All products

A special F-size universal tray (800x420mm) is now available to shake large Erlenmeyer flasks. It is ideal for cell culture.
This tray allows parallel shaking of 7 x 3L Corning Fernbach culture flasks or 7 x 5L Thomson Optimum Growth flasks at a maximum orbital diameter of 50mm. The FUM-V has no handles and a V support underneath the tray raises it above the clamping mechanism creating more space for flasks.
Clamps must be ordered separately. (Order number: 101425)

Shaking unit SS-X SMX1910
• Tray, size: F (800x420mm)
• Loading, maximum: 25kg
• Shaking motion: speed
* orbital, Ø 12.5mm 20...500 rpm
* orbital, Ø 25.0mm 20...400 rpm
* orbital, Ø 50.0mm 20...300 rpm
* can be changed
• Setting, digital: 1 rpm
• Accuracy, absolute: ± 0.5 rpm
• Timer: 1s ... 999h
• Acceleration: controlled
• Active brake: adjustable
• Stop on position: adjustable

Are you screening using large numbers of 50ml bioreactors (TPP, Falcon tubes etc.)? Then our new EPFL-table is the ideal solution. This table accepts tube holders, each with a capacity of 24 x 50ml tubes. Each tube holder has its own clamp handle allowing it to be easily taken out of the incubator shaker and put on a clean bench while the other tubes keep on shaking. It’s also possible to shake microtiter plates on the EPFL-table, using Duetz 4-place coverclamps. If you have a Kuhner F-size tray (800 x 420mm), you can also clamp that on the table instead of individual holders.

• Test tube holder RGH-16 (24 tubes)
• For test tubes with 16 - 17 mm diameter (15ml TPP/falcon)

Tray for Microtiter plates E-MT.22 For 2x12 Microtiterplates or 1x12 Deepwell platesTray size E (420x420mm)

Universal tray EU compl. 420x420 mm with shaped M4 threads for mixed loading with clamps for different Erlenmeyer flasks or test tube holders

Tray with fixed clamps E-25 To load 81 Erlenmayer flasks with a volume of 25 ml

Kuhner Kelvin+ can be placed on, or under, any table or lab bench. The incubator has a flat front and a space-saving door mechanism. The large window provides a good view of cultivation vessels. For static experiments, a fixed shelf may be placed above the shaking tray inside the chamber. The 40 mm feedthrough port provides enough space for tubing and cables needed for the cultivation process. An exterior side-mounted document holder adds convenience to the Kuhner Kelvin+.
The stainless-steel chamber of the Kuhner Kelvin+ is easily cleaned.
Technical data Kuhner Kelvin+
• Temperature distribution: +/- 0.5°C (at 37°C, 100 rpm)
• Principle of sensor: Pt-100
• Air circulation: 190 m3/h
• Illumination: LED
• Ambient temperature: 10 up to 35°C
• Operating menu in: DE, FR, EN, IT, ES
• Interface standard: CAN-Bus
• Tray, size: E (420 x 420mm)
• Control accuracy, absolute: <+/- 0.3°C
• Material: inner chamber stainless steel, outer chamber PUR (insulation), door polycarbonate

A compact sized shaker-incubator with an excellent temperature distribution
The Lab-Shaker LS-Z and the incubator Kuhner Kelvin+ combine approved Kuhner quality in a new modular system to provide maximum flexibility to our customers. The LS-Z, just like its predecessor LS-X, is a sturdy benchtop shaker designed for continuous and maintenance-free ope­ration. Our new Kuhner Kelvin+ is a compact sized incubator with an excellent temperature distribution.
Performance characteristics
• Compact footprint
• Hygienic design: easy cleaning
• Fast regeneration time due to stainless steel chamber
• Very good temperature distribution
• Large feedthrough port
• Kuhner TOM online measurement tool upgradable
Technical data - Lab-Shaker LS-Z
• Power consumption typical: approx. 25W
• Weight shaker: 46 kg
• Weight Power Cube: 6.5 kg
• Weight Controller: 0.6 kg
• Ambient temperature: -20 up to 80°C
• Ambient relative humitidy: up to 90 % (shaking unit)
• Operating menu in: DE, FR, EN, IT, ES
• Interface standard: CAN-Bus
• Tray, size
E (420 x 420mm)
EX (500 x 420mm)
F (800 x 420mm)
• Loading maximum: up to 25 kg
• Setting, digital: 1 rpm
• Control accuracy, absolute: +/- 0.5 rpm
• Timer: 1 s – 999 h
• Acceleration: controlled
• Active break: adjustable
• Stop on position: adjustable
• Shaking motion
orbital, Ø 12.5 mm* 20...500 rpm
orbital, Ø 25.0 mm* 20...400 rpm
orbital, Ø 50.0 mm* 20...300 rpm
• Material: Stainless steel cover
Options & Accessories
Interface, optional: USB, Ethernet, digital, analogue
IQ/OQ-Documentation: available
Dual table: available
Technical data Kuhner Kelvin+
• Temperature minimum: ambient + 3°C
• Temperature maximum: 60°C
• Temperature distribution: +/- 0.5°C (at 37°C, 100 rpm)
• Principle of sensor: Pt-100
• Power of heating: 400W
• Air circulation: 190 m3/h
• Power consumption typical: approx. 130W
• Gas volume: 130 L
• Weight shaker: 28 kg
• Illumination: LED
• Ambient temperature: 10 up to 35°C
• Operating menu in: DE, FR, EN, IT, ES
• Interface standard: CAN-Bus
• Tray, size: E (420 x 420mm)
• Setting, digital: 0.1°C
• Control accuracy, absolute: <+/- 0.3°C
• Timer: 1 s – 999 h (shaker only)
• Material: inner chamber stainless steel, outer chamber PUR (insulation), door polycarbonate
Options & Accessories
• Light shading plate
• Shelf
• Interface, optional
• Stacking adapter
• IQ/OQ-Documentation
• Dual table

ISF1-Z incubator shaker - the perfect solution for shaken cultivation processes
The ISF1-Z incubator shaker is suitable for applications in laboratories, research centers and production facilities. The ISF1-Z complies with GMP (good manufacturing practice) requirements and regulations. It offers a large shaking capacity with a small footprint and many features allowing straightforward, safe handling of any culture or product. The incubator shaker is applicable for microbial, plant, human and animal cell cultures.
Performance characteristics of ISF1-Z models
• Large shaking capacity with small footprint
• Hygienic design according to DIN EN ISO 14159
• Improved direct drive: stronger, higher shaking frequencies, very long lasting
• Up to three machines can be stacked without additional components: incubators ISF1-X/W and new ISF1-Z mixable in stack
• Flexible and retrofittable: all options and accessories applicable
• Fast, direct information through parallel and clear display of all process parameters
ISF1-Z Models
• The ISF1-Z incubator shaker is available in three different models: ISF1-Z, ISF1-Z EcoDew and ISF1-Z Peltier. Each model provides distinct features and is additionally available with CO2 control for cell culture processes.
• The ISF1-Z is the basic version of Kuhners stackable incubator shaker with temperature control (heating).
100% stainless steel for easy cleaning
• The ISF1-Z is available in a 100% stainless steel finish. It can either be painted white or have a processed stainless steel look. Take a look at the video to see the advantages of having stainless steel inside and outside the shaker.
Quality
• The improved maintenance-free direct drive of the ISF1-Z is stronger, offers higher shaking frequencies and has a longer lifespan than ever. It guarantees accurate control and low energy consumption/heat dissipation even at high speeds. Kuhner’s direct drive system and the newly designed shaking table allows the shaking diameter to be changed at any time – quickly and easily. Different fixed shaking diameters (3, 6, 9, 12.5, 19, 25, 50, 70 mm) are adjustable. And even a stepless adjustment is available as an option.
• All ISF1-Z components are designed for durability and reliability. A Kuhner shaker is a cost effective investment in quality backed with a five year warranty.
Hygienic design
• The ISF1-Z is made of stainless steel inside and outside for easy and fast cleaning. The hygienic design complies with GMP requirements. The interior was designed according to DIN EN ISO 14159. It has rounded corners and a drain at the back for quick removal of any unwanted liquids. The direct drive system is completely covered and therefore protected from spills. The incubator chamber can be cleaned with chemicals or sterilized using optional UV lighting.
A system that grows with your needs
• Up to three ISF1-Z incubators can be stacked providing more shaking capacity without taking up more floor space in the lab. Stacking is a simple procedure without the need for special tools or stacking kits. Each machine operates independently. The ISF1-Z incubator shakers are mixable in stack with ISF1-X/W incubators.
Options, accessories, and more
• Numerous options and accessories are available for the ISF1-Z incubator shaker to fulfill any need of our customers regarding cultivations in shaken bioreactors. Moreover, all accessories are interchangeable between the new ISF1-Z incubators and its predecessors ISF1-X/W. The ISF1-Z offers even more interior space than its predecessor ISF1-X, e.g. to accommodate particularly big shake flasks. The ISF1-Z has clearly arranged displays on the front side (e.g. for shaking speed) with color change and an acoustic signal when an error/alarm occurs.
• Additionally, a fix or a tilting touchscreen version with our Kuhner Insight software is available. Serial interfaces (e.g. CAN) are arranged on the front side and the sensors in the inside are also easily accessible for a fast and comfortable work flow. The interior LED light is a color neutral light with low energy dissipation.
Detailed technical data can be found in the product catalog.

Space saving stackable incubator shaker
The Kuhner LT-X (Lab-Therm) incubator shaker has the same capabilities as the larger ISF1-X and ISF4-X models. The incubator shaker was specially developed to address the shaking needs of the biotechnology and pharmaceutical industries. The practical size of the LT-X means it will fit in any laboratory.
Performance characteristics
• Fits into any laboratory
• Used in biotech and pharmaceutical industries
• Accepts flasks up to 6 litres
• Two units can be stacked without the need for special kits or tools
• Humidity, CO2 and O2 control available
• Extra space
Exceptional chamber height means flasks up to 6 litres capacity can be accommodated. If using smaller flasks, there is sufficient head height to fit one or two stationary trays above the shaking table. It is also possible to stack two LT-X together without the need for special kits or tools.
• Functionality through direct drive
The maintenance-free direct drive guarantees long and economical performance from the LT-X. The shaking diameter can be changed at any time thanks to Kuhner’s unique direct drive system. The integrated drive is protected from spills and the all stainless steel interior has a drain at the back for any unwanted liquids. The chamber can be cleaned using chemicals or sterilized with optional UV lighting.
• Safety and quality
A door switch ensures the motor stops as soon as the door is opened. After closing the door properly, the motor restarts. The safety, reliability and quality of our shakers are of personal concern to everyone at Kuhner which is why all our machines are supplied with a 5 year warranty.
• Configuration
The LT-X can be equipped with options for CO2, O2,controlled humidity, LED photosynthesis, UV lighting and much more. It is now also possible to integrate measuring data from Kuhner shakers with your company’s own network using Kuhner Insight software together with the NET-60 interface.
Detailed technical data can be found in the product catalog.

Large incubator shaker with a minimal footprint and up to five independent shaker units
The Kuhner ISF4-X incubator shaker offers large shaking capacity with temperature, humidity and CO2 control all available. The shaker cabinet can incorporate four or even five independent shaking units which are height adjustable. The shaking diameter and speed of each unit can be individually selected. Standard diameters are 12.5, 25 and 50 mm. Other shaking diameters are possible.
Performance characteristics
• All stainless steel interior
• Large shaking capacity
• Easy access to contents
• Each shaking unit has its own direct drive
• Door heating, with controlled humidity
• Guaranteed quality
When designing the ISF4-X special emphasis was placed on reliability and durability. The high quality of Kuhner shaking machines is backed with a five year warranty.
• Safety and convenience
The large door opening of the ISF4-X allows easy access to the shake flasks inside. The doors are fitted with a safety switch to ensure shaking stops when the doors are opened.
The large windows allow a clear view of incubator’s contents. The entire ISF4-X chamber is made of stainless steel making sterilisation with chemicals possible.
• Energy saving operation
The highly efficient direct drive system means economic low power consumption and the cooling system also operates with energy efficiency.
• Electrical protection
Automatic supervision of the mains voltage protects the shaker and in the event of a voltage spike the unit disconnects from the mains. The machine resumes operation at the set values once power is restored.

ISF1-Z incubator shaker - the perfect solution for shaken cultivation processes
The ISF1-Z incubator shaker is suitable for applications in laboratories, research centers and production facilities. The ISF1-Z complies with GMP (good manufacturing practice) requirements and regulations. It offers a large shaking capacity with a small footprint and many features allowing straightforward, safe handling of any culture or product. The incubator shaker is applicable for microbial, plant, human and animal cell cultures.
Performance characteristics of ISF1-Z models
• Large shaking capacity with small footprint
• Hygienic design according to DIN EN ISO 14159
• Improved direct drive: stronger, higher shaking frequencies, very long lasting
• Up to three machines can be stacked without additional components: incubators ISF1-X/W and new ISF1-Z mixable in stack
• Flexible and retrofittable: all options and accessories applicable
Includes all features of the basic model plus:
• Uses long-lasting Peltier elements for precise heating, cooling and humidity control
• Eco-friendly concept: no coolants or compressors required
• Humidity control with vast control range of 50 - 85%
• Humidifying and dehumidifying possible
Detailed technical data can be found in the product catalog.

ISF1-Z incubator shaker - the perfect solution for shaken cultivation processes. The incubator shaker is applicable for microbial, plant, human and animal cell cultures.
• Hygienic design according to DIN EN ISO 14159
• Improved direct drive: stronger, higher shaking frequencies, very long lasting
Includes all features of the basic model plus:
• Uses long-lasting Peltier elements for precise heating, cooling and humidity control
• Eco-friendly concept: no coolants or compressors requires

Space saving stackable incubator shaker
The Kuhner LT-X (Lab-Therm) incubator shaker has the same capabilities as the larger ISF1-X and ISF4-X models. The incubator shaker was specially developed to address the shaking needs of the biotechnology and pharmaceutical industries. The practical size of the LT-X means it will fit in any laboratory.
Performance characteristics
• Fits into any laboratory
• Used in biotech and pharmaceutical industries
• Accepts flasks up to 6 litres
• Two units can be stacked without the need for special kits or tools
• Humidity, CO2 and O2 control available
• Extra space
Exceptional chamber height means flasks up to 6 litres capacity can be accommodated. If using smaller flasks, there is sufficient head height to fit one or two stationary trays above the shaking table. It is also possible to stack two LT-X together without the need for special kits or tools.
• Functionality through direct drive
The maintenance-free direct drive guarantees long and economical performance from the LT-X. The shaking diameter can be changed at any time thanks to Kuhner’s unique direct drive system. The integrated drive is protected from spills and the all stainless steel interior has a drain at the back for any unwanted liquids. The chamber can be cleaned using chemicals or sterilized with optional UV lighting.
• Safety and quality
A door switch ensures the motor stops as soon as the door is opened. After closing the door properly, the motor restarts. The safety, reliability and quality of our shakers are of personal concern to everyone at Kuhner which is why all our machines are supplied with a 5 year warranty.
• Configuration
The LT-X can be equipped with options for CO2, O2,controlled humidity, LED photosynthesis, UV lighting and much more. It is now also possible to integrate measuring data from Kuhner shakers with your company’s own network using Kuhner Insight software together with the NET-60 interface.
Detailed technical data can be found in the product catalog.

Large incubator shaker with a minimal footprint and up to five independent shaker units
The Kuhner ISF4-X incubator shaker offers large shaking capacity with temperature, humidity and CO2 control all available. The shaker cabinet can incorporate four or even five independent shaking units which are height adjustable. The shaking diameter and speed of each unit can be individually selected. Standard diameters are 12.5, 25 and 50 mm. Other shaking diameters are possible.
Performance characteristics
• All stainless steel interior
• Large shaking capacity
• Easy access to contents
• Each shaking unit has its own direct drive
• Door heating, with controlled humidity
• Guaranteed quality
When designing the ISF4-X special emphasis was placed on reliability and durability. The high quality of Kuhner shaking machines is backed with a five year warranty.
• Safety and convenience
The large door opening of the ISF4-X allows easy access to the shake flasks inside. The doors are fitted with a safety switch to ensure shaking stops when the doors are opened.
The large windows allow a clear view of incubator’s contents. The entire ISF4-X chamber is made of stainless steel making sterilisation with chemicals possible.
• Energy saving operation
The highly efficient direct drive system means economic low power consumption and the cooling system also operates with energy efficiency.
• Electrical protection
Automatic supervision of the mains voltage protects the shaker and in the event of a voltage spike the unit disconnects from the mains. The machine resumes operation at the set values once power is restored.

ISF1-Z incubator shaker - the perfect solution for shaken cultivation processes
The ISF1-Z incubator shaker is suitable for applications in laboratories, research centers and production facilities. The ISF1-Z complies with GMP (good manufacturing practice) requirements and regulations. It offers a large shaking capacity with a small footprint and many features allowing straightforward, safe handling of any culture or product. The incubator shaker is applicable for microbial, plant, human and animal cell cultures.
Performance characteristics of ISF1-Z models:
• Large shaking capacity with small footprint
• Hygienic design according to DIN EN ISO 14159
• Improved direct drive: stronger, higher shaking frequencies, very long lasting
• Up to three machines can be stacked without additional components: incubators ISF1-X/W and new ISF1-Z mixable in stack
• Flexible and retrofittable: all options and accessories applicable
Includes all features of the basic model plus:
• Vast temperature range: from 3 to 80°C, it provides the user a greater flexibility in terms of low and high temperatures.
• Fast cooling and heating
• Low temperatures for storage and inoculum preparation
• Two cooling units with eco-friendly natural gas
• Humidifying and dehumidifying possible
Detailed technical data can be found in the product catalog.

The Kühner Rack-Shaker SBM/SS-X is a space saving shaker system designed for environmental rooms, laboratories and corridors. It is an extendable rack system with integrated shaking units made of stainless steel. Size and configuration can be altered at any given time.
Flexible, integrated system
Up to four shaking units (SS-X) can be incorporated into a single rack. The robustly built rack system ensures the shaking units run quietly. The rack system is designed and constructed for maximum flexibility, can be adapted to fit almost any room, and is easily extended. The configuration of the shaking units can be altered at any time with little effort. Each shaking unit is fitted with a speed controller and operates independently. Users are able to choose either orbital or linear motion as well as a suitable shaking diameter for each unit.
Ideal solution for temperature controlled rooms
The rack system is suitable for use in temperature controlled rooms. Racks and shaking units are made of stainless steel with hermetically sealed electronic parts.
Low energy consumption – low heat generation
The Kühner drive generates minimal heat which is an important factor when using the rack system in temperature controlled rooms.
Technical data SBM: SMX1900, SEM: SMX1901
Weight SBM: 54kg
Weight SS-X: 60kg
Interface, standard: CAN-Bus
Interface, optional: USB, Ethernet, digital, analogue
Ambient temperature: 0°Cup to 60°C
Consumption, maximum: 240 W (4 machines, max. Acceleration)
Consumption, maximum: 480 W (4 machines with high torgue drive)
Consumption, typical: 50 W (4 machines)

Are you screening using large numbers of 50ml bioreactors (TPP, Falcon tubes etc.)? Then our new EPFL-table is the ideal solution. This table accepts tube holders, each with a capacity of 24 x 50ml tubes. Each tube holder has its own clamp handle allowing it to be easily taken out of the incubator shaker and put on a clean bench while the other tubes keep on shaking. It’s also possible to shake microtiter plates on the EPFL-table, using Duetz 4-place coverclamps. If you have a Kuhner F-size tray (800 x 420mm), you can also clamp that on the table instead of individual holders.

• Test tube holder RGH-18 (24 tubes)
• For test tubes with 18 - 19 mm diameter