All products


% Binder KB 115 cooling incubators with compressor technology The powerful virtuoso in cooling incubators for microorganisms: the KB masters temperature ranges from -10 °C to 100 °C. The new KB series consumes up to 30% less energy compared to its predecessor. With its extensive programming options and homogenous incubation conditions even when fully loaded, this cooling incubator covers a wide range of applications. Benefits • Safe, reproducible incubation, even at high ambient temperatures • Disinfection routine at +100 °C • Up to 30% lower energy consumption compared to the previous model Important characteristics • Temperature range: -10 °C to +100 °C • APT.line™ preheating chamber technology • Up to 30% lower energy consumption compared to the previous model • Cooling with compressor cooling unit • Door heating system from 240 liters • Adjustable fan speed • Controller with time-segment and real-time programming • Inner door made of tempered safety glass • 2 stainless steel racks • Units up to 115 liters are stackable • Access port with silicone plug from 240 L • 4 stable castors, two with brakes, from 240 liters • Class 3.1 independent temperature safety device (DIN 12880) with visual and acoustic alarm • Computer interface: Ethernet	% Binder BF 260 standard-incubators with forced convection The BINDER incubator of the BF Avantgarde.Line series with forced convection is suitable for all gentle incubation applications, particularly under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery times. Benefits • Excellent temporal and spatial temperature accuracy • High process reliability • 100 °C disinfection routine Important characteristics • Temperature range (model 56 \| 260): +7 °C above ambient temperature to +100 °C • Temperature range (model 115): +8 °C above ambient temperature to +100 °C • High temperature accuracy thanks to APT.line™ technology • Forced convection • Controller with LCD display • Electromechanical control of the exhaust air flap • Inner door made of tempered safety glass • 2 chrome-plated racks • Units up to 115 L are stackable • 4 stable castors, two with brakes, from 720 liters • Class 3.1 integrated independent temperature safety device (DIN 12880) with visual alarm • Ergonomic handle design • USB port for recording data	% Binder BD 115 standard-incubator with natural convection The BD Avantgarde.Line series is specially designed for gentle incubation of organisms, as well as conditioning of heat-sensitive media. The new design of the units and the homogeneous temperature distribution ensure the very best results. Benefits • Excellent temporal and spatial temperature accuracy • High process reliability • 100 °C disinfection routine Important characteristics • Temperature range: +5 °C above ambient temperature to +100 °C • High temperature accuracy thanks to APT.line™ technology • Natural convection • Controller with LCD display • Electromechanical control of the exhaust air flap • Inner door made of tempered safety glass • 2 chrome-plated racks • Units up to 115 L are stackable • Class 3.1 integrated independent temperature safety device (DIN 12880) with visual alarm • Ergonomic handle design • USB port for recording data	% Binder MKF 240 dynamic climate chamber with humidity control A BINDER MKF series environmental simulation chamber is ideally suited for any cold and heat testing based on current temperature and climate testing methods according to DIN and IEC standards. The comprehensive standard equipment for this environmental simulation chamber ensures ease of operation. Benefits • Homogeneous climate conditions thanks to APT.line™ technology • Automatic water and wastewater management • Pressure humidification with fast response times • Comprehensive programming and data acquisition • Large heated viewing window Important characteristics • Temperature range: -40 °C to +180 °C • Humidity range: 10 % to 98 % RH • Integrated water-storage tank, 20 liters (Models 115, 240, 720) • 4 zero-voltage relay contacts • 1 stainless steel rack • APT.line™ preheating chamber technology • Intuitive touchscreen controller with time-segment and real-time programming • Internal data logger, measured values can be read out in open format via USB • Programmable condensation protection for test material • Heated viewing window with LED interior lighting • Humidity regulation with capacitative humidity sensor and vapor humidification • BINDER Multi Management Software APT-COM™ Basic Edition • Troubleshooting system with visual and audible alarms • Access port with silicone plug (Models 56, 115, 240: 50 mm, left) • 2 access ports with silicone plugs (Model 720: 80 mm, left and right) • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm • 4 castors, two with brakes • Computer interface: Ethernet • 230 V power socket on the right-side control panel (Models 115, 240, 720) • Adjustable ramp function • Integrated chart recorder • Real-time clock • Door heating • Alarm notification in the event of insufficient water in fresh water tank (Models 115, 240, 720) • Complete safety connection kit for water supply and drainage, up to 1 m height • Inner chamber made of stainless steel • CFC-free refrigerant R-452A • Cooling with compressor cooling unit
% Binder MKFT 720 dynamic climate chamber with humidity control The BINDER MKFT series environmental simulation chamber for low temperature alternating climate profiles is the specialist for dynamic alternating climate change between -70 °C and 180 °C. Large performance reserves and rapid cooling make the MKFT environmental simulation chamber the high-end product for complex standards-based climate tests. Benefits • Homogeneous climate conditions thanks to APT.line™ technology • Automatic water and wastewater management • Pressure humidification with fast response times • Comprehensive programming and data acquisition • Large heated viewing window Important characteristics • Temperature range: -70 °C to +180 °C • Humidity range: 10 % to 98 % RH • Integrated water-storage tank, 20 liters • 4 zero-voltage relay contacts • APT.line™ preheating chamber technology • Programmable condensation protection for test material • Intuitive touchscreen controller with time-segment and real-time programming • Internal data logger, measured values can be read out in open format via USB • Heated viewing window with LED interior lighting • Humidity regulation with capacitative humidity sensor and vapor humidification • BINDER Multi Management Software APT-COM™ Basic Edition • Troubleshooting system with visual and audible alarms • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm • Access port with silicone plug (Models 115, 240: 50 mm, left) • 2 access ports with silicone plugs (Model 720: 80 mm, left and right) • 4 castors, two with brakes • Computer interface: Ethernet • 230 V power socket on the right-side control panel • Adjustable ramp function • Integrated chart recorder • Real-time clock • Door heating • Alarm notification in the event of insufficient water in fresh water tank • 1 stainless steel rack • Complete safety connection kit for water supply and drainage, up to 1 m in height • Inner chamber made of stainless steel • CFC-free refrigerants R-452A and R-23 • Cooling with cascade compressor cooling unit	% Binder MKT 115 dynamic climate chamber Temperature ranges between -70 °C and 180 °C, with the added benefit of natural simulation, are what make the BINDER MKT series so unique. At the same time, this environmental simulation chamber fulfills the very highest precision and performance requirements for cyclical temperature tests. Benefits • Homogeneous climate conditions thanks to APT.line™ technology • Comprehensive programming and data acquisition • Large heated viewing window Important characteristics • Temperature range: -70 °C to +180 °C • 4 zero-voltage relay contacts • APT.line™ preheating chamber technology • Programmable condensation protection for test material • Heated viewing window with LED interior lighting • BINDER Multi Management Software APT-COM™ Basic Edition • Troubleshooting system with visual and audible alarms • Intuitive touchscreen controller with time-segment and real-time programming • Internal data logger, measured values can be read out in open format via USB • Access port with silicone plug (Models 115, 240: 50 mm, left) • 2 access ports with silicone plugs (Model 720: 80 mm, left and right) • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm • 4 castors, two with brakes • Computer interface: Ethernet • 230 V power socket on the right-side control panel • Adjustable ramp function • Integrated chart recorder • Real-time clock • Door heating • 1 stainless steel rack • Inner chamber made of stainless steel • CFC-free refrigerants R-452A and R-23 • Cooling with cascade compressor cooling unit	% Binder MK 240 dynamic climate chamber Benefits • Homogeneous climate conditions thanks to APT.line™ technology • Comprehensive programming and data acquisition • Large heated viewing window Important characteristics • Temperature range: -40 °C to +180 °C • APT.line™ preheating chamber technology • Programmable condensation protection for test material • Heated viewing window with LED interior lighting • BINDER Multi Management Software APT-COM™ Basic Edition • Troubleshooting system with visual and audible alarms • Intuitive touchscreen controller with time-segment and real-time programming • Internal data logger, measured values can be read out in open format via USB • Unit self-test for comprehensive status analysis • Access port with silicone plug, 50 mm, left • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm • 4 castors, two with brakes • Computer interface: Ethernet • Adjustable ramp function • Integrated chart recorder • Real-time clock • 1 stainless steel rack • Inner chamber made of stainless steel • CFC-free refrigerant R-452A • Cooling with compressor cooling unit	% Binder KBF-S 720 standard climate chamber The new Solid.Line KBF-S climate chamber is a custom-made solution for long-term testing and accelerated stability testing for pharmaceutical products in accordance with the ICH Q1A guideline. The corrosion-free and condensation-free interior also ensures exceptionally stable temperature and moisture levels, even when fully loaded. Benefits • Homogeneous climate conditions thanks to APT.line™ preheating chamber • Standard-compliant testing according to ICH Q1A • Precise temperature and humidity control Important characteristics • Temperature range: 0 °C to +70 °C • Humidity range: 20% to 80% RH • APT.line™ preheating chamber technology • Humidity regulation with capacitive humidity sensor and steam humidification • LCD to display temperature and humidity along with additional information and alarms • Internal data logger, measured values can be read out in open format via USB • Unit self-test for comprehensive status analysis • Inner chamber made completely of stainless steel • 2 stainless steel racks, incl. shelf supports • Access port with silicone plug, 30 mm, left • Robust twin casters with brakes, from 240 L • Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm • Computer interface: Ethernet • Independent water supply via tank
% Binder KMF 720 constant climate chamber The BINDER KMF ensures absolutely constant test conditions throughout the testing area. A big advantage of this constant climate chamber is its low space requirement and flexibility in terms of water supply. The wide temperature and humidity range make this constant climate chamber ideally suited for stress testing series. Benefits • Homogeneous climate conditions thanks to APT.line™ technology • Automatic water and wastewater management • Humidification with fast response times • Wide humidity range up to 98 % RH • Long-term stress testing, e.g. at 85 °C / 85 % RH Important characteristics • Temperature range: -10 °C to +100 °C • Humidity range: 10 % RH to 98 % RH • APT.line™ preheating chamber technology • Humidity regulation with capacitive humidity sensor and vapor humidification • Inner chamber made of stainless steel • BINDER Multi Management Software APT-COM™ Basic Edition • Intuitive touchscreen controller with time-segment and real-time programming • Internal data logger, measured values can be read out in open format via USB • Unit self-test for comprehensive status analysis • Tight-sealing inner door made of safety glass (ESG) • Avoidance of glass corrosion by special TIMELESS coating • 1 stainless steel rack • Access port with silicone plug, 30 mm, left • Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm • Computer interface: Ethernet • Door heating	% Binder KBF 720 constant climate chamber The BINDER KBF is the specialist for unconditionally reliable stability testing and precise maintenance of constant climate conditions. From programming to documentation, this constant climate chamber meets all critical requirements. Benefits • Homogeneous climate conditions thanks to APT.line™ technology • Automatic water and wastewater management • Pressure humidification with fast response times Important characteristics • Temperature range: 0 °C to +70 °C • Humidity range: 10 % to 80 % RH • APT.line™ preheating chamber technology • Humidity regulation with capacitive humidity sensor and vapor humidification • Intuitive touchscreen controller with time-segment and real-time programming • BINDER Multi Management Software APT-COM™ Basic Edition • Internal data logger, measured values can be read out in open format via USB • Unit self-test for comprehensive status analysis • Tight-sealing inner door made of safety glass (ESG) • Avoidance of glass corrosion by special TIMELESS coating • Inner chamber made of stainless steel • 2 stainless steel racks • Access port with silicone plug, 30 mm, left • 4 stable castors, two with brakes, from 240 liters • Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm • Computer interface: Ethernet • Door heating	% Binder CB 260 CO₂ incubator The BINDER CB series CO₂ incubator is the premium class among the CO₂ incubators. It is suitable for all sensitive incubation applications and ensures optimal cell growth. A BINDER CB series CO₂ incubator can perform complex cultivation experiments as well as specific enviromental conditions. Benefits • Maximum usable space with minimal footprint and excellent ease of use • Minimum risk of contamination thanks to uncompromising hot-air sterilization • Fanless, easy-to-clean hygienic interior without fixtures • Stable pH values thanks to drift-free CO₂ IR sensor technology • Low evaporation of the medium due to high levels of humidity and quick recovery time Important characteristics • Temperature range: +4 °C above ambient temperature to +60 °C • Humidity range: 90 to 95% RH • CO₂ control range: 0 to 20 vol.% CO₂ • Tried-and-tested anti-contamination concept with 180 °C hot air sterilization • Optimized double-pan humidification system with condensation protection • CO₂ gas-mixing jet with Venturi effect • Hot-air sterilizable CO₂ sensor with single-beam infrared technology • Intuitive touchscreen controller • Internal data recording, can be read out in open format via USB interface • Fail-safe CO₂ system for protecting the pH of cell cultures • DuoDoor™ system: Unit door and glass door can be opened with one handle • Tightly fitted inner door made of safety glass • Lockable door handle • Seamless inner chamber made of stainless steel with flanges as shelf support system • Perforated shelves, stainless steel • Troubleshooting system with visual and acoustic alarms • Interfaces: Ethernet, USB, zero-voltage alarm contact • Units can be stacked with stacking adapters; the CB is suitable for stacking with CBF and CB-S models of the same size	% Binder FD 260 drying and heating chambers with forced convection A BINDER FD series Avantgarde.Line heating oven is always used when fast drying and sterilization is required. Thanks to its fully homogeneous temperature distribution, quick dynamics and powerful fan, this heating oven saves valuable time. Benefits • Best energy efficiency on the market • Excellent temporal and spatial temperature accuracy • USB connection for recording data • Temperature range up to +300 °C Important characteristics • Temperature range: +10 °C above ambient temperature to +300 °C • High temperature accuracy thanks to APT.line™ technology • Forced convection • Controller with LCD display • Electromechanical control of the exhaust air flap • 2 chrome-plated racks • Units up to 115 L are stackable • Class 2 independent temperature safety device (DIN 12880) with visual temperature alarm • Ergonomic handle design • USB port for recording data
% Binder MKF 400 dynamic climate chamber with humidity control A BINDER MKF series environmental simulation chamber is ideally suited for any cold and heat testing based on current temperature and climate testing methods according to DIN and IEC standards. The comprehensive standard equipment for this environmental simulation chamber ensures ease of operation. Benefits • Homogeneous climate conditions thanks to APT.line™ technology • Automatic water and wastewater management • Pressure humidification with fast response times • Comprehensive programming and data acquisition • Large heated viewing window Main features • Temperature range: -40 °C to +180 °C • Humidity range: 10% to 98% RH • Humidity regulation with capacitive humidity sensor and steam humidification • APT.line™ preheating chamber technology • Intuitive touchscreen controller with time-segment and real-time programming • CFC-free refrigerant R-452A • Integrated water-storage tank, 20 L • 1 stainless steel rack • Access port with silicone plug, 50 mm, left • 4 zero-voltage relay contacts Optional equipment • APT-COM Multi Management Sofware – for managing, recording, and documenting unit parameters • Racks – option of stainless steel racks, depending on test requirements • Systems for water treatment and compressed air supply • Services – wide range of services to ensure that the unit functions correctly	% Binder MK 400 dynamic climate chamber The BINDER MK series chamber is suitable for all heat and cold tests between -40 °C and 180 °C. The MK is a clever alternative to complex individual solutions for cyclical temperature tests. Benefits • Homogeneous climate conditions thanks to APT.line™ technology • Comprehensive programming and data acquisition • Large heated viewing window Main features • Temperature range: -40 °C to +180 °C • APT.line™ preheating chamber technology • Intuitive touchscreen controller with time-segment and real-time programming • Internal data logger, measured values can be read out in open format via USB • BINDER Multi Management Sofware APT-COM™ Basic Edition • Programmable condensation protection for test material • Troubleshooting system with visual and audible alarms • CFC-free refrigerant R-452A • 1 stainless steel rack • Access port with silicone plug, 50 mm, left • Heated viewing window with LED interior lighting • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm • 4 castors, two with brakes • Computer interface: Ethernet • Adjustable ramp function • Integrated chart recorder • Real-time clock • Door heating • Inner chamber made of stainless steel • Cooling with compressor cooling unit Optional equipment • APT-COM Multi Management Sofware – for managing, recording, and documenting unit parameters •Racks – option of stainless steel racks, depending on test requirements •Compressed air supply system •Services – wide range of services to ensure that the unit functions correctly	% Binder KBF-S ECO 1020 constant climate chamber with Peltier technology Thanks to thermoelectric cooling technology with patented heat dissipation, the new KBF-S ECO climatic chamber is one of the most energy-efficient constant climate chambers on the market. The thermoelectric cooling technology means the KBF-S ECO series is also very quiet during operation. Benefits • Safe thanks to standard-compliant testing according to the ICH Q1A guideline, even with full load. • Reliable thanks to failsafe operation without compromise. • Smart, as a wide range of accessories makes it highly compatible for adaptation to specific customer requirements. • Economical, as energy consumption is minimal thanks to optimized thermoelectric cooling. Main features • Temperature range: 0 °C to +70 °C (max. 24 °C under ambient temperature) • Unit self-test for comprehensive status analysis • Inner chamber made completely of stainless steel • Humidity range: 10% to 80% RH • APT.line™ preheating chamber technology • Independent water supply via tank • LCD to display temperature and humidity along with additional information and alarms • Internal data logger, measured values can be read out in open format via USB	% Binder KB ECO 1020 Cooling incubators with environmentallyfriendly thermoelectric cooling Thanks to thermoelectric cooling technology with patented heat dissipation, the new KB ECO cooling incubator is one of the most energy-ecient cooling incubator on the market. The thermoelectric cooling technology means the KB ECO series is also very quiet during operation. Benefits • Safe: Unique condensate and dry-out protection for all operating conditions • Reliable: Fail-safe operation due to intelligent thermoelectric tempering • Smart: Temperatures programmable for intermitted incubation and refrigeration • Economical: Minimum energy consumption thanks to optimized thermoelectric cooling Main features • Temperature range: 0 °C through +70 °C (max. 26 °C below the ambient temperature) • APT.line™ preheating chamber technology • Electric temperature control thanks to thermoelectric cooling module with innovative heat dissipation • Inner door made of tempered safety glass • Inner chamber made completely of stainless steel • 2 rack, stainless steel • Access port with silicone plug Ø 30 mm • LCD to display temperature along with additional information and alarms • Internal data logger, measured values can be read out in open format via USB • Unit self-test for comprehensive status analysis
% Binder FD 720 drying and heating chambers with forced convection A BINDER FD series Avantgarde.Line heating oven is always used when fast drying and sterilization is required. Thanks to its fully homogeneous temperature distribution, quick dynamics and powerful fan, this heating oven saves valuable time. Benefits • Best energy efficiency on the market • Excellent temporal and spatial temperature accuracy • USB connection for recording data • Temperature range up to +300 °C Important characteristics • Temperature range: +10 °C above ambient temperature to +300 °C • High temperature accuracy thanks to APT.line™ technology • Forced convection • Controller with LCD display • Electromechanical control of the exhaust air flap • 2 chrome-plated racks • Units up to 115 L are stackable • Class 2 independent temperature safety device (DIN 12880) with visual temperature alarm • Ergonomic handle design • USB port for recording data	% Binder ED 260 drying and heating chambers with natural convection The strengths of a BINDER ED series drying chamber include routine drying and sterilization tasks up to 300 °C. Thanks to the natural convection, all thermal processes which use this drying chamber are highly efficient. The ED series ensures fast, uniform drying. Benefits • Best energy efficiency on the market • Excellent temporal and spatial temperature accuracy • USB connection for recording data • Temperature range up to +300 °C Important characteristics • Temperature range: +5 °C above ambient temperature to +300 °C • Up to 30% lower energy consumption compared to conventional units on the market • High temperature accuracy thanks to APT.line™ technology • Natural convection • Controller with LCD display • Electromechanical control of the exhaust air flap • 2 chrome-plated racks • Units up to 115 liters are stackable • Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm • Ergonomic handle design • USB port for recording data	% Binder KB 240 cooling incubators with compressor technology • Safe, reproducible incubation, even at high ambient temperatures • Disinfection routine at +100 °C • Up to 30% lower energy consumption compared to the previous model • Temperature range: -10 °C to +100 °C • APT.line™ preheating chamber technology • Up to 30% lower energy consumption compared to the previous model • Cooling with compressor cooling unit • Door heating system from 240 liters • Adjustable fan speed • Controller with time-segment and real-time programming • Inner door made of tempered safety glass • 2 stainless steel racks • Units up to 115 liters are stackable • Access port with silicone plug from 240 L • 4 stable castors, two with brakes, from 240 liters • Class 3.1 independent temperature safety device (DIN 12880) with visual and acoustic alarm • Computer interface: Ethernet	% Binder BF 400 standard-incubators with forced convection The BINDER incubator of the BF series with mechanical convection is suitable for all gentle incubation applications, particularly under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery times. Benefits • Safe and reproducible incubation even under high batch throughputs in long-term operation • Disinfection routine at 100 °C • Stable atmosphere by inner glass door Important characteristics • Temperature range: +5 °C above ambient temperature to +100 °C • APT.line™ preheating chamber technology • Adjustable fan speed • Adjustable exhaust air flap • Controller with timer functions • Inner door made of tempered safety glass • 2 chrome-plated racks • Class 3.1 independent temperature safety device (DIN 12880) with visual temperature alarm • Computer interface: RS 422