All products

Compact and reliable multifunction centrifuge for general laboratory use

The Frontier 5706P is a benchtop, low-speed multifunction centrifuge that provides an ideal solution for general laboratory and life science applications. The unit is supplied with the R-A12×15/6M fixed-angle rotor, which ensures reliable performance during routine separation tasks. Its compact design requires minimal bench space while delivering stable and safe operation for everyday laboratory work.

Areas of application
• General laboratory applications
• Life science research
• Routine separation tasks

Key features
• Double-line LCD display with light blue backlight
• Intuitive touch-wheel control, easy to operate even when wearing gloves
• Simultaneous display of set and actual parameters
• Speed setting and display in RPM and RCF
• One-button switching between RPM/RCF and acceleration or deceleration
• 10 acceleration and 10 deceleration levels
• 99 program memory slots for storing frequently used settings
• Quick Spin function for short centrifugation runs

Rotor and tube types
• The unit is supplied with the R-A12×15/6M fixed-angle rotor
• Capacity: 12 × 15 ml centrifuge tubes
• Compatible with round-bottom and conical-bottom tubes
• Rotor item number: 30130877

Technical performance
• Maximum speed: 6,000 rpm
• Maximum relative centrifugal force: 4,427 × g

Safe operation
• Mechanical lid locking system
• Rotor imbalance detection with automatic shutdown
• Microprocessor-controlled operation for enhanced safety
• LED status indicators for standby, operation and run completion
• Audible signal at the end of the run

Noise level
• Depending on the rotor: ≤ 56 ± 2 dB(A)

Compact and reliable multifunction centrifuge for general laboratory use

The Frontier 5706P is a benchtop, low-speed multifunction centrifuge that provides an ideal solution for general laboratory and life science applications. Thanks to its space-saving design and wide range of rotors and adapters, it is suitable for handling various tube types and volumes.

Areas of application
• General laboratory applications
• Life science research
• Routine separation tasks

Key features
• Double-line LCD display with light blue backlight
• Intuitive touch-wheel control, easy to operate even while wearing gloves
• Simultaneous display of set and actual parameters
• Speed setting and display in RPM and RCF
• One-button switching between RPM/RCF and acceleration or deceleration
• 10 acceleration and 10 deceleration levels
• 99 program memory slots for frequently used settings
• Quick Spin function for short centrifugation runs

Rotors and tube types
• Wide range of rotors and adapters
• Compatible with centrifuge tubes from 0.2 ml to 50 ml
• Suitable for round-bottom and conical-bottom tubes
• Fixed-angle and swing-out rotors available

Maximum capacity
• 6 × 50 ml with fixed-angle rotor

Safe operation
• Mechanical lid locking system
• Rotor imbalance detection with automatic shutdown
• Microprocessor-controlled operation for enhanced safety
• LED status indicators for standby, operation and run completion
• Audible signal at the end of the run

Noise level
• Depending on the rotor: ≤ 56 ± 2 dB(A)

A flexible holder allows shaking separating funnels with a volume of 50 to 500 ml optimally. The single separating funnel holder is delivered in a pre-assembled way and you do not need tools for mounting it on a perforated platform with universal perforation being placed on the shaker’s platform.

Tested with a 500 ml separating funnel, you can place a maximum of three separating funnels next to each other on the perforated platform 1000 and a maximum of four on the perforated platform 2000. Moreover, we want to highlight in particular the optimized angle for ventilation during the shaking process.

Suitable for platform shakers with orbital and reciprocating shaking movement - Unimax 1010/2010 and Promax 1020/2020

Main components of the system:
• MD 4C VARIO chemical diaphragm vacuum pump (4 heads, 3 stages)
• VACUU·SELECT vacuum controller with graphical user interface and predefined applications
• Glass inlet separator with robust protective coating (against solid particles and droplets)
• Peltronic emission condenser for efficient solvent recovery (without cooling water)

Features:
• Automatic boiling point detection for faster and more stable evaporation processes
• Hysteresis-free, fine control with the VARIO algorithm
• High pumping speed and deep ultimate vacuum, suitable even for high-boiling solvents
• Quiet operation, low energy consumption, long diaphragm lifetime

The Vestfrost ULTF-C74i is a compact yet high-performance ultra-low temperature chest freezer, specifically designed for laboratory, pharmaceutical, and biotechnology applications. With an operating range between -20 °C and -86 °C, it offers an ideal solution for the safe long-term storage of sensitive samples, vaccines, cells, and biological materials.

The chest-style design is an economical choice, as the horizontally opening lid minimizes cold air loss, thereby improving thermal retention and reducing energy consumption. With a net capacity of 71 liters, it is perfectly suited for storing smaller sample volumes, even directly at the workstation.

Key features

• Temperature range: -20 °C to -86 °C
• Net volume: 71 liters
• Static cooling for excellent temperature stability
• i-Care controller – multilingual touchscreen interface with USB data logging
• Energy-efficient operation: approx. 5.3 kWh / 24h
• Acoustic and visual alarms: for temperature fluctuations and sensor failure
• Suitable for storing 2 ml sample vials (up to 4,000 samples) and 2” cryoboxes (up to 40 boxes)

Double system, volume-controlled, for softening drinking water that is free of iron and manganese, in accordance with the Drinking Water Ordinance, fully automatic 5-stage central control valve type Fleck 9100 SXT with intelligent control electronics made of gunmetal/plastic with an adapter for the second pressure vessel. 2 pressure tanks made of corrosion-resistant GRP, including a high-quality cation exchanger. 1 brine tank with a sieve floor and float valve (safety valve).

Technical data

• Operating pressure: 3 to 6 bar
• Max. water temperature: 40°C
• Max. ambient temperature: 5 to 40°C
• E lectrical connection: 230 V 50 Hz
• Dimensions of housing: approx. W 350 x D 460 x H 1180 mm
• Water connection: R 1’

Striking the ideal balance between inventive features and functional, uncomplicated weighing capabilities, the OHAUS Adventurer incorporates all of the applications necessary for routine weighing and measurement activities. With a color touchscreen, three-level user management to fulfill GLP/GMP compliance capabilities, two USB ports, and much more, Adventurer is the most complete balance in its class.

Overview:
• Applications: Weighing, Parts Counting, Percent Weighing, Check Weighing, Dynamic Weighing, Formulation, Density Determination, Totalization, Display Hold, Batch Printing
• Display: 4.3" (109 mm) Full-color VGA graphic touchscreen with user-controlled brightness
• Operation: AC adapter (included)
• Communication: RS232, USB Host, USB Device (included). GLP/GMP data output with real-time clock.
• Construction: Metal base, ABS top housing, stainless steel pan, glass draftshield with 2-piece top mounted side doors & sliding top door (1mg models only), illuminated up-front level indicator, weigh below hook, security bracket, calibration lock, full housing in-use cover
• Design Features: Selectable environmental filters, auto tare, user selectable span calibration points, software lockout and reset menu, user selectable communication settings and data print options, user definable project and user IDs, up to 9 operating languages

Striking the ideal balance between inventive features and functional, uncomplicated weighing capabilities, the OHAUS Adventurer incorporates all of the applications necessary for routine weighing and measurement activities. With a color touchscreen, three-level user management to fulfill GLP/GMP compliance capabilities, two USB ports, and much more, Adventurer is the most complete balance in its class.

Overview
• Applications: Weighing, Parts Counting, Percent Weighing, Check Weighing, Dynamic Weighing, Formulation, Density Determination, Totalization, Display Hold, Batch Printing
• Display: 4.3" (109 mm) Full-color VGA graphic touchscreen with user-controlled brightness
• Operation: AC adapter (included)
• Communication: RS232, USB Host, USB Device (included). GLP/GMP data output with real-time clock.
• Construction: Metal base, ABS top housing, stainless steel pan, glass draftshield with 2-piece top mounted side doors & sliding top door (1mg models only), illuminated up-front level indicator, weigh below hook, security bracket, calibration lock, full housing in-use cover
• Design Features: Selectable environmental filters, auto tare, user selectable span calibration points, software lockout and reset menu, user selectable communication settings and data print options, user definable project and user IDs, up to 9 operating languages

Striking the ideal balance between inventive features and functional, uncomplicated weighing capabilities, the OHAUS Adventurer incorporates all of the applications necessary for routine weighing and measurement activities. With a color touchscreen, three-level user management to fulfill GLP/GMP compliance capabilities, two USB ports, and much more, Adventurer is the most complete balance in its class.

Overview
• Applications: Weighing, Parts Counting, Percent Weighing, Check Weighing, Dynamic Weighing, Formulation, Density Determination, Totalization, Display Hold, Batch Printing
• Display: 4.3" (109 mm) Full-color VGA graphic touchscreen with user-controlled brightness
• Operation: AC adapter (included)
• Communication: RS232, USB Host, USB Device (included). GLP/GMP data output with real-time clock.
• Construction: Metal base, ABS top housing, stainless steel pan, glass draftshield with 2-piece top mounted side doors & sliding top door (1mg models only), illuminated up-front level indicator, weigh below hook, security bracket, calibration lock, full housing in-use cover
• Design Features: Selectable environmental filters, auto tare, user selectable span calibration points, software lockout and reset menu, user selectable communication settings and data print options, user definable project and user IDs, up to 9 operating languages

• Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C
• Receiver cassettes protect against threat of glassware breakage
• Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom
• Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories
• Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ)
• Large touch screen control panel with illuminated displays for all process parameters, programmable ramps

Features identical specifications as the Hei-VAP Industrial, but for limited budgets and comes without these safety aspects:
• Metal frame and safety glass guard hood covering the bath
• High-impact PMMA door covering the glassware assembly
• High-impact PMMA latching doors which cover the receiving flask cassettes

Programs for your process control
• SETpressure
Program for solvent separations
o This program holds a set vacuum constant and uses a hysteresis
o Optionally, the process can be predefined via programmable ramps
• AUTOaccurate
Supports very precise automatic pressure control for solvent evaporation and separations.
o This program identifies multiple boiling points automatically by reducing vacuum.

Technical Data
• Lift: motor lift
• Rotation speed range: 6 – 160 rpm
• Temp. range heating bath: 20 – 180 °C
• Bath temperature setting: digital
• Temperature accuracy: ±1 °C
• Heating capacity: 4,000 W
• Overheat cut-off protection: yes
• Display: 7" Touchpanel
• Integrated vacuum controller: yes
• Timer: yes
• Vacuum program SETpressure: yes
• Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes
• Supply Power: 4,600 W
• Protection class DIN EN 60529: IP 20
• Max. condensing surface: 1.2 m²

Glassware A1C - Achieving very high rates of distillation - especially during automated processes
Glassware for very high rates of distillation. Also suitable for liquids with a boiling point up to 120 °C. Recommended for continuous evaporation in combination with the automatic module Hei-VOLUME Distimatic Pro.
Includes:
• A double condenser in series (for descending and ascending condensation) – condensation
surface of 1.2 m²
• An expansion vessel
• An evaporation flask of 20 liters
• two receiving flasks of 10 liters

Picture similar
• Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C
• Receiver cassettes protect against threat of glassware breakage
• Comes as standard with integrated refill water system, spillover prevention and a release valve at the bottom
• Optional Base Cart is fully-maneuverable with removable panels for storage of vacuum pump, glassware, solvents or accessories
• Certification according to GMP available for this model: validation for installation (IQ) and operating qualification (OQ)
• Large touch screen control panel with illuminated displays for all process parameters, programmable ramps
Features identical specifications as the Hei-VAP Industrial, but for limited budgets and comes without these safety aspects:
• Metal frame and safety glass guard hood covering the bath
• High-impact PMMA door covering the glassware assembly
• High-impact PMMA latching doors which cover the receiving flask cassettes
Programs for your process control
• SETpressure
Program for solvent separations
o This program holds a set vacuum constant and uses a hysteresis
o Optionally, the process can be predefined via programmable ramps
• AUTOaccurate
Supports very precise automatic pressure control for solvent evaporation and separations.
o This program identifies multiple boiling points automatically by reducing vacuum.
Technical Data
• Lift: motor lift
• Rotation speed range: 6 – 160 rpm
• Temp. range heating bath: 20 – 180 °C
• Bath temperature setting: digital
• Temperature accuracy: ±1 °C
• Heating capacity: 4,000 W
• Overheat cut-off protection: yes
• Display: 7" Touchpanel
• Integrated vacuum controller: yes
• Timer: yes
• Vacuum program SETpressure: yes
• Vacuum program AUTOaccurate requires AUTOaccurate sensor: yes
• Supply Power: 4,600 W
• Protection class DIN EN 60529: IP 20
• Max. condensing surface: 1.2 m²

Glassware A1
• Glassware for very high rates of distillation. Also suitable for liquids with a boiling point up to 120 °C. Recommended for continuous evaporation in combination with the automatic module Hei-VOLUME Distimatic Pro.
Includes:
• A double condenser in series (for descending and ascending condensation) – condensation
surface of 1.2 m²
• An expansion vessel
• An evaporation flask of 20 liters
• A receiving flask of 10 liters

Evaporating flasks come with a standard NS 29/32 joint size and are also available with NS 24/29 ground joints.

A special F-size universal tray (800x420mm) is now available to shake large Erlenmeyer flasks. It is ideal for cell culture.
This tray allows parallel shaking of 7 x 3L Corning Fernbach culture flasks or 7 x 5L Thomson Optimum Growth flasks at a maximum orbital diameter of 50mm. The FUM-V has no handles and a V support underneath the tray raises it above the clamping mechanism creating more space for flasks.
Clamps must be ordered separately. (Order number: 101425)

For Ranger 7000, there is one resounding theme: it offers the best of every ingenious feature that make OHAUS industrial products the right tools for your toughest weighing jobs. Ranger 7000 boasts the highest resolution, largest display, most application modes and connectivity options, as well as the largest memory library of any industrial bench scale in the OHAUS portfolio.
• Applications
Weighing, Parts Counting with Auto Optimization, Percent Weighing, Advanced Checkweighing, Animal/Dynamic Weighing, Display Hold, Filling, Formulation, Differential Weighing, Density Determination, Sieve Analysis
• Display
4.3" (109 mm) Full-color WQVGA graphic display with user-controlled brightness
• Operation
AC power (included) or rechargeable battery (accessory sold separately)
• Communication
Easy access communication port including standard USB and RS232 (included) and an optional third port of RS232 or Ethernet (accessories sold separately). GLP/GMP Data Output with Real Time Clock. Data Transfer Function.
• Construction
Modular design, die-cast housing, removable stainless steel platform, integral weigh below hook, menu lock switch, level indicator
• Design Features
Checkweighing lights with selectable operation and audible signal settings, several selectable operating languages, selectable environmental and autoprint settings, stability indicator, overload/underload indicators, selectable brightness settings, auto-dim, auto-sleep, auto tare, chain tare

With a compact design, this undercounter fits perfectly beneath your work bench, providing a storage solution that is ideal for places where space is limited.

Featuring the ETR-System™ (Extended Temperature Range) the unit can operate within -20°C to -86°C, giving you flexibility to adjust the cooling to your specific needs, or to save energy reducing both operation costs & carbon emission. The Vestfrost biomedical appliances offer a reliable solution for users seeking industry leading cooling performance and high operation stability.

Product features

• Temperature range: -20 to -86 °C
• Uniformity in performance: 1,7 / -2,6 °C
• Pull down time (from test condition to fabric setpoint): 168 Minutes
• Hold over time (from fabric SP to critical point): 102 Minutes
• Number of compressors: 1
• Material inner cabinet: Stainless steel
• Material outer cabinet: Painted steel
• Insulation type: Polyurethane with cyclopentane
• Lock
• LED light
• Battery backup
• Porthole size: 15 mm
• Dry contact
• Vacuum valve
• Alarms: High / Low temperature, Open door, Power failure, Probe failure
• Noise: 57 dB
• Refrigerant/amount: Nature R / 109g Type & gram
• Internal air distribution (Type) Static
• USB Connection
• Data connection: MODBUS
• Controller abilities: Logging of data & alarms
• Controller languages: Digits
• Log numbers: 35000

Powder flasks come with a standard NS 29/32 joint size are also available with NS 24/29 ground joints.

When it comes to laboratory equipment, Waldner stands for an unbeatable combination of safety, flexibility, and durability.

Waldner laboratory systems are designed as modular complete solutions that can be adapted to new research processes and changing requirements at any time. The company guarantees the highest quality and chemical resistance of the materials used.

Through the seamless integration of laboratory furniture, media supply systems, and building technology, Waldner creates not only ergonomic workplaces, but also working environments that ensure maximum safety and compliance with the highest standards.

In Hungary, Labokraft Kft. has been the exclusive distributor of Waldner since 2006, supporting the research, industrial, and healthcare sectors with complex laboratory solutions.

Future-proof and versatile laboratory solutions from a single source.

Our productportfolio

• Laboratory Workbench for Every Specific Need

A lab bench is essential to every laboratory, shaping ergonomics, versatility, and aesthetics more than any other piece of lab furniture. Laboratory benches play a crucial role in workflows and processes, making high quality and perfect configuration according to specific needs of each lab a must.

We manufacture laboratory workbenches known for their exceptional stability, intelligent design, and versatile applications. With a wide range of bench frames and worktops, Waldner meets all laboratory workstation requirements—from easy floor cleaning to ergonomic seating. Additionally, Waldner ensures a systematic separation of service supply and furniture for maximum flexibility.

• Waldner Laboratory Cabinets – Secure Storage Space in the Lab

You need storage space in laboratories to store equipment, samples, and chemicals. Special lab cabinets are ideal for this purpose, as they are designed to meet the specific demands of lab environments. They enhance safety, support organization in daily laboratory routines, and are built to withstand exposure to hazardous materials.

But no two lab storage cabinets are the same: storage needs vary widely across labs, which is why we offer a broad range of cabinet lab solutions tailored to individual requirements. Whether you're looking for underbench cabinets, a top-mounted cabinet, a mobile storage unit, or a safety cabinet, our extensive product range guarantees you'll find the ideal model for your laboratory.

• Waldner Laboratory Sink for Hygienic Work in the Lab

Laboratory sinks are essential equipment in most laboratories, ensuring hygienic working conditions and supporting various processes. Easy access to water is crucial for maintaining efficient workflows in daily operations. That’s why Waldner offers a range of laboratory sink designs tailored to meet your specific needs.

Our versatile product range includes generously sized sinks, drip cups, sink modules, and mobile laboratory sinks. Made from durable materials such as stoneware, polypropylene (PP), and stainless steel, Waldner laboratory sinks are built to last. Various installation options are available to suit your laboratory setup.

If you are looking for modern, reliable, and flexibly adaptable laboratory furniture for long-term use, feel free to contact us. Our expert colleagues provide detailed needs assessment and professional consultation to ensure the solutions best suited to your laboratory environment.

With the smallest footprint, these units are perfect for storing biomedical content in a room with limited space.
The units can be placed on a table for easy access in your work environment. The units can operate within -20 to -86 giving you flexibility to adjust the cooling to your specific needs.

Product features
• Can be placed on a table
• Temperature range: -20 to -86 °C
• Number of compressors: 1
• Weight netto: 63 kg
• Material inner cabinet: Stainless steel
• Material outer cabinet: Painted steel
• Insulation type: Polyurethane with cyclopentane
• Lock
• Battery backup
• Porthole size: 20 mm
• Dry contact
• Vacuum valve
• Alarms: High / Low temperature, Open door, Power failure, Probe failure
• Noise: < 48 dB
• Refrigerant/amount: Nature R 2/109gr
• Internal air distribution: Static
• USB Connection
• Controller: i-CARE touch, Logging of data & alarms

Thanks to thermoelectric cooling technology with patented heat dissipation, the new KBF-S ECO climatic chamber is one of the most energy-efficient constant climate chambers on the market. The thermoelectric cooling technology means the KBF-S ECO series is also very quiet during operation.
Benefits
• Safe thanks to standard-compliant testing according to the ICH Q1A guideline, even with full load.
• Reliable thanks to failsafe operation without compromise.
• Smart, as a wide range of accessories makes it highly compatible for adaptation to specific customer requirements.
• Economical, as energy consumption is minimal thanks to optimized thermoelectric cooling.
Main features
• Temperature range: 0 °C to +70 °C (max. 24 °C under ambient temperature)
• Unit self-test for comprehensive status analysis
• Inner chamber made completely of stainless steel
• Humidity range: 10% to 80% RH
• APT.line™ preheating chamber technology
• Independent water supply via tank
• LCD to display temperature and humidity along with additional information and alarms
• Internal data logger, measured values can be read out in open format via USB

Simple yet intelligent - Labsit is the clever all-round solution for sitting in the most innovative environment there is: the laboratory. Boasting a hygienic design, compact dimensions, ergonomic construction and user comfort, the Labsit masters all the challenges faced by the modern laboratory chair. The same, of course, applies for the flexible laboratory stool from the same collection.

Product features

• Strong, plastic seat shell, available in differet colors: blue, anthracite, orange, green, white
• Skintec upholstery, black, soft, yet resistant and easy-to-clean surface
• Footrest: black polyamide (optional: aluminum)
• Handle on the backrest
• Backrest with 3D-flex function
• Suitable for cleanrooms in air purity class 3, acc. to EN ISO 14644-1
• GMP compatible
• 10 year guarantee – including on gas pressure springs

Other configurations available