edition
• Intuitive touchscreen controller with time-segment and real-time programming
• Internal data logger, measured values can be read out in open format via USB
• Access port with silicone plug (Models 240), 50 mm, left
• 2 access ports with silicone plugs (Model 720), 80 mm, left and right
• Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
• Computer interface: Ethernet
• 230 V power socket on the side control panel on the right
• 1 stainless steel rack, can be freely positioned
• CFC-free refrigerant R-452A
• Cooling with compressor cooling unit
• TÜV SÜD confirms that the LIT MK 240 and LIT MK 720 chambers are suitable for EUCAR level 6
Optional equipment
• Electromechanical door-locking mechanism
• Additional access ports available in various sizes and locations
• Multi Management Software APT-COM for managing, recording, and documenting unit parameters
• Services – wide range of services to ensure that the unit functions correctly

As with all circulators from the MAGIO range, the refrigerated circulators stand out thanks to their premium quality, high performance and intuitive operation. The devices offer extra strong pressure and suction pumps, thus fulfilling the highest demands for temperature control of external applications. Whether in basic research, material testing or technical systems – the MAGIO refrigerated circulators offer high-tech solutions for high customer requirements.
• Ideal for demanding external applications
• Simple control of complex applications
• Continuously adjustable, extremely powerful pressure / suction pump
• Flow rate 16 ... 31 l / min, pressure 0.24 ... 0.92 bar, suction 0.03 ... 0.4 bar
• Large, high-resolution TFT touch display with multilingual user interface
• Parts being in contact with the medium made of stainless steel
• Integrated programmer
• External Pt100 sensor connection
• USB interface
• RS232 interface
• Ethernet interface
• Analog interfaces (accessories)
• Classification III according to DIN 12876-1

Liebherr MediLine laboratory fridges the ideal solution for a small footprint or for under-worktop integration. The range comprises two freestanding and under-worktop fridges with a glass door or a solid door. The precise electronic controller enables temperatures to be set accurately. The dynamic cooling system ensures high temperature consistency. Integrated alarm systems guarantee safe storage.
• External temperature and alarm documentation
The laboratory appliances are equipped with a volt-free contact for alarm forwarding to an external remote warning system, as well as with a serial interface RS 485 which enables central documentation of temperature profi les and alarm events. LTM documentation software is optionally available.
• Maximum temperature consistency
The dynamic cooling system in conjunction with the precise electronic controller ensures maximum temperature stability. All laboratory appliances are designed according to the EN 60068 -3 standard with regard to optimum temperature consistency
• Safety thermostat.
The appliances with electronic controllers are equipped with an additional safety thermostat to prevent temperatures dropping below +2°C and to protect sensitive products in the event of a fault.
• External temperature sensor
The laboratory appliances have an access port (diameter 10 mm) on the rear which allows the temperature sensor to be positioned in the interior.

The MediLine range appliances are equipped with many features to guarantee the safety of stored products and temperature stability in the interior. High-quality materials and precise workmanship, extremely efficient refrigeration components as well as documentation and alarm functions ensure optimum storage of sensitive samples, chemicals and research materials.
• Maximum temperature consistency.
Maximum temperature stability in the interior is ensured by the dynamic cooling system with double ventilation. Very short defrost cycles allow the internal temperature to be kept almost constant during the defrost phases. All laboratory appliances are designed according to the EN 60068-3 standard with regard to maximum temperature stability and consistency
• Integrated digital controller.
The intuitive controller with integrated real-time clock allows the temperature to be set to 1/10°C accuracy. The large display allows improved temperature visibility at a glance. The keyboard is dirt resistant and easy to clean – to meet the most stringent hygiene requirements in the laboratory.
• Integrated alarm systems.
A visual and audible door alarm alerts the user to temperature deviations. An alarm is also raised if the door is open for longer than one minute or in the event of power failure.
• Integrated data memory.
The min/max temperature memory function stores the values for up to 41 days. In addition the alarm memory function records the last 3 alarm conditions with alarm type, date and time, duration and maximum temperature.
• Accurate 1-point calibration.
The digital controller includes a calibration function for extremely accurate temperature control and display. This permits compensation between the set temperature and the actual internal temperature. Positive or negative changes to the correction value can be made in steps of 0.1 K.
• Mains-independent power supply of the electronic controller.
In case of power failure, the electronic controller is powered by a battery. The memory continues to log the internal temperature for another 72 hours. If external alarm and monitoring systems have been connected, then data transfer to these is also maintained.
• External temperature sensor.
The laboratory appliances have an access port (diameter 7.0 mm) in the appliance ceiling which allows a temperature sensor to be positioned in the interior.
• External temperature and alarm documentation.
The laboratory appliances are equipped with a volt-free contact for alarm forwarding to an external remote warning system. In addition the appliances have an RS 485 interface which enables as many as 20 appliances to be networked with a central monitoring and alarm system.
• Energy-effi cient hot-gas defrost system/ No temperature spikes.
Defrost less often and faster: the controller calculates the optimum defrost cycles based on the compressor run-time. Then the fridges defrost in just 8 minutes and the freezers in just 12 minutes. The internal temperature is slightly lowered shortly before so it remains almost constant during the defrost cycle.
• Heavy-duty professional stable door.
Quick access, minimal cold loss, maintaining of product quality. Half-door appliances are ideal particularly with the frequent door opening which occurs in the pharmaceutical industry or the laboratory. Samples and compounds used more frequently are stored in the upper area for quick access while below there is plenty of space for materials and raw materials which are needed less frequently. Thanks to the stable doors with their self-closing mechanism, only a small amount of cold air escapes on opening and this helps to maintain temperature stability and therefore the quality of the goods stored over the long term.
• 5 years guarantee

Refrigerated circulators of the DYNEO series distinguish themselves with a great price-performance ratio. The instruments offer high heating/cooling capacities for short heat-up and cool-down times. The refrigerated circulators work precisely and reliably even at higher ambient temperatures up to +40 °C. Either in basic research, in material testing or in technical systems – the DYNEO refrigerated circulators offer functional solutions for every requirement and budget.

With a working temperature range of -20 ... +200 °C, the Refrigerated / heating circulator DYNEO DD-200F delivers an outstanding cooling capacity of kW at 20°C despite its compact design. The optimized design of the bath tank and cooling coil makes the bath more spacious and userfriendly for the operator. Ventilation slots and connections are located on the front and rear, allowing several units to be placed next to each other in order to save space.

Product features

• Optimized cooling coil design saves space in the bath tank
• Powerful and infinitely adjustable pressure pump
• Flow rate 27 l/min, pressure 0.7 bar
• Easy switching between internal and external circulation
• Large color TFT display, multilingual interface
• Central rotary knob (controller) simplifies operation
• Integrated programmer
• Integrated external Pt100 connection
• USB connection
• RS232 interface or analog interfaces (optional)
• Integrated drain makes emptying liquid easy and safe
• Bath cover included with delivery
• Removable ventilation grid
• Powerful cooling machines
• For internal and external applications
• Integrated pump connection M16×1

Refrigerated circulators from the CORIO CP range are suitable for applications with a temperature range up to +200°C. The enhanced pump performance ensures they are suitable for easy temperature control tasks in combination with external applications.

With a working temperature range of -20 ... +200 °C, the Refrigerated / heating circulator CORIO CP-200F delivers an outstanding cooling capacity of kW at 20°C despite its compact design. The optimized design of the bath tank and cooling coil makes the bath more spacious and user-friendly for the operator. Ventilation slots and connections are located on the front and rear, allowing several units to be placed next to each other in order to save space.

Product features

• Models for internal and external applications
• Bright, white, easy to read display
• Very quiet
• Powerful and infinitely adjustable pressure pump
• USB connection
• RS232 interface for online communication
• Bath lid and drain tap included
• Removable ventilation grid
• Refrigeration unit without side vents
• Class III (FL) according to DIN 12876-1
• Easy switching between internal and external circulation
• Integrated pump connection M16×1
• Space-saving cooling coil design yields more usable space in the bath tank
• Early warning system for low liquid level

With a maximum of +300 °C and various programming options the M series material test chambers are ideal for material and aging tests. With a high air flow, the powerful fans ensure rapid heating.

BENEFITS

• Uniform drying conditions thanks to APT.line™ technology
• Identical test conditions throughout the chamber interior independent of sample size and quantity
• Outstanding thermal insulation saves operation costs
• Advanced programming options

IMPORTANT CHARACTERISTICS

Temperature range: +15°C above ambient temperature to +300°C
High temperature accuracy thanks to APT.line™ technology with increased heating output
Reinforced fan with adjustable speed
Electromechanical control of the exhaust air flap
Intuitive touchscreen controller with time-segment and real-time programming
2 chrome-plated racks
Class 2 independent adjustable temperature safety device (DIN 12880) and class 3.1 independent temperature safety device (DIN 12880) with visual/ acoustic alarm available for selection on the controller
Failsafe function – backup sensor Pt 100
Computer interface: Ethernet
Internal data logger, measured values can be read out in open format via USB

A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and particularly fast heating – even for chambers under full loads.

Product benefits

• Uniform drying conditions thanks to APT.line™ technology
• Identical test conditions throughout the chamber interior independent of sample size and quantity
• Outstanding thermal insulation saves operation costs
• Advanced programming options

Main features

• Temperature range: +10 °C above ambient temperature up to +300 °C
• High temperature accuracy thanks to APT.line™ technology
• Adjustable fan speed
• Controller with interval and real-time programming
• Electromechanical control of the exhaust air flap
• 2 chrome-plated racks
• Units up to 115 liters are stackable
• Class 2 independent adjustable temperature safety device (DIN 12880) and class 3.1 independent temperature safety device (DIN 12880) with visual/acoustic alarm available for selection on the controller
• Ergonomic handle design
• Computer interface: Ethernet
• Internal data logger, measured values can be read out in open format via USB

High-performance ultrasonic cleaner for versatile applications

The proven and particularly robust SONOREX ultrasonic baths clean thoroughly and gently by means of intensive cavitation bubbles, even in the hard-to-reach places of the cleaning objects.

A user-friendly rotary handle control is used for easy adjustment of the cleaning time. Matching baskets, lids and cleaning and disinfection concentrates are available as accessories for optimally coordinated ultrasonic cleaning.

The SONOREX TECHNIK range currently consists of 4 series with common characteristics:

• welded stainless steel cleaning tank, 2 mm
• overflow gutter: combined with an oil separator and or a filtering system to continuously remove dirt, oils and grease floating on the surface of the tank
• cleaning fluid filling level mark, facilitates dosing
• welded drain with three-way ball valve for emptying or filling the tank and connecting a filtration system
• additional drain for connecting an oil separator and draining the overflow gutter
• heating: all models are available with (UH) or without (U) heating: on / off with control indicator, thermostatic, adjustable from 30 to 80 ° C
• case protected against drops of water in stainless steel
• for baskets, possibility of having a motorized lift with agitation function
• possibility of making sets of 2 to 5 stations with ultrasonic bath, rinsing bath, drying tank with a motorized translator / elevator / agitator
• inclined tank bottom for better cleaning results by optimal sound propagation. This facilitates the emptying of the tank and makes it possible to avoid as much as possible the accumulation of dirt and residual liquids at the bottom of the tank
• ultrasound: on / off with control indicator, timer 1 to 15 min. or continuous operation
• 40 kHz frequency generator (built-in)

Hei‐PLATE Mix'n'Heat Core+ + Pt 1000 (V4A) + Heat‐On 1 L Block + Findenser 29/24 + Findenser™ attachment kit
Includes: Magnetic stirrer Hei-PLATE Mix 'n' Heat Core+ (145 mm diameter). Fast and precise heating - Without overshoot - Gentle to the sample, Pt1000 - enables precise temperature regulation, 1 L Heat-On Blocks - ensures optimal heat transfer without the use of water or oil. Findenser™ - completes the system as a high-performance condenser that is used without the use of water. The performance is optimal for solvent volumes up to 1 L.
The magnetic stirrer Hei-PLATE Mix 'n' Heat Core+ offers you a digital display for setting your desired temperature to the degree. This precise temperature without overshooting is controlled by two selectable heating modes (FAST/PRECISE) and the optional external temperature sensor Pt1000.
It convinces with its robust design and its sophisticated functionalities, such as its key and knob illumination, which provides information about active functions at any time. The dynamic rotary knobs respond to turning speed - slow for precise adjustments, or fast for bigger jumps. The locking function protects against accidental changing of the values. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures > 50 °C, protect against burns. A carrying aid on the underside ensures safe transport.
• Circular scratch-resistant, chemical-resistant mixing plate with Kera-Disk coating
• Plate diameter ø: 145 mm
• Temperature range: 20 – 300 °C
• Heating power: 800 W
• Rotation speed range: 100… 1400 rpm
• Accuracy temperature setting: ± 1 K
• Speed accuracy: ± 2 %
• Max. stirring capacity (H₂O): 20 l
• The appliance has a residual heat indication
• Maximum load: 25 kg
• Protection class IEC 60529: IP 42
• The high performance Findenser™ as standard size (400 mm) is for syntheses under reflux with solvent voluments up to 1 liter. It can be secured with standard laboratory clamps or with the Findenser™ attachment kit (sold separately). Save water, space and costs with Findenser™!

Hei‐PLATE Mix'n'Heat Core+ and Pt 1000 (V4A) + Pt 1000 clamping system

Includes: Magnetic stirrer Hei-PLATE Mix 'n' Heat Core+ (145 mm diameter) - Fast and precise heating - Without overshoot - For sample-friendly work, Pt1000 temperature sensor for precise temperature regulation, Pt1000 holder with cable device for securely attaching the temperature sensor and silicone protective cover for a longer lasting protection of your magnetic stirrer.
The magnetic stirrer Hei-PLATE Mix 'n' Heat Core+ offers you a digital display for setting your desired temperature to the degree. This precise temperature without overshooting is controlled by two selectable heating modes (FAST/PRECISE) and the optional external temperature sensor Pt1000.

It convinces with its robust design and its sophisticated functionalities, such as its key and knob illumination, which provides information about active functions at any time. The dynamic rotary knobs respond to turning speed - slow for precise adjustments, or fast for bigger jumps. The locking function protects against accidental changing of the values. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures > 50 °C, protect against burns. A carrying aid on the underside ensures safe transport.

• Circular scratch-resistant, chemical-resistant mixing plate with Kera-Disk coating
• Plate diameter ø: 145 mm
• Temperature range: 20 – 300 °C
• Heating power: 800 W
• Rotation speed range: 100… 1400 rpm
• Accuracy temperature setting: ± 1 K
• Speed accuracy: ± 2 %
• Max. stirring capacity (H₂O): 20 l
• The appliance has a residual heat indication
• Maximum load: 25 kg
• Protection class IEC 60529: IP 42
• Also available with 135 mm plate on request