All products


% Bimos Labsit laboratory stool with castors Labsit laboratory stool with castors Simple yet intelligent - Labsit is the clever all-round solution for sitting in the most innovative environment there is: the laboratory. Boasting a hygienic design, compact dimensions, ergonomic construction and user comfort, the Labsit masters all the challenges faced by the modern laboratory chair. The same, of course, applies for the flexible laboratory stool from the same collection. • Integral foam • Suitable for cleanrooms in air purity class 3, acc. to EN ISO 14644-1 • GMP compatible	% Miele PLW 8617 D TH laboratory dishwasher Lab washer, electrically heated- single door, with pre-heating tank, 1150 mm wide, 351 l usable capacity. • Capacity/cycle, e.g.216 laboratory flasks, 588vials or 294pipettes • Short cycle times thanks to pre-heated demineralised water • Flexible and simple – modular load carriers & EasyLoad system • Efficient – strong pump power with the variable-speed pump • Reliable results – spray arm monitoring and conductivity meter • Construction type: freestanding, 1 glass vertical sliding door • Heating type: electricity • Loading with loading carriages • Electrical door lock • Wash cabinet usable capacity 351 l • Control system: PST 20 • Full-touch colour display • Programmability: programmable • Programmes: 30 • Free programme positions: 170 • Time left display • Status display via chamber lighting • Selectable display languages • Water connection/drainage • Cold water: 2 • Hot water: 1 • DI water: 2 • Drain pump (optional) • Compressed air connection • Drying unit • Heating mode drying unit • HEPA filter class: H13 • Filtration efficiency HEPA filter (DIN EN 1822) in %: 99,950 • External dimensions (h x w x d) (mm): 1,670x1150x990 • Net weight in kg: 395 • 2 integrated diaphragm dispenser pumps for liquid media • Additional integrated dispenser pumps: 4 • Heated tank for pre-heating DI water • Steam condenser (optional) • Volumetric dispensing control • Connection options • Ethernet interface • External dispenser modules • USB interface • Central dispensing	% Heidolph Hei-FLOW Core 600 Peristaltic pump Reliable, robust model for standard applications with higher volume flows • To perform everyday laboratory tasks • The speed can be adjusted analogically with a rotary knob • Control electronics ensure speed control, even in case of variable load • The dosing direction can be adjusted with a manual switch • The device is protected against overheating • CANNOT be converted into a multi-channel pump • Speed: 50...600 1/min • Volume flow in single-channel operation: 4.0...4151 ml/min •Sspeed accuracy: ±2 % Pump heads and piping must be ordered separately.	% Binder B 28 Standard-Incubators with mechanical adjustment Safe and reproducible results even under high batch throughputs in long-term operation Technical specifications: • Temperature range: 30 °C to 70 °C • Hydro-mechanical thermostat • Inner door made of tempered safety glass • Analog temperature setting and display • Stackable
% Vacuubrand chemistry-HYBRID pump RC 6 The RC 6 chemistry-HYBRID pump is a combination of a two-stage rotary vane pump and a two-stage chemistry diaphragm pump for optimized corrosion resistance. The diaphragm pump maintains the oil reservoir under vacuum in order to keep the partial pressures of solvent vapors at levels below their condensation points and to reduce largely the concentration of oxygen and corrosive gases. Therefore the RC 6 chemistry-HYBRID pump has a much higher solvent vapor pumping capability and resistance to aggressive gases than conventional rotary vane pumps. Performance features: • Reduced internal corrosion, even when working with corrosive vapors • Oil changes typically reduced 90% or more compared with rotary vane pumps alone • Most economical solution: In practical operation a cold trap is often no longer necessary • Ease of maintenance due to telescopic design Technical Data: • Number of heads: 2 • Inlet connection: small flange KF DN 16 • Ultimate vacuum with gas ballast: 0.01 mbar	% Bandelin SONOCOOL 255.2 ultrasonic bath with cooling Ultrasonic bath with cooling as a ready-to-use set for use in pathology consisting of: • Ultrasonic bath SC 255.2 • Specimen holder PH 255-11 • Lid D 255 G made of glass • Insert beaker • 20 pieces SD 01.2, made of glass (100 ml) • TICKOPUR TR 3 - 1 L (contact liquid, concentrate.) In pathology as well as in the analysis laboratory, ultrasound is now an integral part when it comes to fast diagnostics and high process efficiency. The SONOCOOL now combines the process-accelerating effect of ultrasound with simultaneous cooling of the samples. In the histological evaluation of samples, e.g. in the field of oncology, bone decalcification is an important process step, because only decalcified samples can be prepared without artefacts for later diagnosis. The previously lengthy process can now be significantly accelerated compared to conventional methods using ultrasound. At the same time, the morphological structure of the specimens is preserved by the integrated cooling. This avoids an inferior specimen and thus a more difficult or impossible diagnosis. The findings are available more quickly. Advantages: - Compact design, long durability due to welded tub made of stainless steel V4A 2 mm, glass lid for sample observation and easy cleaning, safety due to level monitoring, illuminated LCD display for indication of Remaining time Actual temperature Pause/Diagnosis Set time/Set temperature Ultrasonic power.	% Binder WIC 1 Walk-in-Chamber The Binder Environmental Walk-in Chambers with either 6 m², 9 m² or 12 m² internal dimensions and 2,3 m height are an excellent choice for stability testing in Pharma, Food & Beverage, Cosmetics, Material Testing and many other fields of application. In Pharma, the Binder Walk-in Chambers cover long-term and accelerated stability test conditions as specified in the ICH Q1A (R2) for new drug substances and drug products. The walk-in chambers are designed and produced in Germany, and the temperature and environmental conditioners are made by Parameter Generation and Control in Black Mountain, NC USA. The chambers offer a wide range of features and benefits to perfectly meet requirements in stability testing. Product features • Long-term and accelerated stability tests according to the guidelines of ICH Q1R (R2) • Temperature accuracy: ± 1.5°C • Humidity range (% rH): 20...90 • Humidity accuracy: ± 2.5% RH • High-efficiency insulation panels with a U-value of 0.21 W/m2K • Motion sensor LED lighting • Entire inner chamber made of stainless steel • External service access to the conditioning unit • Safety lockable door, which can always be opened from the inside • Environmentally friendly refrigerant R450A • Power supply: 230V / 50Hz, 11.5A • Available accessories: shelving system, ramp	% Miele A 100 upper basket For the optimum loading of injector modules or inserts. • Area of application: reprocessing pipettes/vials and laboratory glassware • Upper basket with two module connections • For holding up to 2 injector modules or inserts • Automatic closing of the connections when not in use • Loading height with module with plastic supports 190 mm • Clearances: width 489, length 440 mm Machine affiliation: Can be used in PG 8504, PG 8583, PG 8583 CD, PG 8593 devices.
% Miele A 11/2 insert for the gentle cleaning of delicate load items by interrupting the water jet Insert for the gentle cleaning of delicate load items by interrupting the water jet. • With perforations 7 x 7 mm • For use in upper and lower basket	% Binder CBF 170 CO₂ incubator The BINDER CBF is the high-end CO2 incubator with humidity control that is suitable for all sensitive incubation applications in GMP environments. It ensures consistentresults including in cell-based assays with multiwell plates. This BINDER incubator is even suitable for complex cultivation experiments or individual environments with hypoxic conditions thanks to its comprehensive assortment of options and accessories. BENEFITS • Safe – cell cultures receive maximum protection against contamination • Reliable – constant well-being conditions for the cells • Smart – simple routine cleaning and convenient operation • Economical – efficient operation without consumables MAIN FEATURES • Contamination-safe humidification system without water pan • Tried-and-tested anti-contamination concept with 180 °C hot air sterilization • Hot-air sterilizable CO2 sensor with single-beam infrared technology • Seamless inner chamber made of stainless steel with flanges as shelf support system • Fanless interior with Venturi CO2 gas mixing nozzle • Intuitive touchscreen controller • Internal data logger, measured values can be read out in open format via USB • Troubleshooting system with visual and acoustic alarms • Interfaces: Ethernet, USB, zero-voltage alarm contact • Fail-safe CO2 system for protecting the pH of cell cultures	% DÜPERTHAL ACID LINE C pro XS safety storage cabinet For the storage of acids and lye ACID line safety storage cabinets are optimized specifically for the storage of acids and lye. The varied additional functionalities of the cabinets of the ACID line increase workplace safety and comfort. • Innovative design enables optimized air exchange. • All doors of the ACID line cabinets are separately lockable to provide access control and increase security. • Highly media-resistant safety storage cabinets for the safe storage of aggressive substances. • Pull-out trays made of polyethylene. • Scratch, impact and wear resistant inner and outer carcass constructed from 19 mm (0.75 inch) melamine-resin-coated decor panels. • The doors are generally right-hinged for one-door cabinets. A left-hung door can be delivered at no extra charge.	% Bimos Labsit 2 laboratory chair Labsit is the clever all-round solution for sitting in the most innovative environment there is: the laboratory. • Boasting a hygienic design • Compact dimensions • Ergonomic construction and user comfort • Large range of colours • Robust and light • Anti-bacterial upholstery • Minimal joints and positive-locking • Intuitive handling • Innovative Flex functions • Resistant to disinfectants • Electrostatically dissipative (optional) • Very economical • 10 year guarantee – including on gas pressure springs
% Bimos Unitec 1 Industrial swivel chair Work chairs in production • The Unitec work chair is the low-cost entry-level model for correct sitting in production environments. • Its permanent contact backrest, a standard feature, provides staff with support when working in a seated position. • The generous seating surfaces and backrests also ensure additional stabiliuty. • With its selection of various covers, Unitec optically adapts to almost any working environment. This makes it a simple work chair for practically any application.	% Binder WIC 2 Walk-in-Chamber The Binder Environmental Walk-in Chambers with either 6 m², 9 m² or 12 m² internal dimensions and 2,3 m height are an excellent choice for stability testing in Pharma, Food & Beverage, Cosmetics, Material Testing and many other fields of application. In Pharma, the Binder Walk-in Chambers cover long-term and accelerated stability test conditions as specified in the ICH Q1A (R2) for new drug substances and drug products. The walk-in chambers are designed and produced in Germany, and the temperature and environmental conditioners are made by Parameter Generation and Control in Black Mountain, NC USA. The chambers offer a wide range of features and benefits to perfectly meet requirements in stability testing. Product features • Long-term and accelerated stability tests according to the guidelines of ICH Q1R (R2) • Temperature accuracy: ± 1.5°C • Humidity range (% rH): 20...90 • Humidity accuracy: ± 2.5% RH • High-efficiency insulation panels with a U-value of 0.21 W/m2K • Motion sensor LED lighting • Entire inner chamber made of stainless steel • External service access to the conditioning unit • Safety lockable door, which can always be opened from the inside • Environmentally friendly refrigerant R450A • Power supply: 230V / 50Hz, 11.5A • Available accessories: shelving system, ramp	% Miele A 101 upper basket Height adjustable, for the optimum loading of inserts. • Area of application: reprocessing laboratory glassware and different utensils • Vertical clearance 160 +/- 30 mm, width 475 mm, depth 443 mm • With integrated spray arm Machine affiliation: Can be used in PG 8504, PG 8583, PG 8583 CD, PG 8593 devices.	% Miele A 12/2 insert for the gentle cleaning of delicate load items by interrupting the water jet Insert for the gentle cleaning of delicate load items by interrupting the water jet. • With perforations 7 x 7 mm • For use in upper and lower basket
% Binder CBF 260 CO₂ incubator The BINDER CBF is the high-end CO2 incubator with humidity control that is suitable for all sensitive incubation applications in GMP environments. It ensures consistent results including in cell-based assays with multiwell plates. This BINDER incubator is even suitable for complex cultivation experiments or individual environments with hypoxic conditions thanks to its comprehensive assortment of options and accessories. BENEFITS • Safe – cell cultures receive maximum protection against contamination • Reliable – constant well-being conditions for the cells • Smart – simple routine cleaning and convenient operation • Economical – efficient operation without consumables MAIN FEATURES • Contamination-safe humidification system without water pan • Tried-and-tested anti-contamination concept with 180 °C hot air sterilization • Hot-air sterilizable CO2 sensor with single-beam infrared technology • Seamless inner chamber made of stainless steel with flanges as shelf support system • Fanless interior with Venturi CO2 gas mixing nozzle • Intuitive touchscreen controller • Internal data logger, measured values can be read out in open format via USB • Troubleshooting system with visual and acoustic alarms • Interfaces: Ethernet, USB, zero-voltage alarm contact • Fail-safe CO2 system for protecting the pH of cell cultures	% DÜPERTHAL ACID LINE C pro S safety storage cabinet For the storage of acids and lye ACID line safety storage cabinets are optimized specifically for the storage of acids and lye. The varied additional functionalities of the cabinets of the ACID line increase workplace safety and comfort. • Innovative design enables optimized air exchange. • All doors of the ACID line cabinets are separately lockable to provide access control and increase security. • Highly media-resistant safety storage cabinets for the safe storage of aggressive substances. • Pull-out trays made of polyethylene. • Scratch, impact and wear resistant inner and outer carcass constructed from 19 mm (0.75 inch) melamine-resin-coated decor panels. • The doors are generally right-hinged for one-door cabinets. A left-hung door can be delivered at no extra charge.	% Bimos Labsit 3 laboratory chair Labsit is the clever all-round solution for sitting in the most innovative environment there is: the laboratory. • Boasting a hygienic design • Compact dimensions • Ergonomic construction and user comfort • Large range of colours • Robust and light • Anti-bacterial upholstery • Minimal joints and positive-locking • Intuitive handling • Innovative Flex functions • Resistant to disinfectants • Electrostatically dissipative (optional) • Very economical • 10 year guarantee – including on gas pressure springs	% Bimos Unitec 2 Industrial swivel chair Work chairs in production • The Unitec work chair is the low-cost entry-level model for correct sitting in production environments. • Its permanent contact backrest, a standard feature, provides staff with support when working in a seated position. • The generous seating surfaces and backrests also ensure additional stabiliuty. • With its selection of various covers, Unitec optically adapts to almost any working environment. This makes it a simple work chair for practically any application.