All products


% Miele PLW 8636 [LAB] SST laboratory washer Laboratory washer w. liquid dispensing, DryPlus and oil-resistant door seals • Construction type: Freestanding, wide • Casing: Stainless Steel • Number of wash levels: 2 • Salt container in the wash cabinet ceiling • Electric door lock Control system • Control type: SPS • Programmable • Selectable display languages Standard electrical connection • Electrical connection: 3N AC 400V 50HZ • Total rated load in kW: 9,2 Water connection/drainage • Cold water [number]: 1 • Cold water for steam condenser: 2 • Hot water [number]: 1 • DI water [number]: 1 • Required flow pressure in kPa: 200-1000 Drying unit • Air throughput in m³/h: 66 • HEPA filter class H14, HEPA filter filtration efficiency (in accordance with DIN EN1822) in %: 99,99, • Heat dissipation into the room in MJ/h: 4,32 Features • 2 integrated dispenser pumps and containers for liquid media • Additional integrated dispensing pump 5–10 l (optional) • Suction lance for media canisters 10–20 l (optional) • Automatic empty level detection • Additional integrated dispenser pumps (optional) • Dispensing monitoring with oval-wheel counter (optional) • Connection for external recycling tank (option) • Spray pressure monitoring, redundant temperature monitoring • Triple water filter system • Interface for process documentation • Pump with high circulation rate • Load carrier – direct coupling • USB Customer Service interface • Setting options for process chemicals (3 x 5 l / 2 x 10 l) • Wash cabinet seamlessly welded using laser technology • Heater elements outside wash cabinet • Wash cabinet made from high-quality stainless steel (1.4301/304) Connection options • Ethernet interface	% Binder KBF PRO 260 Constant climate chamber with expanded temperature / humidity range A powerful all-rounder among constant climate chambers: Equipped with all kinds of sophisticated technology, the KBF PRO takes any material test in its stride – whether it takes place at -20°C or under THB conditions at +85°C and 85% relative humidity. It offers flexible water supply options for all installation sites and consumes up to 40% less energy than its predecessor, the KMF model. Product features • Temperature range: -20°C to +100°C • Humidity range: 10% to 98% RH • Proven APT.line™ preheating chamber technology • Up to 40% lower energy consumption compared to the previous model • Energy-efficient cooling with modern inverter cooling unit • Cooling with climate-neutral R-290 refrigerant • Door heating to prevent condensation • Adjustable fan speed • Humidity regulation with capacitive humidity sensor and responsive steam humidification • Housing design with HIT technology • Stainless-steel inner chamber • Inner doors made of metal oxide-coated safety glass • Two racks with stainless-steel telescopic rails • Large access port with silicone plug • Floor-standing units featuring robust twin casters with brakes at the front • Stackable tabletop units with a volume of up to 130 liters • Intuitive touchscreen controller with time-segment and real-time programming • Ergonomically adjustable control terminal (for units with a volume of 470 liters and above) • Signal triangle with light-up status display (for units with a volume of 470 liters and above) • Internal data logger, measured values can be read out in open format via USB • Class 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarms • Unit self-test for comprehensive status analysis • Data interfaces: Ethernet, USB • BINDER Multi Management Software APT-COM™ basic edition • Optional light modules for ICH photostability testing (for models 260, 470, 720) • Optional LED light modules for plant growth (for models from 260)	% Heidolph Hei‐PLATE Mix'n'Heat Core - with heating The speed and temperature are set using a scale. This magnetic stirrer is very easy to use and is equipped with the most important safety features. The large safety distance between the heating plate and the control elements, as well as the optical residual heat indicator at temperatures > 50 °C, protect against burns. A carrying aid on the underside ensures safe transport. The heating function can be activated separately and is indicated by the LED button lighting up. • Circular scratch-resistant, chemical-resistant mixing plate with Kera-Disk coating • Plate diameter ø: 145 mm • Temperature range: 20 – 300 °C • Heating power: 800 W • Rotation speed range: 100… 1400 rpm • Speed accuracy: ± 2 % • Max. stirring capacity (H₂O): 20 l • The appliance has a residual heat indication • Maximum load: 25 kg • Protection class IEC 60529: IP 42	% DÜPERTHAL ACID LINE B pro S safety storage cabinet For the storage of acids and lye ACID line safety storage cabinets are optimized specifically for the storage of acids and lye. The varied additional functionalities of the cabinets of the ACID line increase workplace safety and comfort. • Innovative design enables optimized air exchange. • All doors of the ACID line cabinets are separately lockable to provide access control and increase security. • Highly media-resistant safety storage cabinets for the safe storage of aggressive substances. • Pull-out trays made of polyethylene, storage levels: 2, storage areas: 2 • Scratch, impact and wear resistant inner and outer carcass constructed from 19 mm (0.75 inch) melamine-resin-coated decor panels. • The doors are generally right-hinged for one-door cabinets. A left-hung door can be delivered at no extra charge.
% Miele PLW 8636 [LAB MON] SST laboratory washer Laboratory washer w. liquid dispensing, DryPlus, process monitoring and oil-resistant door seals • Construction type: Freestanding, wide • Casing: Stainless Steel • Number of wash levels: 2 • Salt container in the wash cabinet ceiling • Electric door lock Control system • Control type: SPS • Programmable • Selectable display languages Standard electrical connection • Electrical connection: 3N AC 400V 50HZ • Total rated load in kW: 9,2 Water connection/drainage • Cold water [number]: 1 • Cold water for steam condenser: 2 • Hot water [number]: 1 • DI water [number]: 1 • Required flow pressure in kPa: 200-1000 Drying unit • Air throughput in m³/h: 66 • HEPA filter class H14, HEPA filter filtration efficiency (in accordance with DIN EN1822) in %: 99,99, • Heat dissipation into the room in MJ/h: 4,32 Features • 2 integrated dispenser pumps and containers for liquid media • Additional integrated dispensing pump 5–10 l (optional) • Suction lance for media canisters 10–20 l (optional) • DOS monitoring (optional) • Automatic empty level detection • Additional integrated dispenser pumps (optional) • Dispensing monitoring with oval-wheel counter • Connection for external recycling tank (option) • Spray and arm pressure monitoring, redundant temperature monitoring • Triple water filter system • Interface for process documentation • Pump with high circulation rate • Load carrier – direct coupling • USB Customer Service interface • Setting options for process chemicals (3 x 5 l / 2 x 10 l) • Wash cabinet seamlessly welded using laser technology • Heater elements outside wash cabinet • Wash cabinet made from high-quality stainless steel (1.4301/304) Connection options • Ethernet interface	% Binder KBF PRO 470 Constant climate chamber with expanded temperature / humidity range A powerful all-rounder among constant climate chambers: Equipped with all kinds of sophisticated technology, the KBF PRO takes any material test in its stride – whether it takes place at -20°C or under THB conditions at +85°C and 85% relative humidity. It offers flexible water supply options for all installation sites and consumes up to 40% less energy than its predecessor, the KMF model. Product features • Temperature range: -20°C to +100°C • Humidity range: 10% to 98% RH • Proven APT.line™ preheating chamber technology • Up to 40% lower energy consumption compared to the previous model • Energy-efficient cooling with modern inverter cooling unit • Cooling with climate-neutral R-290 refrigerant • Door heating to prevent condensation • Adjustable fan speed • Humidity regulation with capacitive humidity sensor and responsive steam humidification • Housing design with HIT technology • Stainless-steel inner chamber • Inner doors made of metal oxide-coated safety glass • Two racks with stainless-steel telescopic rails • Large access port with silicone plug • Floor-standing units featuring robust twin casters with brakes at the front • Stackable tabletop units with a volume of up to 130 liters • Intuitive touchscreen controller with time-segment and real-time programming • Ergonomically adjustable control terminal (for units with a volume of 470 liters and above) • Signal triangle with light-up status display (for units with a volume of 470 liters and above) • Internal data logger, measured values can be read out in open format via USB • Class 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarms • Unit self-test for comprehensive status analysis • Data interfaces: Ethernet, USB • BINDER Multi Management Software APT-COM™ basic edition • Optional light modules for ICH photostability testing (for models 260, 470, 720) • Optional LED light modules for plant growth (for models from 260)	% Bimos LABSIT STOOL laboratory swivel chair Simple yet intelligent - Labsit is the clever all-round solution for sitting in the most innovative environment there is: the laboratory. Boasting a hygienic design, compact dimensions, ergonomic construction and user comfort, the Labsit masters all the challenges faced by the modern laboratory chair. The same, of course, applies for the flexible laboratory stool from the same collection. Product features • Skintec upholstery, black, soft, yet resistant and easy-to-clean surface • Footrest: black polyamide (optional: aluminum) • Suitable for cleanrooms in air purity class 3, acc. to EN ISO 14644-1 • GMP compatible • 10 year guarantee Other configurations available	% Esco AC2-5E8 G4 Airstream® G4 Class II biological safety cabinet Introducing Airstream® (E-series) G4 Class II Biosafety Cabinet. The new BSC with Centurion Touchscreen controller is EN12469-certified with standby height that easily activates standby mode, an ergonomic work zone that is comprised of bright illumination using industry-leading dimmable LED combined with raised, durable, stainless-steel armrest. It also comes with wider model options offering stainless steel (S-series) and glass (E-series) side wall variants. The Airstream® (E-series) G4 incorporates greener features, ensuring a more sustainable and environmentally friendly operation. With its compact size and advanced features, this biosafety cabinet offers an unparalleled level of convenience and safety, making it the ideal choice for laboratories and research facilities. Features Centurion Touchscreen Controller • Intuitive, comprehensive, and easy-to-understand • Virtually comprehensible safety information and cabinet alarms via 3D BSC diagram • Defined details of alarm types with clear instructions for proper intervention • Centered and angled down for easy reach & viewing • Selectable Quickstart mode for fast operation Dimmable LED • Adjustable work zone brightness • Ideal light intensity of 1000 lux • Saves energy and optimizes work comfort Working Area (E series) • Multi-piece work tray is designed to accommodate autoclavable sizes, catering to user needs for sterilization and handling. Ergonomic Armrest • Full length arm rest for user comfort Ergonomic Sash • Frameless, shatterproof, and UV-absorbing tempered glass • Designed with a 10° angle to enhance user comfort during operation. USB Port and Remote Modbus • USB port to access cabinet data log and BMS connectivity • Newly integrated Remote Modbus feature for users to securely access the cabinet remotely from external devices. Cabinet Construction (E series) • UV absorbing tempered glass with side capture zones and negative pressure to optimize containment efficiency Green Product • Equipped with energy-efficient DC ECM that allows up to 70% energy savings vs AC motor • Standby mode to reduced power consumption Advanced Filtration System • Creates ISO Class 3 work zone instead of industry-standard, ISO Class 5 • Long filter life for lower operating cost, up to 10 years • 99.999% at 0.1 to 0.3 micron, ULPA as per IEST-RP-CC001.3 USA 99.999% at MPPS, H14 as per EN 1822 EU Isocide™ Antimicrobial Powder Coating • Eliminates 99.9% of surface bacteria within 24 hours of exposure
% Vestfrost VT146 Laboratory Chest Freezer The Vestfrost VT146 is a reliable, low-temperature laboratory chest freezer capable of maintaining temperatures as low as −45 °C. It is an excellent choice for hospitals, laboratories, and research institutions where stable, safe, and energy-efficient storage is essential. Product Features • Temperature range: −10 °C to −45 °C • Outstanding temperature stability: ±5.5 °C uniformity relative to the setpoint • Easy-to-clean interior: smooth, painted steel surface • Static cooling system with single compressor • Energy consumption: approx. 1.865 kWh / 24 hours (≈ 681 kWh/year) • Insulation: 80 mm thick polyurethane foam with cyclopentane • Alarms: high/low temperature, probe failure • XR30CX digital controller with 3-digit display • Lockable lid, 1 steel basket with plastic coating • Porthole (Ø12 mm) for external probe or monitoring system • Mobile design: equipped with castors	% Binder KBF PRO 720 Constant climate chamber with expanded temperature / humidity range A powerful all-rounder among constant climate chambers: Equipped with all kinds of sophisticated technology, the KBF PRO takes any material test in its stride – whether it takes place at -20°C or under THB conditions at +85°C and 85% relative humidity. It offers flexible water supply options for all installation sites and consumes up to 40% less energy than its predecessor, the KMF model. Product features • Temperature range: -20°C to +100°C • Humidity range: 10% to 98% RH • Proven APT.line™ preheating chamber technology • Up to 40% lower energy consumption compared to the previous model • Energy-efficient cooling with modern inverter cooling unit • Cooling with climate-neutral R-290 refrigerant • Door heating to prevent condensation • Adjustable fan speed • Humidity regulation with capacitive humidity sensor and responsive steam humidification • Housing design with HIT technology • Stainless-steel inner chamber • Inner doors made of metal oxide-coated safety glass • Two racks with stainless-steel telescopic rails • Large access port with silicone plug • Floor-standing units featuring robust twin casters with brakes at the front • Stackable tabletop units with a volume of up to 130 liters • Intuitive touchscreen controller with time-segment and real-time programming • Ergonomically adjustable control terminal (for units with a volume of 470 liters and above) • Signal triangle with light-up status display (for units with a volume of 470 liters and above) • Internal data logger, measured values can be read out in open format via USB • Class 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarms • Unit self-test for comprehensive status analysis • Data interfaces: Ethernet, USB • BINDER Multi Management Software APT-COM™ basic edition • Optional light modules for ICH photostability testing (for models 260, 470, 720) • Optional LED light modules for plant growth (for models from 260)	% Heidolph Hei‐PLATE Mix'n'Heat Core+ - with heating It convinces with its robust design and its sophisticated functionalities, such as its key and knob illumination, which provides information about active functions at any time. The dynamic rotary knobs respond to turning speed - slow for precise adjustments, or fast for bigger jumps. The locking function protects against accidental changing of the values. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures > 50 °C, protect against burns. A carrying aid on the underside ensures safe transport. The magnetic stirrer Hei-PLATE Mix 'n' Heat Core+ offers you a digital display for setting your desired temperature to the degree. This precise temperature without overshooting is controlled by two selectable heating modes (FAST/PRECISE) and the optional external temperature sensor Pt1000. • Circular scratch-resistant, chemical-resistant mixing plate with Kera-Disk coating • Plate diameter ø: 145 mm • Temperature range: 20 – 300 °C • Heating power: 800 W • Rotation speed range: 100… 1400 rpm • Accuracy temperature setting: ± 1 K • Speed accuracy: ± 2 % • Max. stirring capacity (H₂O): 20 l • The appliance has a residual heat indication • Maximum load: 25 kg • Protection class IEC 60529: IP 42 • Pt1000: optional, can be ordered separately for the product	% DÜPERTHAL ACID LINE B pro L safety storage cabinet For the storage of acids and lye ACID line safety storage cabinets are optimized specifically for the storage of acids and lye. The varied additional functionalities of the cabinets of the ACID line increase workplace safety and comfort. • Innovative design enables optimized air exchange. • All doors of the ACID line cabinets are separately lockable to provide access control and increase security. • Highly media-resistant safety storage cabinets for the safe storage of aggressive substances. • Pull-out trays made of polyethylene, storage levels: 2, storage areas: 4 • Scratch, impact and wear resistant inner and outer carcass constructed from 19 mm (0.75 inch) melamine-resin-coated decor panels. • The doors are generally right-hinged for one-door cabinets. A left-hung door can be delivered at no extra charge.
% Vestfrost VT147 Laboratory Chest Freezer The Vestfrost VT147 is a reliable low-temperature laboratory chest freezer capable of maintaining temperatures down to −60 °C. Despite its compact size, it delivers strong performance and temperature stability, making it ideal for laboratories, hospital departments, and research facilities where space-saving cold storage is essential. Product Features • Temperature range: −40 °C to −60 °C • Temperature uniformity: ±6.2 °C from the setpoint • Static cooling with single-compressor system • Environmentally friendly Nature R (R290) refrigerant • 80 mm thick polyurethane insulation with cyclopentane • Energy consumption: 3.707 kWh / 24 hours • XR30CX digital controller with temperature and probe failure alarms • Easy-to-clean painted steel interior • 1 steel basket with plastic coating • Lockable lid, mounted on castors for mobility • Ø12 mm porthole for external probe or monitoring connection • Ideal for the safe and stable low-temperature storage of laboratory samples, reagents, and pharmaceuticals	% Binder KBF PRO 1060 Constant climate chamber with expanded temperature / humidity range A powerful all-rounder among constant climate chambers: Equipped with all kinds of sophisticated technology, the KBF PRO takes any material test in its stride – whether it takes place at -20°C or under THB conditions at +85°C and 85% relative humidity. It offers flexible water supply options for all installation sites and consumes up to 40% less energy than its predecessor, the KMF model. Product features • Temperature range: -20°C to +100°C • Humidity range: 10% to 98% RH • Proven APT.line™ preheating chamber technology • Up to 40% lower energy consumption compared to the previous model • Energy-efficient cooling with modern inverter cooling unit • Cooling with climate-neutral R-290 refrigerant • Door heating to prevent condensation • Adjustable fan speed • Humidity regulation with capacitive humidity sensor and responsive steam humidification • Housing design with HIT technology • Stainless-steel inner chamber • Inner doors made of metal oxide-coated safety glass • Two racks with stainless-steel telescopic rails • Large access port with silicone plug • Floor-standing units featuring robust twin casters with brakes at the front • Stackable tabletop units with a volume of up to 130 liters • Intuitive touchscreen controller with time-segment and real-time programming • Ergonomically adjustable control terminal (for units with a volume of 470 liters and above) • Signal triangle with light-up status display (for units with a volume of 470 liters and above) • Internal data logger, measured values can be read out in open format via USB • Class 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarms • Unit self-test for comprehensive status analysis • Data interfaces: Ethernet, USB • BINDER Multi Management Software APT-COM™ basic edition • Optional light modules for ICH photostability testing (for models 260, 470, 720) • Optional LED light modules for plant growth (for models from 260)	% Heidolph Hei-SHAKE Reciprocating Core 2000 Platform Shaker The more powerful one with a 36 mm stroke and more space The shaker platform with a flat rubber mat 2000 included in the scope of delivery increases the platform capacity area by 71.5% compared to the Hei-SHAKE Reciprocating Core. With a stroke of 36 mm and a speed range of 1 – 300 rpm, proper separation of the samples is ensured. Your applications can be carried out in continuous operation or by means of a timer. The integrated timer function (1 min to 999 h 59 min) and RS 232 interface enable unsupervised operation, so that you can attend to other tasks without worry. The device activation and partly automated processes can be carried out remotely via the connection to the PC or via server-based software, e.g., Hei-PROCESS. In addition, the automatic restart, e.g., after power failures, can be set with the user-friendly menu structure. Scope of delivery: Shaker incl. flat rubber mat 1000 + set for upgrading to platform 2000 incl. flat rubber mat 2000.	% Heidolph Hei-SHAKE Rock Core 2000 (5°) Platform Shaker The bio-specialist for a gentle and efficient result on a larger surface The shaker platform with flat rubber mat 2000 included in the scope of delivery increases the plate area by 71.5% compared to the Hei-SHAKE Rock Core. Thanks to the 2D-rocking movement and a speed range of 1 – 80 rpm, more vigorous but continuously gentle shaking of the samples is ensured. Containers have a secure grip on the anti-slip rubber mat even at high speeds. Your applications can be carried out in continuous operation or by means of a timer. The integrated timer function (1 min to 999 h 59 min) and RS 232 interface enable unsupervised operation, so that you can attend to other tasks without a worry. The device activation and partly automated processes can be carried out remotely via the connection to the PC or via server-based software, e.g. Hei-PROCESS. In addition, the automatic restart, e.g. after power failures, can be set with the user-friendly menu structure. Two variants of this device are available: with a tilt angle of 10° to prevent foaming and 5° to prevent additional risks such as glass breakage and spill over of liquids. Scope of delivery: Shaker incl. flat rubber mat 1000 + set for upgrading to platform 2000 incl. flat rubber mat 2000
% Heidolph Hei-SHAKE Wave Core (10°) Platform Shaker The bio-specialist for continuous rinsing Thanks to the 3D-wave shaking movement and with a speed range of 1 – 80 rpm, continuous rinsing of the samples is ensured. Your applications can be carried out in continuous operation or by means of a timer. The integrated timer function (1 min to 999 h 59 min) and RS 232 interface enable unsupervised operation, so that you can attend to other tasks without a worry. The device activation and partly automated processes can be carried out remotely via the connection to the PC or via server-based software, e.g. Hei-PROCESS. In addition, the automatic restart, e.g. after power failures, can be set with the user-friendly menu structure. Scope of delivery: Shaker incl. flat rubber mat 1000 Two variants of this device are available: with a tilt angle of 10° to prevent foaming and 5° to prevent additional risks such as glass breakage and spill over of liquids.	% Nabertherm LE 1/11/R8 compact muffle furnace With their convincing price/performance ratio and the fast heat-up rates, these compact muffle furnaces are perfect for many applications in the laboratory. Quality features like the dual shell furnace housing of rust-free stainless steel, their compact, lightweight constructions, or the heating elements encased in quartz glass tubes make these models reliable partners for your application. Standard Equipment • Heating from two sides from heating elements protected in quartz glass tubes • Fast heating times • Maintenance-friendly replacement of heating elements and insulation • Housing coated in RAL 9003 • Solid state relays provide for lownoise operation • Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature • Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP) • Flap door which can also be used as a work platform • Exhaust air outlet in rear wall • Compact dimensions and light weight • Controller mounted under the door to save space • Controller R8 (adjustable for one temperature)	% Bimos LABSIT STOOL laboratory swievel chair Simple yet intelligent - Labsit is the clever all-round solution for sitting in the most innovative environment there is: the laboratory. Boasting a hygienic design, compact dimensions, ergonomic construction and user comfort, the Labsit masters all the challenges faced by the modern laboratory chair. The same, of course, applies for the flexible laboratory stool from the same collection. Product features • Skintec upholstery, black, soft, yet resistant and easy-to-clean surface • Footrest: black polyamide (optional: aluminum) • Suitable for cleanrooms in air purity class 3, acc. to EN ISO 14644-1 • GMP compatible • 10 year guarantee Other configurations available	% Esco AC2-6E8 G4 Airstream® G4 Class II biological safety cabinet Introducing Airstream® (E-series) G4 Class II Biosafety Cabinet. The new BSC with Centurion Touchscreen controller is EN12469-certified with standby height that easily activates standby mode, an ergonomic work zone that is comprised of bright illumination using industry-leading dimmable LED combined with raised, durable, stainless-steel armrest. It also comes with wider model options offering stainless steel (S-series) and glass (E-series) side wall variants. The Airstream® (E-series) G4 incorporates greener features, ensuring a more sustainable and environmentally friendly operation. With its compact size and advanced features, this biosafety cabinet offers an unparalleled level of convenience and safety, making it the ideal choice for laboratories and research facilities. Features Centurion Touchscreen Controller • Intuitive, comprehensive, and easy-to-understand • Virtually comprehensible safety information and cabinet alarms via 3D BSC diagram • Defined details of alarm types with clear instructions for proper intervention • Centered and angled down for easy reach & viewing • Selectable Quickstart mode for fast operation Dimmable LED • Adjustable work zone brightness • Ideal light intensity of 1000 lux • Saves energy and optimizes work comfort Working Area (E series) • Multi-piece work tray is designed to accommodate autoclavable sizes, catering to user needs for sterilization and handling. Ergonomic Armrest • Full length arm rest for user comfort Ergonomic Sash • Frameless, shatterproof, and UV-absorbing tempered glass • Designed with a 10° angle to enhance user comfort during operation. USB Port and Remote Modbus • USB port to access cabinet data log and BMS connectivity • Newly integrated Remote Modbus feature for users to securely access the cabinet remotely from external devices. Cabinet Construction (E series) • UV absorbing tempered glass with side capture zones and negative pressure to optimize containment efficiency Green Product • Equipped with energy-efficient DC ECM that allows up to 70% energy savings vs AC motor • Standby mode to reduced power consumption Advanced Filtration System • Creates ISO Class 3 work zone instead of industry-standard, ISO Class 5 • Long filter life for lower operating cost, up to 10 years • 99.999% at 0.1 to 0.3 micron, ULPA as per IEST-RP-CC001.3 USA 99.999% at MPPS, H14 as per EN 1822 EU Isocide™ Antimicrobial Powder Coating • Eliminates 99.9% of surface bacteria within 24 hours of exposure